Question about 2000 Toyota Tundra

1 Answer

Broken latch cable on 2000 Tundra, will not open

How do you replace a broken latch cable on 2000 Tundra, drivers side door will not open from inside.

Posted by on

  • cybeerdrinke Sep 12, 2009

    The door panel is off but have not tryed to take latch off door yet.

  • matthew kuhl May 11, 2010

    Are you certain it is a cable? These are generally operated by a solid link. Have you removed the door panel yet? This is easy enough, and you may find that the link has come apart or there may be a plastic intermediate part that has broken. Good luck, matt

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

Remove the door panel, i believe the handle uses a cable on the link... simple fix

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Handles latch


Must take the inside panel apart replace broken cable.

May 27, 2014 | 2000 Lincoln LS

1 Answer

Hood latch broken on my 1978 Dodge Ramcharger and unable to open the hood??


YOU SHOULD HAVE UNDER THE DASH(OR ON DRIVER'S DOOR) A LEVER TO OPEN IT FROM THE INSIDE.

Mar 19, 2014 | 2000 Hyundai Accent

1 Answer

Front Driver side door on2004 Santa fe will not open from inside


Hi Paul, Im glad to help!

Paul, when you can't open a vehicle door from inside the car, it is because either the latch is bad OR the handle is broken OR the rod /cable that goes from the handle to the latch is either off OR broken. Call me Al 314-374-5218 hope this helps and have an awesome day Paul.

Feb 10, 2014 | 2003 Hyundai Tiburon

1 Answer

2000 ford f 150 supercab back door on drivers side will not open


The cable runs from the latch to the handle, it sounds like the cable broke off one end or fell off,

this truck uses cables instead of metal rods to open the latch, remove the door panel and see if the cable fell off handle area or latch,,
the cable operates the inside door handle and sometimes the outside handle but very rare that it operates the out side handle to open door.

Nov 09, 2012 | Ford F150 Cars & Trucks

1 Answer

The interior door handle on the driver's side of my 2000 Tundra does not open the door. The exterior door handle works fine. I would assume the cable has broken on the door latch portion. What is the...


remove the screws that fasten the interior door panel to the door.  Visually inspect the handle assembly. there will be two cables that connect the handle and lock button to the door lock assembly.  I would bet that the L-shaped end of the interior door handle cable broke.  The replacement is self explanatory for the handle. Google the door lock assembly which isn't as visable.  Bob

Jan 10, 2010 | 2000 Toyota Tundra

1 Answer

Could not open driver side manual sliding door in my 2003 Sienna


need to remove inner panel.. be careful not to break panel... ck latch seems broken.. o

Jul 22, 2009 | 2000 Toyota Sienna

1 Answer

My back door won't open on my 2000 tahoe


you latch mechanism could be broken or came apart, common to any vehicle.. open the cover to the back and you will see the locking mechanism, once the rear cover open you can find the latch and open it form the inside. once you get the door open you can play with the door handle by pulling on it like you opening the door and you can observed what actually connect to what to operate the latch. if small rod attached from the door handle to the lock could pop off or broken. may have to replace the handle, depend if its broken or came apart. should be 30 buck for the new handle if needed..hope that help some..good luck

May 30, 2009 | 2000 Chevrolet Tahoe

1 Answer

2000 toyota tundra Door dose not open from inside.


Hi it could be as simple as the the bar coming from the interior handle to the door latch has come off or broken, Remove the the door card and check all is hooked up as it should be, Hope this helps

Dec 10, 2008 | 2000 Toyota Tundra

1 Answer

DOOR WON'T OPEN FROM INSIDE OF NISSAN ALTIMA 2002 ON DRIVER'S SIDE


There is a cable that attaches to the inside door latch release handle. The plastic that retains this cable is most likely broken. I have seen this before. If the retainer is not holding the cable sheath correctly, the entire cable moves when the handle is pulled and does not release the door latch.

Remove the door panel and inspect this cable. You will see 2 cables (one is for the door lock). If the plastic is broken, you will need a new interior handle assembly.

Hope this is helpful!!



Nissan Scope Technician- 10+ years experience in Nissan dealership

Nov 09, 2008 | 2002 Nissan Altima

5 Answers

2000 Toyota Sienna tailgate door will not open/broken handle


I hope I can help, I had the same problem on my 2001. I called the dealership and they said 375.00 + parts to fix. Being mechanically inclined I decidet to try it myself. Please understand, this is not exact, but is a pretty good guide. To open from the outside, make sure doors are unlocked(mine relocked after a minute or so) place a screwdriver, long and thin, into the slot that the handle passes through the door on the right side. Raise the handle of the driver, and you should be pressing down on a cable that operates the latch. the door should release. If you cant do that, from the inside, remove the two side trim pieces. Then remove the inner door panel, One screw under plastic cap on handle, one under cap on strap... and pop off all plastic buttons(hidden) between the door and cover, a 1" putty knife will work for this. You will see the cable that used to connect to the handle. Remove the cable by pulling it through the slot(apparent when you get to it) and now remove the two screws that hold the handle on. Also, you have to remove a screw from the passengers side of the cover plate over the handle. the plate will slide(not sure which way now), and it will come off. replace the handle and etc..... inreverse.. Took me 25 minutes, start to finish. Further questions, let me know. remember, mine was 2001 Sienna.

Jun 25, 2008 | 2000 Toyota Sienna

Not finding what you are looking for?
2000 Toyota Tundra Logo

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...