Question about 2005 Cadillac CTS

1 Answer

The drive window is not operating, does it has a fuse?

The front driver window just stop working. When I press the button I can hear a click, but nothing else; all the other windows are working. Should I be looking for a fuse and where is it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 88 Answers

If you are hearing a click, it is probably not a fuse, if the sound of the click is coming from inside the door. Sometimes, the wire spool will get jammed/twisted/unaligned, and will stop moving. To test this, you would need to take the interior panel of the door off, depending on the make/model of the car, this could be easy or not. Once that is off, you will be able to see most of the window mechanisms and wiring to determine the problem.

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 expedition driver window fuse or relay


If you hear the relay, you need to pull the door panel and check power at the motor. Power there replace it. No power, the wires tend to break in the rubber boot at the front of the door jam.

Sep 18, 2016 | 1998 Ford Expedition

1 Answer

2007 mazda 6 front and rear driver and rear passenger windows not working.


The windows need to be re-learned.
- Park the car on level floor. Shift the gear lever to P or N. Pull up the hand brake. Start the engine.
- Sit on driver's seat. Lower the driver side window. Keep the button pressed for three to four Seconds after the window glass sits completely.
- Move up the window glass and do the same as above.
- Do the same with passenger side window glass while sitting on the passenger seat.
- Repeat the same procedure for rear windows one by one from their own buttons.
- Sit on a drivers seat and operate all the windows one by one.
Note:
If the problem persists, pull up the body diagnostic error codes with Diagnostic computer or re-learn the windows with the same machine.

Mar 07, 2014 | 2007 Mazda 6

1 Answer

2003 cadilac deville driver window off track. motor seems to work but window will not go up.


Window regulator is bad in the drivers door . Do you know what a regulator is ? The Trainer 24 Power Window Troubleshooting Do you know anything about automotive electrical testing ? How to read an use a wiring diagram ? Do you know there are two side to a electrical circuit ? B+ voltage an a ground side . Plus there is electronic control modules and class 2 serial data network involved . When you push the switch for a window othen then drivers window on the drivers door . a class 2 message is sent to the other doors modules . The correct module will then open it's window .
http://www.bbbind.com/free_tsb.html Check out free wiring diagram here .Enter vehicle info . year , make , model and engine size. Under system click on body & accessories , subsystem click power windows . Click search button , then click each link one at a time .

Mar 27, 2017 | 2003 Cadillac Deville

1 Answer

2000 Ford Windstar front windows stopped operating, all fuses checked


I suggested you use some OBD2 scanner to have a detect. Very easy to use and very useful.

Jul 23, 2012 | 2001 Ford Windstar

1 Answer

Drivers window stopped working, i hear a click when pressing button ,could it be a fuse ?


there would be no clicking of it were a fuse. you have a bad window regulator. it is an electric motor and it is allowed to wear out with age, like all electric motors, and the gear teeth wear out and strip too. 10 years is the best you can expect, especially from the most used window. buy a new regulator, and have it installed.

Oct 28, 2010 | 1999 BMW 323 Series

4 Answers

My driver side window on my 1998 Ford Expedition will not go up, but I hear a clicking noise when I press the button. What could this be?


The gears on the window lift motor have stripped out, and the motor and/or gears will need replaced.

Aug 08, 2010 | 1998 Ford Expedition

1 Answer

2003 honda accord Power window


have the window regulator checked. If you are hearing clicking from both sides, your regulators are worn/damaged. Hopefully this helps

Jul 23, 2009 | 2003 Honda Accord

1 Answer

Power window failure on 2002 Pontiac Grand Prix GT


Most likely the window motor brushes are sticking, but in any case the door panel must be removed to service the motor

Nov 21, 2008 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2005 Cadillac CTS Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...