Question about 1994 Chrysler Concorde

1 Answer

I have a 94 concorde,when i hit a bump the abs light wil flash than the power window lights in the switches go out and the windows are dead,the circuit breaker gets to hot to touch,when it cools all is well again. also do you have a wireing diagram ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

I do not have a wiring diagram i am merely a member of fix ya .com .however you may obtain one from even the local library you most definitely have an issue in the wiring i would suggest looking for an open circuit wire maby from rubbing against the body of the vehicle or having got burnt from the engine somehow causing this to occur starting point would be from the {ABS} and follow them up to the fuse panel for this to start with replacement of the wire is required if this is the cause and then securing it away from future occurance

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service engine, abs, trac off


The service engine light does not affect the abs.You most likely have a broken wire in your abs system which is affected by suspension movement.A code reader which does abs codes will tell you which wheel circuit is turning on the abs light.When there is no abs available the track will turn off.

Jul 03, 2017 | 2000 Pontiac Grand Am GT

1 Answer

Car runs but no heat no power windows and the abs light is on any ideas?


A bad ignition switch can cause this. Check for power at fuses F21 (20 Amp), F20 (10 Amp), F23 (10 Amp), and circuit breaker C1 (25 Amp) in the junction block with the ignition switch in the ON position. If these fuses and circuit breaker do not have any power with the ignition switch on, then the ignition switch is most likely defective. If this is the case, there also may be damage to the BLACK/ORANGE wire coming out f the ignition switch. Check this over for heat damage. You may have to replace the ignition switch connector.

Apr 24, 2011 | 1994 Chrysler Concorde

1 Answer

Need fuse box diagram for 94 ford explorer


Hello,
Here is a diagram/picture with a description -
ironfist109_28.jpg

1 15Aamp Dome lights - Power mirror 2 door -Radio Memory
2 6Aamp C.B. Front washer/Wiper
3 No Use
4 15Amp Stoplamps 4 Way flashers
5 15Amp Back up lamps DRL - Canadian - Rear defroster Turn signals, Turn indicators
6 10Amp Speed Control
7 15Amp Cluster warning lamps
8 20Amp Horns
9 10Amp Air conditioner switches Clutch coil
10 15Amp Parking/Licence plate lights Trailer tow
11 15Amp Radio - switched - power
12 20Amp C.B. Cigarette lighter Flash to pass
13 10Amp Instrument panel illumination
14 30Amp C.B. Power windows
15 10Amp ABS module
16 20Amp Premium radio amplifier
17 15Amp Rear wiper/washer
18 15Amp Heated exaust gas oxygen - HEGO
Regards, Tony

Apr 13, 2011 | Ford Explorer Cars & Trucks

1 Answer

94 grand cherokee fuse panel fuse id,,,need to know each fuse function, location in panel and amp


............1994 Jeep Grand Cherokee
......(Fuse Block - Passenger side of Dash)
.....1........5........9........13........17........21........25
..20 A...15 A...20 A....20 A....7.5 A.....15 A....30 A
.
.....2........6.......10.......14........18........22........26
..15 A...15 A...10 A....20 A.... 15 A.....15 A....30 A
.
.....3........7.......11.......15........19........23........27
..20 A...15 A...15 A.....3 A......15 A....15 A.....10 A
.
.....4........8.......12.......16........20........24........28
..15 A...15 A...15 A....20 A.....10 A....7.5 A....30 A
1)Trailer Tow Relay
2)Brake Lamps
3)Hazard Lamps
4)Security Lamp
5)Interior Lighting
6)Security Alarm Module
7)Security Alarm Relay, Security Alarm Module, Flash-to-Pass
8)Overhead Console, Keyless Entry, Radio Memory/Clock
Memory/Chime Module, Power Locks, Power Mirrors,
HEVAC and VIC
9)Rear Wiper
10)Radio
11)Cigar Lighter
12)Parking Lamps, Automatic Headlamps
13)Horn Relay
14)Power Lock Relays
15)ABS Module and Relay
16)Turn Signals
17)Heating and Air Conditioning Module
18)Airbag Module
19)Interior Mirror, Auto Headlamps, Overhead Console,
VIC/GDM Module, Heated Rear Window Relay Coil,
Illuminated Entry Relay and Chime Module
20)Heated Rear Window Switch, Overdrive Switch, Speed Control
21)Security Alarm Module, Lamp Outage Module
22)Airbag Module, Speedometer, Tachometer, Telltales and
Gauges
23)Heated Mirror Feed, Heated Rear Window Switch
24)Instrument Panel Illumination
25)Power Seats
26)Power Windows, Power Sunroof
27)Security Alarm Module and Front Wiper
28)Heated Rear Window Relay

Aug 19, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Power windows turn signal and ac/heat wont work


Had the identical same problems on our Chrysler Concorde. We checked all fuses and relays nothing. Then we checked the wiring on the ignition switch mounted under the steering column it was loose. Repositioned it and everything worked perfectly again. Did not cost a thing. Hope this helps!

Sep 26, 2009 | 1994 Chrysler New Yorker

1 Answer

99 Chrysler Concorde electrical problem


probably a relay. relays control switching of power from one compound circuit to another. because you have multiple circuits that are not working, this sounds likely. get a wiring schematic and find out which relay controls that system, then try replacing it.

Jun 18, 2009 | 1999 Chrysler Concorde

2 Answers

2002 concord abs-brake airbag light stay on untill bang steering


sounds like you have a faulty ignition switch..have seen this before

May 26, 2009 | 2002 Chrysler Concorde

1 Answer

Car alarm preventing car from starting


1999 CONCORDE: check the battery terminals probably they are not tight enough...something like that happened to me just the lights turned on and the car seemed to be dead, the battery is still ok since then. I just needed to buy new terminals.

Sep 20, 2008 | 1999 Chrysler Concorde

Not finding what you are looking for?
1994 Chrysler Concorde Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...