Question about 2003 Ford Crown Victoria

1 Answer

Set timing How do you set the timming on a 04 Mazda 6 (2.3)

Posted by on

  • havok1020 Sep 13, 2009

    the engine will turn over but wont start. Can the timing still be fixed with the timiing light?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

If this has coil packs, then timing is set by 02 sensors and camshaft position sensor.

If it has a distributor, then you can use a timing light, point it at crank pulley after connected to #1 plug wire. See how many degrees away from -0- it is. Look at manual to see what yours is supposed to be at. Loosen an adjust distributor to adjust timing.

Go to and register for full free online repair manual.Plus much more!

Posted on Sep 12, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 mazda 626 replacing timming belt need to know where timming mark are and where to turn them ///v-6 dohc


Feb 22, 2011 | 1999 Mazda 626

1 Answer

Can i replace my mazda 6 2.3 v4 for a 3.0 v6

Not unless you have the whole other complete car to swap parts from. starting with the wiring harness.

Apr 22, 2010 | 2004 Mazda 6

1 Answer

How do you set engine timming Mazda drifter 2.5TDI 2002 with pictures

I want kow timing order in mazda drifter petrol engine

Apr 16, 2010 | 2002 Mazda B-Series

1 Answer

04 mazda 6 lean condition

sounds like you have a vacuum leak. It is sucking in extra air from somewhere. possibly the intake manifold gaskets. The extra air coming in fools the computer / o2 sensors to believe it has a lean mixture then it will try to compensate for the lean mixture and add more fuel.

Oct 30, 2009 | 2004 Mazda 6

2 Answers

I have a Mazda 6 04, and both of my keyless remotes are not working , mazda says that it may be the reciever on the car, but for the diagnosis mazda wants to charge me 99.00 . How much will a reciever for...

Take both of your remotes to a parts house and they will check them for free at the battery display. If the remotes are good I would go to Best Buy and see what they suggest, new alarm,ect. I know it will be cheaper than mazda.

Jul 24, 2009 | 2004 Mazda 6

1 Answer

Timing instructions

the timming should be set @ 6BTC you will need a timming light to check it.
You should go buy a manual from your local automotive store befor changing your timming belt
the site below will show you how to make sure you timming marks are right but it will not explain the removel or installation

Feb 25, 2009 | 1988 Mazda B2200

2 Answers

2004 mazda 6 starter

the starter is located on top of the engine, underneath the battery and battery tray. they must be removed to gain access to the starter

Feb 02, 2009 | 2004 Mazda 6

1 Answer

Out of Time

to reset the timeing tou will have to have the vehicle running. you will need to get a timming light. loosen your distributer so you can turn it but DO NOT turn it until your are ready. on the timming light you will have a camp running on one wire and a gun with a light in it. hook the clamp up to your number one spark plug wire. On your vehicle under the hood it should say on a sticker what the timing should be set at EX:
have someone start the car and point the timming light towards the crank. there should be some marking on it that you will be able to see with the timming light. there should be a needle pointing at one of the numbers. after you find what number your vehicle is supposed to be set turn the distributor one way or the other until the needle points to the setting you need. after that hold the distributor in place and tighten it back up. than see what you have from there.

Aug 03, 2008 | 1994 Mazda MX-3

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides