Question about 1996 GMC Jimmy

1 Answer

Im takeing out my motor out of a 96 jimmy and i dont know how to take out mty tranmission

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 2,002 Answers

Remove the driveshaft, or both if 4x4. Remove the starter and if automatic remove the inspection cover by the starter and unbolt the torque converter. Don,t lose these bolts, they are special order only from the dealer. Unhook your linkage and wiring. Put a jack under the trans with a block of wood between it and the pan. Unbolt the transmission crossmember from the frame and the trans from the engine.Remove the crossmember and slide the transmission back and lower the jack. Hope this helps.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know where the vacuum lines for the 4l60e tranmission go in a 93 S15 gmc Jimmy


94 chev truck 4x4 350 put new injectors in now it idles to fast what to do (trottle body)

Feb 07, 2010 | 1993 GMC Jimmy

1 Answer

Transmission for '96 GMC Jimmy


prob 2 to 3 hun to take it out and put another in but it depends on where you get it on how much it is,, look on ebay i always find good deals there

Nov 11, 2009 | 1996 GMC Jimmy

1 Answer

My 95 jimmy sputters when taking off.


Plugs, wires, fuel filter, vacuum leaks

Jul 21, 2009 | 1995 GMC Jimmy

2 Answers

No torque converter cover plate


remove the starter and get the bolts through there. let me know

Feb 11, 2009 | 1998 GMC Jimmy

2 Answers

Where's the starter located on a 96 nissan maxima


on the side of the motor... don't know which side... where it meets the transmission.

Robert

Please take a moment to rate this solution

Jan 21, 2009 | 1996 Nissan Maxima

2 Answers

Loud Ticking/knocking Noise From motor; What is it?????


could be yur water pump going do you leak anti freeze or oil? also if a older model could be ot of timeing check your distributor cap and see if its loose
good luck

Jan 21, 2009 | 1996 GMC Jimmy

4 Answers

What transmission interchanges with a 98 4z`x4 Blazer


sorry but your stuck with the 4l60e if you want it to be right. as for using the bravada transmission thats fine you just have to use your transfer case. your transfer case uses a switch on the dash and an electric motor on the transfer case. the bravada uses a series of sensors on the front and rear axle that sense wheel slippage and send a signal to the electric motor on the transfer case causing it to lock in four wheel drive. when the sensors dont sense wheel slippage any more the system returns to two wheel drive. that,s why they call it smart track. just unbolt your transfer case from your transmission and bolt it to the bravada transmission and install it. p.s- dont forget to at least change the front pump converter seal. for 4 or 5 bucks it,s cheap insurance against a major leak and i dont think you want to pull that transmission out again and yes i saw that happen to many times. good luck.-G.J.M

Jan 04, 2009 | 1998 Chevrolet Blazer

1 Answer

Gmc 2500 tranmission


1993 gmc 2500 transmission interchange what years????
google transmission identification

thats the first step i thats how i found mine i have a 1993 gmc c2500 extended cab and here's the options TH700R4 ----4L60---- OR A 4L60E SO GOOD LUCK im trying to find out what years interchage

i heard if u have a 4.3L its 83-97 or 350 is 81-96

Oct 20, 2008 | 1993 GMC Sierra C2500

Not finding what you are looking for?
1996 GMC Jimmy Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...