Question about 1991 Honda Accord

1 Answer

I NEED TO REPLACE THE STARTER - 1991 Honda Accord

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 631 Answers

I have the step by step procedures for removing and installing your starter. If you send me your email address I will send you all information. outdoorsman592003@gmail.com

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove starter motor on V6


un plug battery find starter un plug the plug for the starter there should two or three nut or bolts hold starter when losing . and bobs ur uncle replace with new starter ;

Jun 21, 2014 | 1999 Volkswagen Passat

1 Answer

I need to replace the starter on a1996 oldsmobile88; how do i do it


You have to go under,Put two stands under on solid metal.There is two bolts holding starter.Disconnect battery.Remove wire from starter,remember which is which.

Mar 14, 2013 | 1996 Oldsmobile 88

1 Answer

Need to replace starter in 1991 Buick Lasabre


Your best bet aside from a mechanic doing it would be to use Google, Google something like "Replace starter in 1991 Lasabre" If lucky one of the many car forums or even a video on You Tube will come up .

Dec 15, 2012 | 1991 Buick LeSabre

1 Answer

Remove starter from 300touring 2006


Instructions
    • Lift the hood and find the battery. Disconnect both battery cables, starting with the negative cable first. You will need an open-ended wrench to loosen the nuts on the cable ends.
    • 2Jack your Chrysler up. Place it on jack stands, placing the stands under the frame. Locate the old starter on the bottom of the engine. Remove the heat shield from around the starter and remove the two wires running to the starter.
    • 3
    • Remove the three bolts holding the starter to the engine. Turn the starter toward the engine and pull the starter out. The starter must be in the right position to get it past the motor mount. Work the starter down and out, then lay it aside. The starter has a core value you will get back when you return it to where you purchased it.
    • 4Work the new starter back up past the motor mount and put the starter in place. Be sure to line up the starter shim and replace all three bolts. You will need a socket and extension and a ratchet to replace the bolts.
    • 5Replace the two wires to the starter. Double check all bolts to ensure they are tight. Replace the heat shield around the starter. Jack up the vehicle and remove the jack stands from under the frame. Let the car down.
    • 6Clean both battery cable ends. Replace them on the battery and tighten with a wrench.

Aug 23, 2012 | 2006 Chrysler 300

1 Answer

Starter motor grinding


This sounds like you will need to remove the starter to be sure...this grinding is usually caused by the spring loaded armature not releasing to retract into the starter after starting...this grinding means the starter is not disengaging from the flywheel...sometimes installing shims to shorten the engagement length works, but on your late model Toyota, this would be unusual...probably will need to replace the starter. Continued driving could cause serious damage to the flywheel, a costly repair...don't wait to repair or replace...the engine and transmission need to be seperated to replace a damaged flywheel. Try the starter first. Hope this helps. You share a famous name with "Harry Morgan" of the MASH TV series:)

Jul 06, 2012 | 2008 Toyota Yaris Sedan

3 Answers

Starter spins but wont engage, could it be a fuse


HUH??? The electrical circuit is working and you think there is a blown fuse?
NO! there is a MECHANICAL problem with your starter like a broken bendix or a chewed-up flywheel. You need to remove your starter motor and inspect the teeth on your flywheel. Look through the starter hole and turn the engine by hand so you can inspect the teeth all the way around. I usually mark the flywheel with a marking pen before I start turning it so I can tell when I have gone all the way around. If the teeth are all in decent condition, replace the starter. If you find any broken/damaged teeth, you need to pull your transmission and replace the flywheel. (AND probably replace the starter anyway.)

Mar 11, 2011 | Suzuki Esteem Cars & Trucks

1 Answer

Need to replace starter


I recommend you get the Haynes repair manual on your vehicle. Start by removing the negative battery terminal, then removing the retaining bolts from the starter followed by removing the wires from the starter. Reverse the process to put the new starter on.

Jul 12, 2010 | 1988 Isuzu Trooper 2 Door

1 Answer

Need to replace the starter..where is it located


It is on the passenger side, under the truck, mounted to the transmission. It's not too bad to replace, except for the top bolt for the starter, it's a bit difficult to get to.

Jun 05, 2010 | 1997 Ford Expedition

1 Answer

Need to replace starter on a 1986 Camaro, but cannot get the old starter past the exhaust pipe.


Removing the starter
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Disconnect all wiring from the starter solenoid. Replace each nut as the connector is removed (as thread sizes differ from connector to connector). Note or tag the wiring positions for installation.
  4. Remove the bracket from the starter and the two mounting bolts. On engines with a solenoid heat shield, remove the front bracket upper bolt and detach the bracket from the starter.
  5. Remove the front bracket bolt or nut. Lower the starter front end first, and then remove the unit from the car.
These are the steps for removing the starter on the Camaro. Did you remove the bracket? Hope this helped and best wishes.

Aug 01, 2009 | 1986 Chevrolet Camaro

1 Answer

Need to replace the starter on the 97 mitsubishi Diamante, how hard is it to remove and replace ?


To replace the starter you need to;
) Note if you have an anti-thief system and now to reset it if the battery is disconnected.
) Note the radio station selections if they are not saved if the battery is disconnected.

Now
) Disconnected the GROUND connector on the battery.
) Disconnect the electrical cable on the battery.
) Remove the 2 bolts holding the starter on. Remove the harder one to reach first.
) Pull the old starter out.
) Insert the new starter.
) Replace the bolt. Insert the easier bolt first.
) Tighten the bolts.
) Replace the electrical cable.
) Reconnect the GROUND connector on the battery.
) Reset any radio, clock or anti-thief systems.
) Return old starter for a core charge refund.

May 25, 2009 | 1997 Mitsubishi Diamante

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...