Question about 1997 Dodge Intrepid

2 Answers

What is the spark plug gap setting for 3.2 engine--1997

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 386 Answers

.050 gap for your spark plugs by the way it is a
Vehicle: 1997 >> Dodge >> Intrepid >> 3.3 L 201 CID V6

Posted on Sep 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

@boydgreene you are so WRONG maybe u should buy a set and check each plug, none of them match pre-gapped my a$$

Posted on May 01, 2012

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 196 Answers

SOURCE: Spark Plug gap settings.

Look on you're emissions tag under the hood they should be on there.

Posted on Jan 16, 2009

  • 2 Answers

SOURCE: whats the spark plug gap settings for a 200 zx2

If u buy plugs from autozone, or any other parts store, they're all ready pre-gapped. don't mess w/ them, and you'll be fine.

Posted on Apr 26, 2009

waelmet
  • 6 Answers

SOURCE: what are the spark plug settings for a 1.8 zetec engine

you can set the gap by using the new spark plug casing papar thikness.try it and it will work

Posted on May 24, 2009

  • 2 Answers

SOURCE: spark plug gap ford explorer 4.0 6cylinder

Our 2003 Explorer V6 requires:
0.052 - 0.056" plug gap

Posted on Sep 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is spark plug gap


On every vehicle with a 3 litre engine or just yours?

Jan 31, 2016 | 1997 Dodge Grand Caravan

3 Answers

What is the spark plug setting for a 2000 oldsmobile intrigue 6 liter


there should be a decal under the hood somewhere that shows what the plug gap is. it`s usually .045".

Jan 27, 2015 | 2000 Oldsmobile Intrigue

1 Answer

Spark plug gap for 1997 mitsubishi trition 2.4 petrol ute


Spark plug gap does not effect the engine timing so it's not that critical. Thirty 5 (.035) should work just fine.
Otherwise consult a service manual fro your model or call a Mitsubishi service centre

mitsubishi triton service manual
Mitsubishi Triton L200 2006 2013 Workshop Manuals Factory Service Manuals

May 27, 2014 | Mitsubishi Pickup Cars & Trucks

1 Answer

What the gap suppose to be on a spark plug for 1997 plymouth voyager


According with the Voyager Repair Manual, check this information for each engine:

Model: VOYAGER
Year: 1997
Engine: V6 - 3.3L - FI - - GAS
Parts Number: RN14MC5
GAP : .050"


Model: VOYAGER
Year: 1997
Engine: V6 - 3.0L - FI - - GAS
Part Numbere: RN11YC4
GAP : .044" (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Model: VOYAGER
Year: 1997
Engine: L4 - 2.4L - FI - - GAS
Part Number: RC12YC5
GAP : .050" w/DOHC (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Hope this helps (remember to rating this free answer).

Oct 07, 2011 | 1997 Plymouth Voyager

1 Answer

Need do know the spark plugs gap


If you're replacing the spark plugs in your car engine, you'll need to set the gap before reseating the spark plug. The gap is the distance electricity arcs between the ground electrode and center electrode. The gap must be set correctly to ensure maximum performance. Here's how to set the gap of a spark plug.

  1. Remove the spark plug wires. Use a socket wrench to remove the spark plugs from their chambers.
  2. Clean the spark plug if you are not replacing it with a new one. Remove all dirt and debris from the spark plug.
  3. Check the owner's manual for your car (or any appliance with spark plugs) to find out the recommended gap setting.
  4. Use a gap tool to check the gap of the spark plug. Slip the tool between the ground electrode and center electrode. The gap tool should fit snugly at the recommended gap width indicated on the tool.
  5. Push the tool between the electrodes a few times to ensure proper gap. If the gap is too wide, push the ground electrode firmly against a flat surface to narrow the gap and then check again with the gap tool.
  6. Repeat Step 5 as necessary until you reach the correct gap. Reseat the spark plug and reattach the spark plug wires
Good Luck

Dec 10, 2010 | 1997 Pontiac Grand Am

1 Answer

I changed my front 3 spark plugs and a broken wire now and i have very bad rough idle and i could hear clicks? whats going on? should I put the old ones back on? the new ones were bought from...


The spark plugs should be matched up with the old ones to be sure that are the same as the new spark plugs and that the threads are not too long or too short and if the spark plugs were pre-gapped or if they need to be gapped, and the auto part store should have given you that information along with any spark plug gap because some spark plugs you can not set the gap on or they will be damaged. The spark plug gap should also be printed on the emission label out under the hood. Also, the other three spark plugs and wires should be changed to complete the ignition tune-up.

The spark plug gap should be the same amount between all of the spark plugs, and the farther apart that the gap is between the spark plugs the rougher the engine will run and idle, and the closer that you get to the same spark plug gap between the spark plugs the smoother the engine will run and idle.

It is also very important that the spark plugs be connected to the correct terminals on the coil pack or the engine will have a severe mis-fire and it will set a mis-fire DTC (Data Trouble Code) and cause the check engine light to come on.

Here is a firing order diagram to help assist you and let me know if need help with this diagram or if you require any further assistance.




9969fb5.jpg

Sep 21, 2010 | Hyundai Sonata Cars & Trucks

1 Answer

How wide should i gap the spark plugs for a 1997 toyota tercel


The spark plug gap is usually set on the plugs when you get them new. But its best to check them with a guage. The spark plug gap measurement should be located on the sticker under your hood beside the engine size/i.d. or inside your owners manual.

Sep 07, 2009 | 1997 Toyota Tercel

1 Answer

Just replaced spark plugs and filled all fluids...started her up twice..came out this morning..won't start at all..turns over but doesn't catch..replaced fuel pump, same thing


DID YOU SET SPARK PLUG GAP AT.0.033- 0.038 -THIS IS THE 2.0 ENGINE. IF YOU HAVE A 2.5 ENGINE YOUR SPARK PLUG GAP IS 0.039 -0.043.IF ALL IS GOOD REPLACE DISTRIBUTOR CAP + WIRES AND ROTOR.SEE WHEN YOU REPLACE PLUGS ALSO GOOD TO REPLACE CAP AND ROTOR ALSO.

Aug 16, 2009 | 1997 Dodge Avenger

1 Answer

Timing setting for a automatic mazda mx6 92


The non-turbo 2.2 Liter engine?
6 Degrees.
Should be on your Emissions label under the hood.

(Firing Order is 1-3-4-2. Front of the vehicle is Number 1 spark plug. Distributor rotation is -> Counterclockwise. Spark plug gap is .044
44 thousandths of an inch)

Turbo 2.2 Liter engine?
9 Degrees. Emissions label is under hood.

(Firing Order is 1-3-4-2 Front of vehicle is Number 1 spark plug. Distributor rotates ->Counterclockwise. Spark plug gap is .044)

Aug 12, 2009 | 1992 Mazda MX-6

1 Answer

Spark plug gap spec. for 1997 ford ranger/4.0 liter


for the most part it is under the hood of your car where the sticker say engine size try this website to see if they have you car listed its www.autozone.com if not call your local part store and tell them its a 4.0 liter and you need the gap on the spark plugs

Apr 20, 2009 | Ford Ranger Cars & Trucks

Not finding what you are looking for?
1997 Dodge Intrepid Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...