Question about 1989 Ford Crown Victoria

2 Answers

1989 crown vic won't start

The timing has been checked, fuel pump , has new plugs , distributer and button, it will turn over but not start it is like something is tellintg it not to go . someone suggested a module , or is there a computer in there, don't have the money to pay labor have to try and fix it our selves. any help would be greatly appreciated . it sounds like it wants to start but it won't , even checked the catalyst. not the problem fuel shoots out of the top where you test it . but after you turn it over it sounds like it is running out of juice but that is not the case . it seems as though something is telling it not to run

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Yes there is a computer, you might want to have your ignition moduel checked out to see if it is ant good if not replace it , ifit is okay, have the computer checked out.

Posted on Sep 12, 2009

Testimonial: "had it checked out of 3 times it checked bad 2 my husband is putting the new one on thanks hopefully this will be it I pray that it is "

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Spark plugs flooded , bad ignition module

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced fuel pump in my 99 ford crown Vic but still won't start


can you hear the fuel pump working if not check the wiring and power and ground by the tank. check fuel pressure, as if its low it won`t start, you can get bad new parts. do you have spark at the plugs. check for codes. just some places to start.

Apr 07, 2015 | 1999 Ford Crown Victoria

3 Answers

Crown vic 2005 no start replaced fuel pump


check your crankshaft position sensor. fuel+spark+compression+timing=ignition.

Mar 13, 2014 | Cars & Trucks

1 Answer

1999 ford crown vic won't start. changed fuel


Maybe your problem is with the one or many injectors, if just one is bad, you will have problems. Get yourself a multimeter and set it to read in ohms and find what spec the injectors should be at. If out of spec, then you need to replace that one injector(s).

Mar 25, 2013 | Cars & Trucks

1 Answer

I drove my 85 ltd crown vic to work fine. After a long day of work she wouldn't crank just turn over. I have changed the distributive module and cap and the rotor button. The timing was reset also


is it getting gass if u got spark to the plug's it should start.dump alittle gas down carb or throttle body making sure to replace air cleaner or snorkle and try and start.if starts could be fuel pump.

Mar 03, 2013 | 1985 Ford Crown Victoria

1 Answer

1992 ford crown vic working fine, next day no power to fuel pump or cut off switch


  1. Hi Domino, The fuel shut off is powered by the fuel pump relay (which is in the engine compartment fuse block) the fuel pump relay is powered by the EEC power relay(PCM relay) you will have to check for distribution and voltage. I hope this helps!

Aug 31, 2010 | 1992 Ford Crown Victoria

1 Answer

Crown Vic wont turn over.


I would check the plugs around and on the engine. Also check to see if the inertia switch in the trunk was tripped, that cuts off power to the fuel pump in an accident.

May 11, 2010 | 1984 Ford Crown Victoria

1 Answer

I have a 1989 Ford Crown Vic. Here lately the car will die going down the road. It will usually start right back up. SO, I replaed the in line fuel filter and it was fairly dirty. It ran great for a few...


Most likely the fuel pump,when the fuel filter gets that restricted,it most of the time,is not long before the fuel pump goes out,because of the strain on the pump.

Apr 23, 2010 | 1989 Ford Crown Victoria

4 Answers

My 99 Crown Vic acts like it isn't getting gas


check for clogged fuel filter first, usually the pump works or it dosen't, check and get back to me.

May 01, 2009 | 1988 Ford Crown Victoria

1 Answer

Need to know how to reset a fuel pump for a 86 crown vic


check in the trunk area usually on the right side for a fuel cut off switch. it's a small red or yellow button mounted on the side of the trunk behind the upholstrey. just press that button turn the key on for 5 seconds. turn it off then try starting the car.

Jun 04, 2008 | 1986 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...