Question about 1996 Jeep Cherokee

Open Question

I have a 1996 cherokee and the lever to turn the headlights on and off came loose(the whole part wobles behind the dash.) So to turn off my headlights I have to kinda of shove the knob in and see if it turns off. Any one know an easy way to fix this?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashlights out/running lights out 1996 Jeep Grand Cherokee Replaced headlight switch no luck all fuses are good too


Running / Park Lamps are controlled by a BCM body control module and park lamp relay ,located in the junction block . The dash lights are also controlled by BCM . The BCM receive a voltage input from the headlamp switch ,then it turns on a driver (transistor) that turns on the dash lights . Before getting to involved and taking the dash apart looking for the BCM , Have it check for DTC'S - diagnostic trouble codes in the BCM . Your going to have to take to a repair shop for that . Your best bet would be to take it to a qualified repair anyway .

Dec 29, 2016 | 1996 Jeep Grand Cherokee

1 Answer

Alarm system wiring diagram


in the center of the dash behind the radio impossible to get to unless you tear the whole dash out try pulling the fuse

Jan 30, 2013 | 1996 Jeep Grand Cherokee

2 Answers

Turn signals come and go


if you meen come and go by nothing happens when you use turn sig lever up or down you dont get green arrow light on dash or hear sound sounds like gms multifunction switch its behind steering wheel and works wipers,turn sigs,brights and headlights on some models hazzards too thier pricey too

Aug 23, 2012 | 2002 Pontiac Grand Am

1 Answer

Replaced lightswitch on 96 Jeep Cherokee. When I turn the headlights on the parking lights go out


are we talking blows a fuse or just turns off... if it just turns off then you might check your wires. you may have put the parking lights on the dash lights and not the parking lights connector....

May 29, 2010 | 1996 Jeep Cherokee Sport

2 Answers

1996 jeep cherokee sport. HEADLIGHTS, HEADLIGHT KNOB


no you will need to replace the head light switch assembly

Jan 24, 2010 | 1996 Jeep Cherokee Sport

1 Answer

Looking for instructions on how to replace headlights on a 1996 Jeep Grand Cherokee; purchased replacement fixtures, but can't figure out how to remove/replace.


Is this the headlight bulb replacement or headlight (assembly) replacement? For bulb replacement:
1. Disconnect negative side of battery.
2. Open hood.
3. Reach behind the neadlight assembly and disconnect the wiring connectors.
4. There is a locking ring around the back of the headlight assembly. Turn this counterclockwise.
5. Gently pull out the bulb.
6. Insert new bulb into the locking ring.
7. Place these back onto back opening and turn clockwise making sure it is flush and totally engaged.
8. Replug wiring connector.
9. Reconnect negative side of battery.
10. LIGHTS!!

Nov 25, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Instrument Panel goes on and off, as do headlights


You have to remove the panel to check onthe connections behind it, also check the headlights switch, they tend to burn out.

Jul 25, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Headlights


You could have 2 bad headlight bulbs.
You have to check the fuses for your dash lights.

Oct 21, 2008 | 1996 Jeep Cherokee Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...