Question about 2000 Ford Expedition

2 Answers

Got a hole in a/c condencer under dashboard behind glove box. do i have to take out dash board to fix?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Inorder to get to the condensor you will have to take the dash board out or move it back enough to gane axcess to the condensor unit.

Posted on Sep 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,922 Answers

That would be your evaporator core,go to your local library and look in a "Chilton's Auto Manual"this book has all the info and pictures for all types of auto repairs of all makes/models and will explain how, all evap cores come out differently

Posted on Sep 12, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the fuse box for the dash assembly [wipers,radio,etc] in a 1998 kayo e350 motor home

An E350 is probably a Ford Econoline Chassis. It's probably in any of the 4 places that all fuse boxes are: 1) under the dashboard near the driver side. 2) On either side of the dash board hidden by the closed door(open the door to see an access panel) 3) behind the glove box or 4) in the engine compartment. These things begin as a cab and a chassis so it has to be any where from the cab forward. The remainder is part of a separate system with the battery an exception. Good luck.

Aug 16, 2015 | Cars & Trucks

2 Answers

How to replace heater core in 2002 oldsmobile intrigue

most heater cores are behind the dash board on the passenger side.Look inside your engine u will see two hoses running to the firewall on the passenger side.They r going to your heater core.Sometimes you have to remove the dashboard completely it all depends on the car.

Oct 08, 2013 | Cars & Trucks

1 Answer

How does the cd player stereo come out?

Remove the two end panels on the dash. These are the panels that are located on either end of the dashboard. Place a rag over the tip of a flat tip screwdriver and wedge the tip behind the panel. Then pry the end panel off the dash. Do this for both panels.Remove the nine screws holding the glove box in place. Remove the two screws under the side panel on the passenger side (removed in step 1), four inside the glove box, two under the glove box, and one in the bottom left corner of the glove box (you can only access it after removing all of the other screws and extending the glove box down beyond what is normally allowed with the other screws in). Remove the screws holding the dash on under the steering wheel. Remove the two under the panel on the driver's side panel (removed in step 1), three on the underside of the dash, one on either side of the steering column, and one near the bezel covering the stereo.Pull the dash off from around the stereo controls.Remove the clip and wiring for the hazard switch using a flat tip screwdriver.Remove the six screws holding the HVAC unit and stereo unit in place and pull the stereo straight out of the dash. Unplug the electrical connection from the back of the stereo.

Jan 10, 2011 | 2006 Pontiac G6

1 Answer

Mercedes-Benz 1995 C-Class micro filter location

It's under , better to say behind the glove box .
You have to access it from under dash.
Remove kick panel under the dashboard and you will see it.
If you buy NIPPON filter , there is instruction in the box.

May 05, 2010 | 1995 Mercedes-Benz C-Class

1 Answer

How to remove the dashboard so that i can change the heater core so far i removed everything but the top part. my heater core is behind the radio but i do not know how to get to it.

not an easy job - steering column needs to drop down - bolts under dash - bolt on each side above hood release and glove box behind kick pads - top of dash should have 4 screws going towards windshield - with glove box - radio - temp control -gauge cluster out - any other brackets and bolts should be seen - heater core box will have to come out as unit - freon lines to be disconnected - a/c system will have press. in lines

Sep 24, 2009 | 1995 Pontiac Grand Am

1 Answer

Finding the blower resistor 2002 Expedition

u must remove the hush panel under the glove box to see the part.

Jul 23, 2009 | 1999 Ford Expedition

1 Answer

Removing dash board from 1969 chevelle

you will find bolts in the defrost air vents and under any speaker covers. also in the glove box. make things easy and remove the windshield first. can be done with the windshield in place but much harder.

Dec 04, 2008 | Chevrolet Chevy Cars & Trucks

1 Answer

Switch on dash board will not switch on blower fan i tried the fuse and the relay so i think it may be the switch so how do i go about removeing it

You need to check the ressistor under the dashboard, behind the glove box if that isn't it then replace the switch which you can get cheapier at a salvage yard or on ebay. I just did this and anew switch is $55.00 at my local Ford dealer.

Nov 19, 2008 | Ford Focus Cars & Trucks

3 Answers


There are 2 fuse boxes. One is under the hood, in a black box just behind the battery. The second is to the left and below the steering wheel, behind the dashboard panel. There are two plastic slotted fasteners that hold this dash panel in place. Use a nickel and turn each one 1/4 turn to the left. The panel is hinged on the bottom.

Oct 17, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides