Question about 1998 Mercury Mystique

2 Answers

1998 mercury mystique will not drive in D but will in D(2)please help me

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,068 Answers

That is and straight forward system where you have a linkage from shifter to transmission and if it goes and 2 and not i drive then you may have a selector issue where it is out of adjustment! but for me to tell you i have to know if the car shifts through all the gears? if it does then that is most likely your problem if it doesn't shift properly the you have internal transmission failure and have to take it to the shop! hoper that helps and good luck

Posted on Sep 19, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

Check the transmission level as well but it sounds like a transmission issue

Posted on Sep 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the selector lever lock for gearshift on 1998 mercury mystique?


I have a 99. On my car, there is a small notch in the center console cover on the bottom right, just by the front of the passenger seat. Stick a screwdriver in there and move the point backwards to trip the release.

Jan 20, 2013 | 1998 Mercury Mystique

1 Answer

1998 MERCURY MYSTIQUE MANUAL TRANSMISSION WILL NOT GO INTO TO ANY GEAR?


That happened once in a Datsun pick up I had. A friend took the boot off of the gearshift and found something had come loose and pushed it back into place.

Dec 04, 2012 | 1998 Mercury Mystique

2 Answers

Location oa a speed sensor to a 1998 mercury mystique


The speed sensor for the transaxle should be mounted on the side with a wiring harness attached.

Aug 07, 2012 | 1998 Mercury Mystique

1 Answer

What are the timing marks for a 1998 mercury mystisque 4cy....I need to know how to position them


1998 Mercury Mystique 2.0L MFI DOHC 4cyl

e842492.jpg

align the camshafts and the...

20f3fce.gif

Fig. 5: Alignment marks for timing chain installation-left hand side

3da874c.gif

Fig. 6: Alignment marks for timing chain installation-right hand side

Hope thats help.

Feb 02, 2010 | 1998 Mercury Mystique

2 Answers

Vacuum Box open line?


that is a breathing vent tube like a rain gutter down spout. nothing to worry about

Jan 31, 2010 | 1998 Mercury Mystique

1 Answer

Speed sensor location...lost?!?!


the second if one will be on the engine most likely place will be down by the crank pulley.

Dec 12, 2009 | 1998 Mercury Mystique

1 Answer

Transmission filter change on 1998 Mercury Mystique


it cant be changed unless the transmission is pulled and then taken in half.ver difficult process.

Feb 25, 2009 | 1998 Mercury Mystique

1 Answer

I have a 98 mercury mystique v6, When I try to start,


just a stab in the dark here. maybe starter drive bad, or starter sellinoid, or the worst case teeth gone on one section of flywheel. i would say its either starter drive or starter sellinoid. either case starter has to be removed. hope this helps. OLD SCHOOL.

Jan 10, 2009 | 1998 Mercury Mystique

1 Answer

98' mercury mystique break problem


You most likely have had the Brake master hydraulic cylinder go out, if u don't know cars this is a job for a shop to repair.

Jan 08, 2009 | 1998 Mercury Mystique

Not finding what you are looking for?
1998 Mercury Mystique Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...