Question about 2007 Ford F-250 Super Duty Lariat

2 Answers

2007 f250 brakes go to the floor and is hard all new brakes changed one caliber bled brakes every thihg looks good

Posted by on

  • lauravince Sep 12, 2009


  • Automotive repair and diagnoses

    does it have disk brakes all the way around or just the front, and rear shoes.?



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

You may still have air in the ,lines.if you want to do it properly you must bleed all four wheels till the brake fluid is clear and free of air. when you complete this task,you should have a nice hi pedal,if not check for leaks.if no leaks,your problem may be the master cylinder. make sure your master is full at all times during the bleeding check the master start the vehicule,press the brake pedal and hold down there should not be any downward travel on the pedal,if there is replace the master.

Posted on Dec 04, 2011

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

If you replaced the rear brake shoes check the e brake adjuster to make sure it is adjusted/ installed properly. also check that the rear wheel cylinder is in proper contact with shoes

Posted on Sep 12, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers

Brake pedal goes nearly to floor front pads, calipers, brake hoses changed, rotors turned Master cylinder changed, brake booster check valve changed rear brakes checked, drums good no ridge, shoe's...

I would go with not bled correctly

The booster should hold up with a hard pedal until
you start the engine, then vacuum causes it to move
down when pressing on the brake

Sep 16, 2011 | Saturn SC Cars & Trucks

3 Answers

Changing front disc brakes on 95 ford f250

Thats how I have done it on 2006 250. No C clamp.

Aug 03, 2010 | 1995 Ford F250

1 Answer

1999 Yukon. My brake pads are good. I replaced the master cylinder, and bled the brakes. My brakes still fade away to the floor. Any suggestions?

if its loosing brake fludid find out were its leaking out,,
its got to be a brake caliber or if not one of them and your happy with the master cylinder then have a realy good look at your brake servow it could be leaking into that

Jun 05, 2010 | 1999 GMC Yukon

2 Answers

Brake pedal goes to floor,replaced front pads rear good,bleed brakes no help

If you have replaced all pads, and see no leaks at any wheel, and have bled your brake system, then most likely your brake master cylinder has failed.

Dec 18, 2009 | 2001 Ford Taurus

3 Answers

I fixed the converter and got new calibers

Some of your narration seems to be backwards but the bottom line is you likelyhave one or both front brake hoses (rubber ones) between the chassis and the calipers and the body, that are internally collapsing and holding your front brakes in the applied position. There is no repair other than to replace the hoses.

Jun 16, 2009 | 1999 Dodge Grand Caravan

1 Answer


The brakes just need to be bled properly which take 2 people or a bleeding pump,Please tell me how you are bleeding the brakes.

May 17, 2009 | 1998 Audi A4

3 Answers

Just replaced master cylinder on 1990 aerostar and bled the brakes, still the pedal goes to floor and i have no brakes

Did you bench bleed the master cyl. before installing it? then when you installed the new master, did you bleed all 4 points? If yes, then check all for points for leaking caliper/s and leaking wheel cylinder/s. If the van has ABS, check the valve body for a bleeder screw and see if air bleeds out of it. If you've checked everything twice and did everything right then your new master cyl. may be defective.

Apr 29, 2009 | 1986 Ford F 250

Not finding what you are looking for?
2007 Ford F-250 Super Duty Lariat Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides