Question about 2007 Jaguar XJR Sedan

1 Answer

I have Jaguar XJR 2001. How do I replace Blower Motors Left and Right side? ( Noise bearing )

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jaguar Expert
  • 489 Answers

Driver side :
1- Remove upper steering column 2- Remove driver stowage compartment 3- Remove driver's footwell duct 4- Remove cable tie 5- Remove duct connecting blower assemble to heater/cooler unit 6- Disconnect harness connector from blower assembly 7- Remove blower assembly.
Install in reverse order. Tighten nuts to 5-7 Nm
Passenger side :
1- Remove Instrument panel 2- Remove passenger footwell duct 3- Disconnect harness connector from blower assembly 4- Remove festeners securing duct to heater/cooler unit 5- Remove duct connecting connecting blower to heater/cooler unit 6- Remove blower assembly
Install in reverse order. Tighten nuts to 5-7 Nm

Posted on Sep 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I cange fuse for my cigeratte lighter in my xj8 2001 jaguar and where is box located


In the trunk (aka Luggage Compartment in England) life the panel to expose the spare tire. Fuse box should be on right side, near bumper. Take off top. Should be fuse 11. 10AMP accessory fuse. Check to confirm with diagram on lid. https://www.jaguarforums.com/forum/attachments/xj-xj8-xjr-x308-27/339d1239001496-cigarette-lighter-fuse-1999-xj8-l-fuse-locations.jpg

2001 jaguar xj fuse box

Apr 18, 2017 | Jaguar Cars & Trucks

2 Answers

Humming noise from front drivers side tire, is it the tie rod? how do I fix?


hello
most of the time when there is a humming noise other then a brake noise you have a wheel bearing bad the best way to tell if it is a wheel bearing making noise is while you are driving down the road and the vehicle is making the noise slightly turn the steering wheel left to right if the noise changes at all replace the wheel bearings gm cars are notorious for wheel bearing
good luck chris

Mar 09, 2011 | 2001 Pontiac Aztek

2 Answers

Does the Jaguar X308 XJ have an air blend door for climate control?


Yeah it does. There are left and right blower motors but both route to one blender. whichs directs the air to either the defrost, floor, panel etc....

Feb 09, 2011 | 2001 Jaguar XJ8

1 Answer

Grinding noise in 2001 cavalier 2.2 engine replaced left front hub noise is still there. how difficult to replace left cv joint?


If you still think the noise is coming from the left side CV joint it would be more advisable to replace the entire axle as an assembly. For the time and effort it takes, you can usually get a rebuilt axle assembly for only a few dollars more than the CV joint and the boot required to repair one. You will need a large axle nut socket (usually 30 - 32mm) to remove the axle nut. The lower ball joint and tie rod will need to be separated along with the brake caliper and rotor, from the spindle. I would recheck the grinding noise before doing it. A lot of wheel bearings are mistakenly diagnosed to the wrong side. If the noise is loudest when turning left, most people would assume the left side wheel bearing is at fault. However if the noise is loudest turning left it indicates the right side wheel bearing is most likely at fault. Due to the weight distribution of the front end, turning left the weight all transfers to the right side, loading that bearing. Make sure thats not the case before tackling an axle.

Feb 06, 2011 | 2001 Chevrolet Cavalier

1 Answer

I own a 2001 Chevy Silverado. The fan motor is making weird noises and only works on high. How do I change out the fan motor in the dash and where is the resistor that has probably blown out due to the...


The blower motor is on the right side of the dash.remove the lower right kick panel,the motor bolts in with three screws.the resistor is located to the left of the blower.check your connector on the resistor as these like to melt.you will need to install a new pigtail if this has happened.

Dec 02, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

2001 jaguar xjr main bearing and rod torque


Replace the damaged spares with the original and get this done at the authourised centre.

Sep 28, 2010 | 2004 Jaguar XJR-Series

3 Answers

My car makes a bad growling noise. Everyone said that it was a front wheel bearing because that tire was worn down really bad on the outside. I replaced the passenger front wheel bearing, and it is still...


WHEEL BEARING USUALLY STARTS MAKING A ROARING TYPE NOISE WHICH USUALLY GETS LOUDER THE FASTER YOU DRIVE, SOMETIMES THEY WILL BE LOOSE , TO CHECK JACK UP THAT WHEEL AND GRAB TOP AND BOTTOM OF TIRE AND SHAKE, IF THERE IS MOVEMENT, TRY TO GET SOMEONE TO ROCK TIRE FOR YPU AND WATCH WHERE AXLE GOES INTO CENTER OF BEARING AND SEE IF AXLE IS MOVING WITH TIRE MOVEMENT AND SPINDLE REMAINS STATIONARY, THEN IT IS BAD BEARING, OR SOMETIMES THERE WILL BE NO MOVEMENT, THEN BLOCK REAR WHEELS AND RUN CAR WITH THAT WHEEL IN AIR AND SEE IF YOU HEAR NOISE, GOOD LUCK.

Mar 20, 2010 | 2001 Chevrolet Cavalier

1 Answer

LOUD NOISE ON TURNS HAD REAR HUB BEARING REPLACED BUT STILL MAKING NOISE


probably have another bad wheel bearing on the other side,,,,gm is bad with wheel bearing,,if you turn left and it gets louder that means your loading the right bearing so the right one would be bad,,,and vise versa for the other direction,,,,

Oct 21, 2009 | 2001 Pontiac Aztek

1 Answer

Jaguar xjr noisy alternator


first..napa will exchange your alternator no charge... your stuck with labor again.....and no.. no internal to external port to lube on most alternators anymore...only place it can be done would be the bearing at the base of the case anyway....your best solution is to use a competent rebuilder rather than off the shelf part.......mainly here..be sure that the alternator is the ReAL issue and not some close (physical) related reciprocating part..(belt ,pulley, a/c, power acc, fan, belt belt etc.... good luck

Jan 03, 2009 | 2004 Jaguar XJR-Series

Not finding what you are looking for?
2007 Jaguar XJR Sedan Logo

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...