Question about 2000 Acura TL

1 Answer

I put seafoam in a 01 mits diamante(oil) drove fine now has code

Po300 random misfire, had code p0305 cyl 5 misfire and o2 sensor code- now cleared. engine misfires and exhaust smells of raw fuel. i changed cyl 5 plug and wire. dont know what else to do any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 66 Answers

If you have a coil on plug system, or a waste spark system.... swap coils and see if the miss follows the coil.... voila... that'll fix it.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check engine light code p2196,p2197, po300 ,304,305,306,p2 ,Im freeking out.


P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 Cylinder 3 Misfire Detected P0304 Cylinder 4 Misfire Detected P0305 Cylinder 5 Misfire Detected P0306 Cylinder 6 Misfire Detected P0307 Cylinder 7 Misfire Detected P0308 Cylinder 8 Misfire Detected P0309 Cylinder 9 Misfire Detected P0310 Cylinder 10 Misfire Detected P0311 Cylinder 11 Misfire Detected P0312 Cylinder 12 Misfire Detected P0313 Misfire Detected with Low Fuel P0314 Single Cylinder Misfire (Cylinder not Specified) P0315 Crankshaft Position System Variation Not Learned P0316 Misfire Detected On Startup (First 1000 Revolutions)

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com
-----------------------------------------------------------------------
P2195 O2 Sensor Signal Stuck Lean Bank1 Sensor 1 P2196 O2 Sensor Signal Stuck Rich Bank1 Sensor 1 P2197 O2 Sensor Signal Stuck Lean Bank2 Sensor 1 P2198 O2 Sensor Signal Stuck Rich Bank2 Sensor 1

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com http://www.obd-codes.com/p0002

May 07, 2015 | 2006 Ford Taurus SEL

1 Answer

2004 Sorento began with code P0305, cyl #5 misfire. Inspected and replaced plugs, wires, and coil pack on cyl #2. Repair shop told me cyl #5 injector bad so they replaced. Still has misfire.I suggeste


If you had code P0305, I don't know why they would have done anything to the #2 cylinder but if they have already replaced the plugs, wires and injector; here are a few more items to check:
1) Check connections from ECM. Look for any corrosions or bent/broken pins.
2) Check the fuel line pressure
3) Check the engine compression
4) And if the above are good, then you will probably have a defective ECM

Nov 28, 2014 | Cars & Trucks

1 Answer

05 navigator codes po012 intake " A " camshaft position over ******** bank 1 po302 random misfire po302 cyl. 2 misfire po303 cly. 3 misfire po304 cyl. 4 misfire po2195 o2 stuck lean bank 1 sensor 1 po2196...


there is nothing wrong with the timing chain position . Just a series of sensors that have gone outside the set parameters so if you check and change each one you will clear the faults.

Jan 03, 2014 | Lincoln Navigator Cars & Trucks

1 Answer

How to fix 98 cadillac cater error codes


Reset error codes by disconnecting battery for 5 minutes. Start fresh. all codes should be clear now. drive and see if any new codes come on. They are the ones you need to address.

May 15, 2017 | 1998 Cadillac Catera

1 Answer

I have an 2005 ford f250 with the 5.4L. and its showing codes po174, po300, po305, po307 and i alreadt put a new maf in. what should it look at next?


Did you resolve the other codes? p0300 random multiple misfire, p0305 misfire cyl #5, p0307 misfire cyl #7? You could have bad ignition coils or a vacuum leak. Check your coils and check for vacuum leaks at the intake manifold check vacuum hoses. Hope this helps!

May 22, 2011 | 2005 Ford F 250 Super Duty

1 Answer

Missing, running very rough at idle-very low idle. Engine codes P0011, P0022, P0171, P0300, P0305, P0307, P0316, P2198.


the P0011 and P0022 are the camshaft sensors (both sides) are over advanced--common problem on Fords, and is usually a defective VCT solenoid (variable cam timing solenoid)-it will cause your other codes (P0300 random misfire), P0305 (#5 cylinder), P0307 (#7), P0316 (misfire at startup)-P0171 is a lean condition on side 1, where #1 plug is located (look for a vacuum leak, but a faulty VCT could also cause this)-is there any chance the last oil change set this off? The proper viscosity is very important and may have caused these codes.

The P2198 is O2 sensor signal stuck rich bank 2 sensor 1. Has the engine or sensors recently gotten a bath in oil (seafoam?)-this code indicates something of possibly an over zealous maintenance procedure could have damaged maybe the MAP sensor, or more.... Unfortunately, you have a lot of company. At least you didn't crack a piston or hydrolock the engine. Seafoam is pale oil, naptha, and alcohol. With more detail there should be a reason for all those somewhat related codes-post more information.

Jan 26, 2011 | 2004 Ford F150

2 Answers

My 01 chevy blazer will idle rough. it gives me error codes, p0300 and p0135 and p0141. where do i find these problems


Hello your po135 is o2 sensor bank 1 your po141 is O2 sensor bank 1 sensor 2 and your pO300 is random multiple cylinder misfire these problems are your oxygen sensors and engine misfire pO300 is you engine missing o2 sensors are switches in the exhaust system the engine misfires are the engines cylinders missing.

Jan 05, 2011 | 2001 Chevrolet Blazer

2 Answers

OBD system diagnostic trouble codes? what do they mean? P0123 P0138 P0205 P0305 P0300


po123-tps curcuit high---po138-02 sensor high volts bank 1 sensor 2,--po205--injector curcuit open cylinder 5,---po305-- misfire cylinder 5,--po300 random/multible mis fire,

Jun 02, 2010 | 1998 Dodge Caravan

1 Answer

Used seafoam in oil engine misfiring


determine when it misfires, and isolate cylinders. a poormans method is use an infrared temperature gun (one with high range, 700 degrees or more is preferable) and with engine held at rev(say 2500) point at each exhaust port 1 by 1, misfiring holes have colder exhaust than firing holes.
If the misfire is momentary or intermittant, or caused by defective cam or crank sensors, you should see professional help...those problems require more advanced equipment to get the 1st time, unless you dont mind lobbing expensive parts randomly till you get lucky

Sep 12, 2009 | 1999 Mitsubishi Montero Sport

2 Answers

98 camry engine light on w/misfires & system too lean


take sample of your fuel into clear plastic bottle from fuel line
is there any water present?
this can cause these codes and then not go on storing codes for other bank even though that bank will be missfiring also due to water & P0300 Random/Multiple Cylinder Misfire Detected being logged
check all connections to coils/leads & wiring connectors
due to miss fire codes for cyl 1,3,5 all on the same bank
also look and check for air leaks on that bank (hose knocked off or splithose)inlet manifold gasket,brake booster etc...
3 injectors being blocked slightly on same bank posible!!!
check wires and signal

was it running like this b4 tune up & repairs?
this is what codes are
P0170 Fuel Trim Malfunction (Bank 1)
P0300 Random/Multiple Cylinder Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected

the last code is for trans due to misfire/running lean on bank 1 probably a torque problem code
2e5d889.jpg

May 29, 2009 | 1998 Toyota Camry

Not finding what you are looking for?
2000 Acura TL Logo

Related Topics:

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...