Question about Ford Mustang
The connecter ends are getting hot and are losing connection at the light. You can fix this and test this out by removing the light plug from the light and squeeze the connectors together to make better contact. You can get a connector kit also to replace the connectors with higher amperage connectors. Because of the higher amperage draw for these lights old connectors will open up when under load. The reason you may have taken a long time to get an answer is you had this listed as a Ford mustang in air rachet catagory.
Posted on Sep 12, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The interior lamp switch is in the ON position.
The keyless entry transmitter unlocks the doors (illuminated entry).
When the key is removed from the ignition switch with all of the doors closed, the courtesy lights light for approximately 25 seconds before fading out.
Battery positive voltage (B+) is applied at all times through the IP fuse block CTSY LP/PWR MIR fuse 6A via CKT 640 (ORN) through the body control module (MALL) to the courtesy lights via CKT 1732 (ORN). The MALL provides a ground through CKT 156 (WHT) for the courtesy lights under the following conditions:
The MALL receives an input from a door being opened.
The MALL receives an input from the interior lamp being turned ON.
The MALL receives an input from the doors being unlocked using the keyless entry transmitter.
The courtesy lamps then light.
When the courtesy lights are activated by opening and closing a door, the courtesy lights will remain on for approximately 25 seconds before fading out after all of the doors are closed. If the ignition switch is turned to START or RUN within the 25 seconds, the lights immediately begin to fade out. If a door is left open, the MALL removes battery positive voltage (B+) to the courtesy lights after 10 minutes. When the courtesy lights are activated by the interior lamp switch, the lights remain on as long as the interior lamp switch is in the ON position. When the courtesy lights are activated by unlocking the doors using the keyless entry transmitter, the lights remain on for approximately 40 seconds. If the doors are locked using the keyless entry transmitter within the 40 seconds, the lights immediately begin to fade out.
Body Control Module (MALL) Diagnostic Mode
For a detailed explanation of the MALL module diagnostic mode, refer to Body Control Module Cell 51.
What interior light ? Dome , courtesy lights etc....They don't work with switch, keyless entry , door opening ?
Dec 03, 2015 | Buick Cars & Trucks
Feb 22, 2015 | Ford Cars & Trucks
May 14, 2017 | 1998 GMC Sierra
Sep 01, 2012 | 2006 Mitsubishi L200 2.5
Apr 22, 2010 | 2003 Ford Excursion
Feb 25, 2010 | 1999 Toyota Avalon
Sep 10, 2009 | 2001 BMW 325
Jul 22, 2009 | 1999 Pontiac Grand Am GT
Dec 15, 2008 | 2004 Ford Freestar
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: