Question about 1996 Mercury Grand Marquis

1 Answer

I have a 96 grand marquis. The back window will not role up. I have taken off the door panel already. Can some one tell me how to take off the metal frame of the door to get right next to the actual window? thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mercury Master
  • 75,222 Answers

That does not come off, you most likely need a new window motor, to replace that drill out the three dimples in the door skin in front of the window motor and then remove 8mm machine screws that fasten the motor to the window regulator.

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

1997 mercury grand Marquis driverside rear window motor works but window won't go up. Inner door panel off. Metal cable with a black foam cover and pink plastic clip off. Can't figure what it fits to.


usually this means you need a new window regulator.

Section 01-11: Glass, Frames and Mechanisms 1997 Crown Victoria, Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION Window Regulator, Power Front Door
Removal
  1. If front door window glass (21410) is in the down position and is inoperable, the following steps must be taken; if front door window glass is operational, go to Step 2.
    1. Remove front door trim panel (23942) and front door trim shield (237A04). Refer to Section 01-05 .
    2. Disconnect battery ground cable (14301). Refer to Section 14-01 .
    3. Disconnect window regulator electric drive harness connector.
    4. sva~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Be careful not to strike or scratch front door window glass because it can break.
      Remove window regulator electric drive retaining screws through holes.
    5. Remove window regulator electric drive (23394) from front door power window regulator.
    6. Raise front door window glass to full up position by hand and secure with tape.
    7. Go to Step 5.

  2. Remove front door trim panel and front door trim shield. Refer to Section 01-05 .
  3. Remove front door window glass as described.
  4. Disconnect window regulator electric drive harness connector.
  5. NOTE: Use care not to enlarge sheet metal holes in the door inner panel.

    Remove two 1/4-inch rivets retaining lower bracket of front door power window regulator to inner panel. Use drift punch to knock out center pins for each rivet. Using a 1/4-inch diameter drill, drill out remainder of rivet.
  6. Remove three window regulator electric drive retaining screws from inside door to remove window regulator electric drive from front door power window regulator.
  7. Remove two window regulator retaining nuts.
  8. Remove front door power window regulator from front door (20124).
Installation
  1. Lubricate regulator mechanism with Teflon® Lubricant E7FZ-19590-A or equivalent meeting Ford specification ESB-M1C111-A.
  1. Install front door power window regulator minus motor (23208) into access hole in inner panel.
  1. Position front door power window regulator using upper studs and tabs on window regulator electric drive mounting bracket.
  1. Install rivets retaining front door power window regulator to door inner panel (1/4-20 x 1/2 inch screw and 1/4-20 nut and washer assemblies or equivalent metric fasteners may be used).
  1. Install two upper front door power window regulator retaining nuts.
  1. Install window regulator electric drive with three screws. Do not overtighten screws.
  1. Connect the window regulator electric drive harness connector.
  1. Install front door window glass.
  1. Adjust front door window glass as described.
  1. Install front door trim shield and front door trim panel. Refer to Section 01-05 snorkelbobby_38.gif

Feb 14, 2011 | 1997 Mercury Grand Marquis

1 Answer

How do you change window regulator with window motor on a mercury grand marquis 98


You have to remove door trim panel for access. I can load steps on Monday, but go to ebay and type in grand marquis window regulator in ebay motors and look at pictures of regulators for sale to see what they look like.

Are you sure you just don't need motor? There are 3 dimples in inner door panel to drill 3/8" holes to remove motor bolts.

Dec 11, 2010 | 1998 Mercury Grand Marquis

1 Answer

Electric window assembly removal


assume you mean window motor.

remove trim panel. long screws (2) AT ARM REST. dRILL 3/8 INCH HOLES (3) AT THE DIMPLES in the inner panel, for access to the 3 bolts holding the motor in.
from 1994 manual.

Removal
  1. If front door window glass (21410) is in the down position and is inoperable, the following steps must be taken; if front door window glass is operational, proceed to Step 2.
    1. Remove front door trim panel (23942) and front door trim shield (237A04). Refer to Section 01-05 .
    1. Mark inner door panel and drill three holes 12.7mm (0.5 inch) as shown.

56b2b8c.gif

Oct 28, 2010 | 1992 Mercury Grand Marquis

1 Answer

Power window doesn't work on driver's door


the most common cause of this is the window motor inside the door is defective, pull the door panel and replace the lift motor in the bottom of the door, you will need to drill out the three dimples in the sheet metal over the motor to access the bolts that hold the motor to the window regulator

Sep 28, 2010 | 2003 Mercury Grand Marquis

1 Answer

How to install a new power window motor in my 1993 Mercury Grand Marquis? I have a 1993 Mercury Grand Marquis Ls and the power window doesn't work. So then I bought some new window motors and I was...


Remove all screws to door panel. Remove the lock and window controls. Then take large flat-tip screwdriver and gently pry directly next to plastic studs holding panel on to door. Lift door panel off. Remove plastic out of the way. You will now have access to window motor. You may have to solder off old wiring. Or if you have enough to cut, would be good

Sep 11, 2009 | 1993 Mercury Grand Marquis

1 Answer

Driver's side door panel


They have clips that you can pull them in and out, so try to pull the door panal out slowly and see what happen then ok, get back to me ok.

Jan 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

How do I remove the inside door panel on drivers side


you need to take out the door panal and work from the inside of the panal. Open it from there.

Jan 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

96 Mercury Grand Marquis front Grille


FRONT BUMPER MIGHT HOLD IT IN I THINK THE GRILL HAS A LIP PUSH THE GRILL IN THATS WHAT THE SPRING IS FOR.OH AND MAKE SURE ALL BOLTS ARE OFF ON THE BACK SIDE.

Jan 02, 2009 | 1996 Mercury Grand Marquis

2 Answers

Remove front door panel on 1995 merc grand marquis


http://www.autoclinix.com/Mercury/Front%20Speakers2.htm

Dec 27, 2008 | 1995 Mercury Grand Marquis

Not finding what you are looking for?
1996 Mercury Grand Marquis Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...