Question about 1985 Ford F 250

1 Answer

Hi, How do I remove and replace an Ignition switch in a 1985 Ford F 250 V8 Diesel?

Posted by on

  • 1 more comment 
  • nategus1 Sep 12, 2009

    Hi, Thanks for getting back to me. I actually need to replace both. The whole keyed ignition switch.Thanks, Nathan

  • nategus1 Sep 13, 2009

    Hi, Thanks for getting back to me. I want to know how to remove and replace a keyed ignition switch? on my 1985 Ford F250 4X4. Thank you, Nate

  • Tim Spear
    Tim Spear May 11, 2010

    are you reffering to the lock cylinder, or the actual ignition switch ?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

Can't remeber if i told u how, there is a small access hole under the lock tumbler in the column trim... with the key inserted in the on position. insert a small awl or perhaps a #1 philips screwdriver into the access hole, it will release the lock, just pull out the entire unit with key

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I NEED THE DISTRIBUTOR CAP FIRING ORDER FOR A 1985 OLDS. CUTLAS V6.


1985 Oldsmobile Cutlass Salon 3.8 liter V-6

c2d787b.gif

Hope this helps.

Aug 17, 2010 | 1985 Oldsmobile Cutlass Salon

1 Answer

I need a firing order diagram for 1997 f250 351 windsor


Posted by Asker for a 1997 Ford F250 under the 1985 Ford 250 Category.
I have included BOTH the 1985 and 1997 F250 351cid=5.8L Firing Orders below...

1985 Ford F250 351CI = 5.8L V8:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
........(back)........
|..4..|........|..8..|
|..3..|........|..7..|
|..2..|........|..6..|
|..1..|........|..5..|
.......(front)
Distributor:
....(back)
[X].3...1
7............8
2............4
.....6...5.[X]-clip
....(front)

For the 1997 Ford F250 351CI = 5.8L V8:
Firing Order:
1-5-4-2-6-3-7-8
Cylinders:
........(back).......
|..4..|........|..8..|
|..3..|........|..7..|
|..2..|........|..6..|
|..1..|........|..5..|
.......(front)
Distributor:
.....(back)
[X].5...1
4............8
2............7
.....6...3.[X]-clip
.....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


May 11, 2010 | 1985 Ford F 250

1 Answer

On a 1985 Ford F250 diesel, with the 4 speed


I would replace fluid and filter. At least the fluid. Old fluid has bad temperature range protection and the inter cooler doesn't help cool the lines much.

Nov 23, 2009 | 1985 Ford F 250

1 Answer

I cant figure out how to wire a push button ignition on my 1985 ford f-150


If you're looking for wiring a push-button starter, then you just need to connect one terminal of a momentary type switch to the solenoid (little) post on your starter, and the other wire to a ground source. This will only crank the engine, so you would need an additional switch, or the actual ignition switch to switch on the accessories, and the ignition system.

Oct 20, 2009 | 1985 Ford F 250

1 Answer

1985 ford f250 towing capacity


Should be listed on the sticker on the door post.

Oct 18, 2009 | 1985 Ford F 250

1 Answer

I have a 1985 Ford F250,automatic,460,4x4. I have


Definately sounds like an ignition problem. Try changing the ignition control module on the driver's side fender well.

Aug 22, 2009 | 1985 Ford F 250

1 Answer

Tried to turn ignition over on my 1987 F-250 diesel and there was no tension when I turned the key. Wait to start engine light and everything electrical appears to work. I replaced the ignition but that...


Your switch behind the ignition barrell needs to be replaced.As this has the tention built into it.Switch has got hot and burnt out the spring and contact

Jul 13, 2009 | 1987 Ford F 250

1 Answer

Fuel Tanks reversed , Gauge not reading?


The Ford trucks were recalled for the tank switch replacement. Somehow the switches would pump fuel from one tank to the other. This would cause the one tank to overflow and or result in a fire from hot exhaust temps coming into contact with the fuel. Check the dash tank switch. It is probably bad.

Mar 12, 2009 | 1985 Ford F 250

1 Answer

Need to know how to replace a foot dimmer switch on a Ford F-250


lift corner of rug up there are 1 or 2 screws holding it down remove screws and unplug switch

Dec 18, 2008 | 1985 Ford F 250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...