Question about 1998 Pontiac Bonneville

2 Answers

There are two bolts that we are having trouble

We are trying to remove a waterpumb from a 1998 Pontiac bonneville and there are two bolts that we are having trouble removing

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Liquid wrench does a very good job in loosening the stubborn bolts. Try it a few times.

Posted on Sep 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 580 Answers

Use lots of Wd40 & let sit for 10 mins. minimum. Use an air ratchet if you got one. Otherwise use a ratchet hold palm at bottom near socket & with palm of other hand strike in sharp blows. This action will jar them loose usually.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing a starter for a 1998 bonneville...Have replaced battery and starter but when starter engages gets jammed on fly wheel and doesnt turn. Shimmed and still doesnt turn


first check to see if motor will turn over put socket on bolt on crankshaft pulley if motor doesn't turn over u have a seized motor
if it does turn over than i remove tranny and check to make sure flywheel is bent or cracked

Nov 14, 2010 | 1998 Pontiac Bonneville

1 Answer

Battery Trouble


should be a latch or 1 bolt , check your owners manuel , call the auto parts store, or try ask .com as a search engine , type in how to change battery on a 2000 bonneville or stuff simaler to that i thought your battery was under the driver side wheel well alot of pontiacs are

Aug 02, 2010 | 2000 Pontiac Bonneville

1 Answer

Where is the starter located on a 1999 pontiac bonneville


Open the hood, look down behind the fans on the front of the engine at the bottom right side. You will need to disconnect the negative battery cable; jack up and safely support the car, get underneath, remove the wide plastic splash pan (10 mm bolts) that goes between the bumper and the front crossmember. Once that is out, you can easily see - and remove - the connections on the starter. One big one, (15mm?)a positive cable from the battery, and one little one, (5/16 or 9/32) from the trans. Remove the 2 plastic flywheel covers. (10 mm bolts - Gotta kinda twist the one to get it out.) Then remove the two 15mm (head) bolts that hold in the starter. Make note of any shims that fall out when you remove the starter.

Apr 10, 2010 | 1998 Pontiac Bonneville

1 Answer

1998 bonneville transaxle sensor


If you are talking about the speed sensor, it is on the passenger side at 1 o'clock to the axel entering the trans case with your back to the pass wheel. It is held in with a 10mm bolt. twist it back and forth a little before you try to pull it out.

Hope this helps

Jan 01, 2010 | 1998 Pontiac Bonneville

1 Answer

Trying to change water pump on my 1998 bonneville ssei, there is a bolt behind the power steering pump. do i have to remove power steering pump? if so, how?


Ok here it is. Remove the two bolts thru the holes in the power steering pump pulley. Leave the power steering pump where it is just move it aside a little to access the bolt or bolts. Then it is hard to line up the power steering holes to the block so be careful and good luck.

Aug 26, 2009 | 1998 Pontiac Bonneville

1 Answer

Removal of starter on Pontiac bonneville?


13 and 15 mm bolts for the starter itself. 10 and 13mm for the wiring harness. Should be dead center underneath the front of your motor.

Jul 08, 2009 | 1998 Pontiac Bonneville

1 Answer

Trunk wont open where is emergency switch inside trunk


I had the same problem as you. Take out the back seat and there is a large access hole to the interior. There are two bolts that are fairly easy to get to. Remove them and the truck latch is removed from the lid and trunk will open.

Apr 24, 2009 | 1998 Pontiac Bonneville

Not finding what you are looking for?
1998 Pontiac Bonneville Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...