Question about Toyota Yaris

Open Question

It seems the revs hang on when I change gears on my Yaris. Is this a common feature on their electronic accelerator or is this a problem?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power when in gear need to rev up accelerator. What can be done?


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Dec 05, 2015 | 2008 Toyota Yaris

1 Answer

Is it normal for the revs to stay up when changing gear in a 2002 4x4 3.0L turbo diesel navara?


do they revs drop off when taking pressure off accelerator pedal when out of gear? if only staying high during gear change it would suggest a worn clutch friction/pressure plate so the engine isn't slowing down when clutch is depressed .I'd also have the OBD codes read to see if there is a sensor/switch at fault , but sounds like the clutch to me

Jun 21, 2014 | Nissan Navara Cars & Trucks

1 Answer

Hi I have a 2002 Corolla with an apexi, when driving it can start to splutter a bit and I have to put my accelerator down fully just to maintain the revs, then as the car slows I have to change down a gear...


Most common problem is the IAC(Idle Air Control) valve.But if you say some times work I will suspect the throttle is clogged. Remove the Air hose,apply full throttle and hold, spray carburetor cleaner on clot using thin long nose player clean inside wall and throttle. don't spray directly inside because the carb cleaner is to aggressive for some of the gasket.
Good Luck

Apr 03, 2014 | Toyota Corolla Cars & Trucks

2 Answers

Toyota yaris will not accelerate past 40 mph


sounds like transmission is sliping

Feb 01, 2013 | 2009 Toyota Yaris

1 Answer

2007 yaris 90,000ks. While idling the car starts shuttering randomly and the rpm goes up and down as my foot is on the break. Sometimes the engine revs by itself and the car returns to normal but it has...


Check the following for:
- Vacuum leak.
- Intake manifold gasket/ seal leak.
- Throttle body seal leak.
- Check Valve clearance.
- Electronic throttle control system.
- ECM power source circuit.

Dec 29, 2011 | 2007 Toyota Yaris

1 Answer

Engine over-run between gears


This is a very common problem for ford. I have the same thing every day. It is the computer not reading the temp. When it does that just tap the gas pedal.

Jul 19, 2009 | 1992 Ford Escort 4 Door

1 Answer

Hang up in third gear loss of power


Hi All

I have a s40 1.9d / 2000 plate,
In the last month or so the car loses revs when changing up to 3rd and 4th gear, I can only get 50 mph max in 3rd gear 80mp in 4th.
The car has just clocked 185,000 miles
Its a great car but a pai at the moment, I've had a service including fuel fillter change added fuel cleaners to the deilsel all to no avail


Any suggestions

Jul 06, 2009 | 2000 Volvo S40

1 Answer

Grinding sound on pressing clutch in at high revs


The grinding sound may be a throw out bearing or the pilot bearing. The sticking throttle problem sounds like a linkage or cable binding up from possibly damage due to the impact from the accident.

Feb 05, 2009 | 2008 Toyota Yaris Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...