Question about 2001 Jeep Grand Cherokee

1 Answer

Grand cherokee 2001 flashers dont work but hazards do...v odd??

I have an intermittent problem, where the flashers will stop working but the hazards will work just fine. it is not just the dash tell tale lights that stop it is the external lights. neither directions work.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

The hazards and the flashers are on seperate circuits.When the flashers are working properly you will hear a clicking during operation.If not,check all the bulbs.If both flashers don't work it may be a blown fuse,faulty flasher unit or a loose wire or connection.Probably the flasher unit.Make sure the new one is the same as the old one by comparing the two,On yours,its a combination flasher and hazard unit.It will need to be replaced.its small and cost is minimal.When you do replace the unit,disconnect the neg. cable from the battery.The unit relay may be blue in color.Hope this helps

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 Jeep Grand Cherokee turn signals stopped working. The indicator light/chime also stopped working. Tried flasher relay and a new switch but still not working. Hazards work fine. Any ideas?


Did you check power an grounds with volt ohm meter ? you replaced the combination flasher ? Did you check fuse # 20 & 4 in the underhood junction box ? Pull the flasher relay an check for voltage in an voltage out , need a wiring diagram to do that ! Go www.bbbind.com free wiring diagrams !

Jul 24, 2015 | Jeep Cars & Trucks

1 Answer

Hazard Flashers


Replace the multi- functioning switch. it operates the turn signals,4way flashers,wipers and headlights.those are very common problem

Jan 03, 2014 | 2001 Jeep Grand Cherokee

1 Answer

I need to know how to replace the electronic flasher for my turn signals on my 2001 grand am se. My turn signals only work a quarterof the time.


are you sure you don`t have a bulb filament that is making and breaking contact causing the flasher to intermittently work.assuming you mean they either stop flashing or flash faster than normal.when the flashers are working look under the dash and find the flasher unit with it operating.all you have to do is pull the flasher out of its location and install in reverse.i say check with the signals working because the hazard flasher looks the same but is a different unit.

Jun 09, 2011 | 2001 Pontiac Grand Am SE

2 Answers

Cannot find flasher unit 4 ways work nornal


asked aa man also if four ways work and flashers dont its a fuse box is at side of accelarator under dash on 2001 model

Dec 07, 2009 | 2001 Suzuki Vitara

1 Answer

Signals and hazard flasher lights not working for 5 days. They would work sometimes before, but now not at all. it is a 2001 jeep grand cherokee


Likely the controller has failed...located on the right of the steering column under the dash. Most larger parts stores have someone that can point it out to you.

Nov 25, 2009 | 2001 Jeep Grand Cherokee

2 Answers

Turn signals hazards flasher don't work jeep cherokee replaced combination flasher relay, turn signal switch and still no signals


I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Sep 27, 2009 | 1999 Jeep Cherokee

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...