Question about 1999 Chevrolet Silverado 1500

1 Answer

Hi i have a 1999 chevy silverado short bed that i want to take off where are the bolts that hold it on and what size socket do i need to use thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

Don't know the size of socket, but if you look in the bed of the truck, you will see the heads of the bolts(round objects about an inch or so in dia) and this will give you the locatiopn for the bolts. Also don't forget to unhook your fuel fill hoses and all electrical connections! before lifting bed.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front caliper bolt head size of a 2008 Chevy Siverado


it is an allen key that holds the caliper onto the bracket and an 18mm holds the bracket to the hub

Mar 15, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

I am going to replace the fuel pump/sending unit in my 2001 Chevrolet Silverado in couple of days. I am going to go the route of removing the bed instead of dropping the fuel tank. My question is how many...


YOU will need 18mm socket,extension and depending on type of hitch a swivel. there are 8 bolts i believe two at front and two at back(per side) be sure to disconnect light wiring

May 19, 2011 | 2001 Chevrolet Silverado 1500

1 Answer

What size is the fuel tank on a RWD, 6-cyl, automatic, 1999 Chevy Silverado pickup?


Short bed models have 26 gallon capacity and long bed models have 34 gallon capacity.

Sep 09, 2010 | 1999 Chevrolet Silverado 1500

3 Answers

What size of gas tank does a 2000 chev silverado have


SHORT BED TANK SIZE 26 GALLONS LONG BED TANK SIZE 34 GALLONS.

May 15, 2010 | 2000 Chevrolet Silverado

2 Answers

I have a 1989 chevy 1500 5.7, where is the fuel pump on tank?


You "could" remove the bed, or just lift it high enough to work on the tank. There are 6 or 8 bolts depending if it is a short bed or long bed. But you should undo the 2 straps from underneath, the filler tube from the gas cap filler, and lower the tank with a jack. Another problem these trucks have is the wiring connection to the sending unit/fuel pump assembly. GM recommends to replace this harness end when you work on it. (about $12.00 for the harness connection). These sending units/pumps retail about $300-$400, but you can find them on line starting about $120.00.

May 13, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Have a 99 chevy siverado 1500 short bed, v6. need to know the fuse box layout . It doesn't say what fuse is for what!!! yep I'm a chick trin to figure this stuff out. should be on there like most trucks....


Hi, my name is Ben. Here is a diagram of the underhood fuse box. If you also need one for the fuse box at the driver's side of the dash, just let me know. Sorry about the size, this website has a limit. dc293d4.jpg

May 05, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

2000 Chevy Silverado 2500 6.0 litre fuel pump


lifting the truck bed off the frame works best if you dont have a lift..take the fuel neck loose from bed and remove bolts holding bed to frame from the drivers side..loosen the bolts on passenger side..raise the bed on drivers side while watching bumper to bed clearance on passenger side.. you should get enough clearance to remove fuel pump from tank

Dec 26, 2009 | 2000 Chevrolet Silverado

1 Answer

How do u remove the bed from a 2001 chevy?


get under the bed you have 4 to 6 bolts that run on each corner of the bed to frame rails , look thru holes in frame for big bolt heads to remove the bed, easy , hope this helps you ,thanks robert b.

Jun 07, 2009 | 2001 Chevrolet Silverado 1500

2 Answers

What size deep well socket do you use on 1999 chevy blazer?


usually its either 13 mm 14 or 15 mm socket thats all and just make sure you get all of the old gasket off when your taking the old one off or you will have a leak when putting the new 1 on just take a razor blade to it thats al..

Thanks,
Steve

Jan 18, 2009 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...