Question about 2000 Mercury Cougar

Open Question

DRIVER SIDE WINDOW SWITCH ONLY MAKES A CLICKING NOISE AND WILL NOT MOVE WINDOW. ALREADY REPLACE WINDOW MOTOR, NO CHANGE.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1997 Chrysler sebring jxi's rear passenger side window doesn't go up, down, or even make a noise when I hit the switch. Is it the regulator? Also how would I replace it if it is?


Start with the cheapest answer and work your way up.
That would mean checking the switches first. Will it work with the window switch nearest it (rear seat switch)? Will it work from the driver's door master switch? If the answer to both is "no", then it is likely the window motor. You can often replace just the motor or replace the window/regulator as a unit.
I would suggest you seek help for that, if you have no idea how to do and you do not have the service manual for the car. It can be complicated getting the old regulator out and removing the glass.

Mar 13, 2014 | Chrysler Sebring Cars & Trucks

3 Answers

Chrysler Grand Voyager 2000 with a drivers window that sometimes works! and a loud knocking noise thatis intermitent (although loud) coming when the car is moving, just on the right hand side of the c


Well I think the best thing to do is to replace the windows control module, the one in the drivers door, but before that make sure is getting power and ground if not you found the problem.

Dec 31, 2013 | 2000 Chrysler Grand Voyager

1 Answer

How do I fix the power window in my 1997 Ford Thunderbird the passenger side works but the driver side don't work. What do I need to do? I already changed the fuse.


Open the door pannel check the window regulator by pushing the up and down button. If no noise herd replace the motor but before replacing make sure the window is set in the window track properly

Mar 12, 2012 | 1997 Ford Thunderbird LX

1 Answer

Drivers side window not working. I can manually move it up in down with my hand but the power window does not move when the switch is used. All other windows work. Drivers side makes a clicking/grinding...


IF there is a grinding noise then the motor is trying to move, so take out he unit and try to see if the motor works , if so the mechanism is faulty or the motor does not have power in the drive.
can be the driver switching the motor or the motor itself. Replace after testing the transistor drive.

Sep 28, 2010 | 2004 Kia Spectra

1 Answer

2000 Chevy Blazer Power Window


i have same problem with my drivers side window and now as of today,the drivers wiper wont work???????

Nov 16, 2009 | 2000 Chevrolet Blazer

2 Answers

Windo motors wont work


The driver side window switch is the master switch, the power or input to either roll the window up or down goes thru that switch. Double check all the connections on the back of the driver side window switch are good. With a DVOM you can also check to see if 12v are even getting to the master switch in the first place. If you aren't even getting power to the main power window switch you could've blown the power window fuse.

Jul 17, 2009 | 1994 Oldsmobile Silhouette

1 Answer

Drivers side window doesn't work.


This could be caused by a couple of different things. First off, when you depress the switch for the driver side window do you hear any kind of noise at all? If you are hearing a noise but it sounds like it's moving very easy, it could be the gear on the motor or the window is off track. If you are not hearing any noise at all, it may be the motor is out and will need to be replaced. These can be purchased from most auto parts store or your local chevrolet dealer parts department. The switch panel typically is held on by screws coming from underneath. You will most likely need to remove the door panel and unscrew the switch panel from the door panel once the door panel is removed from the door. While you have the panel off, you can look inside the door and make sure the motor is plugged in and also test to see if the motor is coming on when the button is depressed or if it is binded up you can hear that also.

Apr 18, 2009 | 1992 Chevrolet Corvette

1 Answer

1999 Silverado drivers side power window will not go down.


the power window motor is bad if you let it sit for a few minuites after it stops you can push the switch and it will start moving again

Jan 17, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Rear Passenger Window (Drivers Side) will not go down


Hello, To check to see if its the motor or the switch is simple. Turn the ignition switch on and turn off all noise making things, radio etc. Open your door that has the problem and operate the window switch while you have your ear against the door panel. Listen carefully, you should hear a slight click as you operate the switch. Make sure that the child lock is not on. If you hear it click, the window switch is good and the motor is bad. If it doesn't click, the switch is bad.
If the motor clicks but has no movement you will need to replace it. It comes as an assembly with the regulator. You can not buy the motor separately.
You do not need to take to a dealer for repair but whoever does it needs to know these cars.
I hope this helps.
CYA, Gator241

Nov 18, 2008 | 1989 Mercedes-Benz 190

Not finding what you are looking for?
2000 Mercury Cougar Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...