Question about 2006 Ford Fusion

1 Answer

No power when pushing down on accelerator

I have a 2006 Ford Fusion. The battery went dead on it, I had itjumped 2 times before I put a nw battery in it. Now I can start it and it idles great, but everytime I put the gas on nothing happens, no power at all and no increase in power. Seems like the engine is not getting any gas to it. Could I have bumped something to cause this to happen when I put the new battery in, or could I have shorted out some electrical component when I had it jumped.

Posted by on

  • charles zielonka Sep 13, 2009

    Hi Guys, I took the battery out and waited about 25 minutes before putting in another battery. I did that thumb thing and said it didn't work. I disconnected the battery overnite and that did the trick. As I went to the lock 1 position I could hear it resetting everything in the vehicle. Thank you for the help, I appreciate it. You guys are the greatest.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

The car may be in whats called " limp" mode. After the car is cooled off and you have un hooked the battery for about 10 mins , the car should be reset so to speak.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Ford Fusion will not start wiggle wheel flex column in out up down all while working key finally starts what has went bad


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Ford Fusion 2006 2009 WorkSHOP Service repair manual Download

Jul 04, 2016 | 2006 Ford Fusion

1 Answer

My 2006 Ford Fusion has issues. When driving, if you take your foot off the accelerator, it jerks so bad and slows down...I mean JERKS... as it slows down, then when you want to accelerate again, it sticks...


Most likely issue is your accelerator position sensor. Recommed you remove it and test with an ohmmeter. I don't have the pinout, but there are only four pins. Find the two pins that have a change in resistance when the arm is rotated. The resistance should change smoothly as you rotate the arm. If it jumps around, replace it. Cost is about $75.

Jun 09, 2017 | 2006 Ford Fusion

3 Answers

How to overide limp mode in 2006 ford fusion


put the key in the ignition, and turn it so the lights and everything come on, do not start the engine, then pump the brakes 3 times, turn it off, and then start the engine. This worked for my 2008 for fusion. (if the brakes don't work, try the gas 3 times make sure the engine is off and the car is in park)
Best of luck!

Mar 01, 2011 | 2006 Ford Fusion

2 Answers

My battery went dead on my ford fusion 2008 now my radio doesn't work


As with many newr cars, Your radio probably had a security code which is required to reset it after the radio is removed or power was disconnected from it. You probably have the code written somewhere in your new car paperwork. If not, contact your dealer. They can probably guide you through resetting the code.

Nov 03, 2010 | 2006 Ford Fusion

1 Answer

Engine light after dead car


try cleaning the battery terminals first and see what happens

Jun 04, 2010 | 2006 Ford Fusion

2 Answers

I had to replace the battery on my 2006 4 cylinder. After I replaced it and I cranked it it began idling too low. It idles at about 500 and then to 750 when I push on the accelerator. If I push too hard on...


Although there isn't a good excuse in a late model car to lose its ECU settings during a battery replacement, this may be what has happened.
I would give it a few days (or ignition cycles) to allow it to recover and have the ECU scanned (free) at an auto parts chain store, before going to a pro.

May 25, 2010 | 2006 Ford Fusion

1 Answer

Been told the regulator in the driver's door electric window has failed but want to check that this is correct - - live in Dunfermline


I have a 2006 Fusion and the window was not properly working, was told it was the regulator. They replaced it and the problem went away. Later the had to do the same to the driver window. 2 down 2 to go!!

Jul 29, 2008 | 2006 Ford Fusion

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

822 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...