Question about 1994 Ford F250 Supercab

2 Answers

Truck wont start after the engen was washed 94 Ford turbo diesel

I was looking for a fuel leak and a mechanic told me to rinse the engen down. I did, and afterwards it will turn over but wont start. I have good fuel pressure and amps to everything. Any ideas?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Well for 1 THERE IS NO DISTRIBUTOR ON A DIESEL!!!!! The problem is more likely the wiring on the injector pump, should only be about 4 wires, check each one for voltage, if all good, then move on to the harnesses. Or on a sunny day, open your hood and plug in your block heater to dry it out.

Posted on Feb 22, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

You probably have water under the distributor cap, wipe it out, spray some WD 40 in it, and wipe it out again... see if that doesn't do the trick

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F 450 won t start


does it have fuel pressure??is the auto shutoff (fuel cut off ) working..

Jan 05, 2014 | Ford Cars & Trucks

1 Answer

2001 BMW 530 DIESEL (E39)


LEAKS AT THE INJECTION PUMP CAN BE COMING FROM DIESEL INJECTION PUMP DRIVE GEAR INNER SEAL.LOOK FOR LEAKS AT FUEL SHUT OFF VALVE AND COLD START VALVE.

Jul 08, 2010 | 2001 BMW 5 Series

3 Answers

Why is my 99 ford F450 7.3L turbo diesel blowing


Does any one have a idea a friend here has changed ecm, inj, fuel pump checked conector at fire wall ,fuel and has a short wrecker tow f450 99 and will be going down the road and he says the thing just loses all power and kind of just won't do over 15 to 20mph and lets it sit and he says it will do it again. I am not sure how long it takes but since I don't work on diesels I figured I would have the experts that do if anyone knows it's you guys any help he is in Charlotte NC I can put you with this guy he has had it to all the parts changers and no luck Thanks Mark 704 492 1647

Feb 06, 2010 | 2002 Ford Super Duty F 450

1 Answer

I have a 94 turbo diesel ford and it sounds like it his a mis


what you need to do is add some sulfur additive to the fuel to build the viscosity rateing and also check the glow plug realy itselfs to make sure when it fires that voltage is actaully getting to the glow plugs

Jan 19, 2010 | 1994 Ford F350 Crew Cab

2 Answers

Looking for name of part goes on 94 6.5 diesel bottom of fuel filter reservior connects with screw on ring has shaft that slides in middle of filtr and wires coming out bottom


94 chevy 3500 dually 6.5L turbo diesel - starts fine- then sometimes when hot, turns over but hard to restart, sometimes when driving and I accelerate it hesitates or misses as if not getting fuel I let off of pedal then re-accelerate and smooths out - any idea ?

Jan 17, 2010 | 1994 Chevrolet C/K 3500

1 Answer

No electric pulse to injectors on 1994 ford f350 diesel turbo 7.3


Im confused how do you have a direct inject diesel in a truck made 3 years before ford had such a thing 94(suposed to ) has a indirect inject diesel there is no electric wires running to the injectors there's only a pipe with very high pressure fuel running thru it
are you sure your not confusing the glow plug wires ?
they only get power to them for like 30 seconds when first starting it

whats the real problem?

Oct 27, 2009 | 1994 Ford F350 Crew Cab

2 Answers

I have a 2000 ford f250 super duty and my engine turns but wont start. It ran fine the other day then i let it sit for a day then try to start it and now it wont start this is the second time it happen to...


possibly the fuel pump check the fuel pressure with a gauge on the fuel rail if its a gas motor, is it diesel if so your in luck cause im a diesel mechanic

Oct 02, 2009 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Ive a Ford F-250 diesel 2001 , it was no power and Idid put a new fuel filter and a new air filter but still no power, now what can I do about thes problem


This is caused by a simple problem This engine has two fuel pumps the one on the side of the block wears out and does not pump enough fuel into the main fuel pump causing it to lose power so replace the fuel pump on the side of the block First. this should cure the problem assuming the engine is in good mechanical condition.

Sep 30, 2009 | 2001 Ford F250 Super Duty Super Cab

1 Answer

1996 turbo deisel fuel and oil leak.


The fuel pump is located under the turbo on that truck. It is most likley washing sediment/old fluids out of the vally of toyr engine. It is also driven by a push rod that ths cam drives, so the lower pump o-ring may be leaking too. You can change the fuel pump without pulling the turbo. Good Luck

May 09, 2009 | 1996 Ford F250 Crew Cab

Not finding what you are looking for?
1994 Ford F250 Supercab Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...