Question about 2000 Dodge Dakota Quad Cab
Here's a link to a site that should help. Just scroll down the left side under PART NUMBER for your engine and click belt routing diagram. The second one is enter in a different make and year.
Hope this helps.
Posted on Sep 12, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I do have one but I have to send it to an email address, I don't know how to put diagrams on here. shoot me an email to send the diagram to. thanks Lee
Posted on Jun 13, 2008
On the 1999 Dakota with the 3.9liter, the fan shroud absolutely DOES NOT have to be removed. Very simple job. Simply use a breaker bar with a 15mm socket on the belt tesioner pulley nut. Using the breaker bar push (as though tightening) the pulley nut...the reaction will be that the tensioner removes tension from the pulley and the entire belt can be removed by easily slipping it toward the front of the vehicle...comes right off. The new belt can go back on in exactly the same manner. By the way the belt routing diagram IS CONVIENENTLY LOCATED between the hood latch and the radiator mounting for simple and quick refernce...one person job, I did removal and installation four times in less than 10 minutes. (why four times? The auto parts store was selling replacement belts that were too long and did not allow the belt tensioner to provide suffiecient tension...I had to try four different manufacturers before the tensioner was adequately tight with room to grow as the belt naturally stretches from use.). I found no stringing around the fan is required because of the way the belt is routed (it doglegs around the main engine pulley which is centered below the fanhousing and then the belt runs from there to the left side of the fan housing...avoiding the fan/fanhousing all-together (sure you can try to go past the fan/fan housing if you so desire...but you dont have to...and besides the space between the pulleys and the fan is ample to allow the belt to pass between with minimal interference or a simple rotation of the fan as you attempt this method. One hint that made my installs easy as pie...the last pulley you put it over should not be a bezeled and ridged pulley or you will needlessly make life difficult for yourself...the last pulley should be the water pump pulley which is a smooth bore and non-ridged pulley (makes you wonder how the belt even stays on it!)...making it easy as pie to slip it right over...as your last act of defiance to that mean old serpentine belt!
Posted on Jan 17, 2009
HI. i have posted the diagram requested below.
Posted on Aug 24, 2009
Testimonial: "This was exactly what we needed, Thank you so very much. "
Tips for a great answer:
Jul 29, 2015 | 1996 Dodge Dakota
Sep 05, 2012 | 2000 Dodge Dakota Quad Cab
Jul 08, 2012 | Cars & Trucks
May 08, 2010 | 1997 Dodge Dakota
Apr 13, 2010 | 1988 Dodge Dakota
Sep 08, 2009 | 1989 Dodge Dakota 2WD
Jan 08, 2009 | 1992 Dodge Dakota
Dec 01, 2008 | 1995 Dodge Dakota
410 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: