Question about Chrysler Neon
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have a 2000 Honda Accord EX, it shifts normal on forward with no problem. Also when the car is cold the reverse gear works just fine, but when the car runs for about few minutes the reverse gear will not work. It will seem as if it wants to go but then if feels like its neutral.
Posted on Nov 24, 2008
I can't find any reference to an adjustment in the overhaul manual, so i will assume this means no adj ness. or provided for.
Posted on Mar 24, 2009
Don't have specs on band but the rule is that it should be close enough to the drum to engage without slamming, and loose enough to permit drum to turn without band dragging on it. Biggest problem I've seen people have when adjusting is that adjustment tightens down while turning lock nut. To avoid this, I usually adjust a bit looser than final adjustment so it tightens to correct position instead of becoming too tight. Don't drive 'till you have it right or you will burn band surface. When engaged in reverse, band should be applied and cannot drag. If you adjusted another band, check that one for improper adjustment.
Posted on May 10, 2009
The best way to adjust it is to hook a pressure gage to the TV pressure port located on the left side of the transmission just ahead of the linkage. You want it to be a zero at idle but pressure starts moving as soon as you move the linkage.
Posted on Jun 14, 2009
Slow, slipping or no reverse: “lo-reverse” clutches are worn out,
fluid leak in the reverse apply circuit. It is
possible to remedy a fluid problem by removing the checkball from its
cage in the case in the trans may help (must remove
valvebody), or adding a high-viscosity additive such as Lucas
Transmission additive or other seal restorer product. May also have worn
boost valve (can replace in the pan).
Thank you for using fixya and good luck
Posted on Apr 10, 2010
Tips for a great answer:
NO REVERSE ON TRANSMISSION
can be issue with gears or problem with transmission and needs to be rebuilt.
Also get the tranny fluid checked. If it's low, then such problems
troubleshoot these types of issues, check the actual solved problems with these
types of issues.
are solved help links provided below: -------
the link below and go through the details and diagrams to troubleshoot the problem:
2003 Lexus RX300: Transmission Fluid Burnt Brown and not
Shift to reverse?
2007 Chrysler 300: Transmission Stuck in Park?
2000 Toyota Camry: Transmission slipping and Stuck up?
1996 Toyota Corolla: Transmission Shift Interlock will not
Lexus LS400: Transmission or Torque Converter?
CV AXLE stuck in Transmission?
Transmission in reverse, acts like it's in neutral?
Delayed shift and harsh Shifting?
Dodge neon wont go in reverse?
Dodge Automatic transmission will not go into reverse?
Dodge manual transmission will not go in reverse gear?
Transmission is making buzzing noise?
1998 Dodge Ram: Not Shift To Reverse?
Transmission leak on Toyota?
Automatic transmission, with no reverse?
No Movement When Transmission is Shifted to Drive or Third?
While going in reverse mode Fuse number 27 blows on Ford
These will help.
Feb 15, 2013 | Cars & Trucks
Nov 25, 2012 | Cars & Trucks
Apr 23, 2011 | 1987 Oldsmobile Cutlass Supreme
Feb 21, 2011 | 2000 Dodge Neon
Aug 27, 2010 | 2000 Dodge Neon
May 19, 2010 | 1997 Dodge Caravan
May 10, 2009 | 1997 Jeep Wrangler
Jan 29, 2009 | 2000 Ford F250 Super Duty Crew Cabs
Aug 05, 2008 | 2000 Dodge Durango
161 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: