Question about 2003 Dodge Intrepid

Open Question

Dodge intrepid 2003 2.7 dual over head cams timing chian repacement need diagram of settings

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i set timing chian marks

The marks are on the crank and cam gears. They either have a mark on the head that coincides with the mark on the cam gear AND you set that AND then bring the crank shaft gear to TDC on the timing marks OR you have both marks on the gears and you line them up with each other using a straight edge through the center of the shafts, then you put the chain on.

Jun 03, 2014 | 1997 Nissan Maxima

1 Answer

Cam sensor

On front of the timing covers...

Apr 21, 2014 | 2003 Dodge Intrepid

1 Answer

Dodge intrepid problems

It is possible that you do not have the correct valve timing and a set of valves is hitting on a piston or two. Recheck the marks and it wrong you will have to remove the cam shafts to allow the crank to be brought up to the right position so that the valves do not get bent.

Jan 19, 2014 | Cars & Trucks

1 Answer

2003 dodge intrepid

Code 700 means you have a problem with the transmission or the control module. Code 340 is for the cam sensor for bank one.
Code 841 is for a problem with the low reverse pressure switch and that probably also set the 700 code.
Code 1776 is brand and sometimes model specific, generally speaking it is for a timing or ignition issue which could be connected with the 340 code.
I would clear the codes, drive the car, and see how many codes are reset again. Then go from there.

Jul 22, 2013 | Cars & Trucks

1 Answer

How to find and set timing marks for 2003 ford focus 2.0 16 valve with dual overhead cams ztech engine

I do not have a diagram but i do have a site with very detailed instruction on how to set the whole thing up correctly, just click HERE

Feb 10, 2012 | 2003 Ford Focus

1 Answer

2001 dodge intrepid 2.7 timing chain and cam timing diagram

i need pic diagram of all 4 camshafts and both cam wheels and crankshaft for 2001 dodge 2.7

Sep 26, 2010 | Dodge Intrepid Cars & Trucks

1 Answer

99 Dodge Intrepid 2.7L no power to ignition. Receiving Code P1684 but battery connection okay.

I have a problem with a 1999 Dodge Intrepid 2.7. Looking for some help or suggestions.

Problem: I only have a spark from the #2 coil.


Vehicle purchased from an Auction and would not start. The vehicle would only backfire. When I removed the valve covers I found that one of the rocker arms had popped out. I replace the heads with heads from a 2001 Intrepid 2.7. I used the cams, primary and secondary timing chains from the 1999 heads. Not sure if I used the original primary (left) cam sprocket from the 1999 or one I purchased in a kit from a Dodge dealership. I tried to use the new primary timing chain but it was not the same. The replacement heads were surfaced and a new head gasket was used. When I tried to start the vehicle it had no spark. The vehicle had set at several locations and parts may have been removed or changed.

Solutions Tried:

I tried 4 ASD relays with no effect. I then tested all 4 on a 2002 Intrepid 2.7 that runs and all worked. I then discovered that the Crank PS has missing. I replaced the Crank PS with one from a 2002 Intrepid 2.7 with no effect. I then replaced the Crank PS with a Crank PS from a 1999 Intrepid 2.7 and got a spark at the #2 coil only. I then replaced the PCM and TCM from the same 1999 Intrepid I got the Crank PS from and still only have spark from #2 coil. I then changed the Cam PS, still spark only from #2 coil. I have tried several coil packs on connector #2 and all have spark. Each coil pack that sparks on #2 will not spark on any other connector. Spark from #2 coil is weak.

I then replaced the wire harness from the PCM to the coils and fuel injectors and still only have spark from the #2 coil. What am I missing? Any suggestions, advice or related information will be greatly appreciated!


Keith P. Richardson


May 20, 2010 | 1999 Dodge Intrepid

1 Answer

How do you set the cam timing on a dodge 2.7 liter, between the exhaust cam and intake cam???? HELP!!

Here are the diagrams for the secondary timing chains (exhaust cam - intake cam) and the primary timing chain. (courtesy of AutoZone)



Feb 22, 2010 | 2002 Dodge Intrepid

1 Answer

I need a digram of how to replace the timing belt for 2002 dodge intrepid 3.5 single dual cam

Hello trimaineiman: My name is Roger and I will help you. A couple of things you should do is replace the water pump while you have the timing belt off. Should the pump fail later it will do severe engine damage to the engines valves. Next This engine is not a free wheeling engine. Should you put the belt on and the valve timing oi not correct. Severe engine damage will occur. By that I mean Valves in the head will be bent and/or piston damage will occur. Here is a picture of the marks. It is the best i could find. Good luck on your repairs. Should you need further help please just ask. Please rate the answer as this way I know it was helpful. Thank You for using Fix Ya. Roger7ab4161.jpg

Jan 23, 2010 | 2002 Dodge Intrepid

1 Answer

How do u put a 99 dodge intrepid with a 2.7 back in time i replaced the water pump

There are 3 sets of colored links on the timing chain two singles and one double. Line the marks of the cam pulleys up with the ones on the head, they look like holes, then line the crankshaft pulley mark with the one on the oil pump. Install the chain, lining the double mark up with the mark on the passenger side cam pulley and the other two with their respective marks on the other pulleys. Install the tensioner, rotate the engine two or three times to make certain everything still lines up and your done.

Dec 07, 2009 | 1999 Dodge Intrepid

Not finding what you are looking for?
2003 Dodge Intrepid Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides