Question about 2005 Pontiac Grand Am

1 Answer

How do I change the flasher switch - 2005 Pontiac Grand Am

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Pontiac Master
  • 78,254 Answers

I gave u advice to repair the hazard flasher for a ramdom clicking noise, that is incorrect, the root cause of the problem is the multifunction/turn signal switch, there was a recall on the flasher for your car and recommend you have GM do that, but that will not stop the clicking, go to the link I have provided and there u will find full instructions with picture's on how to replace the turn signal switch on the steering column.

Posted on Sep 11, 2009

  • yadayada
    yadayada Sep 11, 2009


    This switch is avil on ebay for a fraction of the dealer cost. just get the GM part number and enter it into the search window of ebay

  • yadayada
    yadayada Sep 11, 2009

    If I have confused you please call me at hokme 925-459-0571, Dennis



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why are my blinkers working i changed the flasher and the switch on steering column i have a1987 nissan v-6 se 4x4 trvuck?

See troubleshooting basic turn signal and flasher problems
Most problems in the turn signal or flasher systems can be reduced to ... Occasionally, problems in the turn signals are traced to the switch in the steering column, which ... One turn signal light on one side doesn't work Check and/or replace bulb. ... Often the filaments have been reversed In systems combining stoplights with ...

where is the flasher(turn signal relay)located ... - CarGurus > Questions > Chevrolet > Cavalier

CarGurusApr 17, 2007 - Emg. flashers work but L/h and R/h signals dont. ... How do I get that cover. off my steering wheel? ... How to change Flasher Fuse 4 answers.

Turn Signal Switch Replacement - YourMechanic

Dec 15, 2015 | Nissan Cars & Trucks

1 Answer

Location of blinker relay

Hi Thomas, I'm glad to help! We change these all the time at the dealership, BUT, we also change the turn signal switch as well, because the problem could be either one of them and they are hard to get too. Below will be a removal procedure and a picture below that showing what it looks like. Hope this helps and have an awesome day Thomas.

The flasher is mounted to the back side of the multi-function switch. To gain access, the upper steering column cover must be removed (Refer to 23 - BODY/INSTRUMENT PANEL/STEERING COLUMN OPENING COVER - REMOVAL). The flasher can be removed by pulling it forward. The flasher is serviced separately from the multi-function switch. The flasher is black in color for ease of identification (COMBINATION FLASHER LOCATION).


Apr 07, 2014 | 2001 Dodge Stratus

1 Answer

Head lights do not come on changed switch fues is new high beems work when u pull back on switch

Do the flashers work?

My '87's headlights would not work for some reason. And I noticed that the flashers did not work, and the flasher button did not flash. Upon replacing the fuses for the flashers, they worked fine.

Jul 05, 2011 | 1988 Volkswagen Cabriolet

1 Answer

Where do i change the flasher

this cars flasher is part of the hazard lights switch so in order to replace the flasher the switch must be replace. the flasher is built into that switch. this is a common problem with these switches, they where on back order from the factory, the dealer is the only place you can buy this flasher, good luck, hope this helps.

Oct 19, 2010 | 2000 Chevrolet Venture

1 Answer

No brake lights or emergency flashers. Changed

Try adjusting the brake light switch on the brake pedal.

The flashers have a relay in the circuit, test it and see what you get . The flasher switch may be the culprit also. By pass the switch with a pair of jumper wires and see if flashers work.

Apr 24, 2010 | 1991 Jeep Cherokee Briarwood

1 Answer

How do i change the turn signal flasher on a 99 VW Passat and where is it located?

The flasher is part of the emergency flasher switch on the center dash board. You carefully have to pry out the switch, its just clipped in. It is quite long. I pulled out one of the blanks first so I could get behind and put the unit out. The whole switch/flasher needs to be replaced!

Dec 30, 2009 | 1999 Volkswagen Passat

1 Answer

No brake/hazard lights,have running/turn signal lights

Suggest you change hazard flasher 'can' first, then go to the hazard switch. I'm betting it's the flasher can.

May 11, 2009 | GMC Sierra 2500 Cars & Trucks

1 Answer

1995 Mitsubishi Eclipse flasher

Start by checking the fuses then move to the light bulbs. If those are ok check the flasher switch and then the turn signal switch. More than likely you will need to replace the flasher switch.

Sep 26, 2008 | 1995 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

78238 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides