Question about 2005 Hyundai Tucson

1 Answer

The low settings don't work on my 95 v6 camaro only the high does

When you turn them on high they work fine but when you turn them on low they dont work

Posted by on

  • silver top May 11, 2010

    i assume you are saying the headlights?? low beams do not work but on main beam ?ok ?? first thing check fuse for low beam ? are the bulbs ok low beam remove each and check? or try a known good one ? if ok then check the low beam relay in fuse box there may/will be a location diagram in underside of fuse/relays cover ? but most certainly in the drivers handbook other than this it leaves the possibility the lights switch low and main beam operating stick is faulty ? but check all above first ?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Go to and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Posted on Sep 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers


Could be a number of things--Suggest you find someone with a scanner that is capable of reading GM specific failure records. That will more than likely give you a place to start.

Jun 28, 2014 | 1995 Chevrolet Camaro

1 Answer

Is there anyway to tell which pushrod goes where for a 95 v6 3.4 camaro?

Not really.Should have been marked when removed.They are all the same.Length and thickness,Dont matter where you replace them at.If you rebuilt the motor then I would just replace them and they dont cost much either.

Dec 31, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

My 3.4 v6 95 camaro has a weak crank, but will start, has been doing this for about 4 weeks. lights turn on, gauges turn on. please help, dont want to be left stranded. i also have a service engine light...

Check your battery connections if they are good then your battery has probably gone bad the loss of power to your computer will cause the check engine light to come on

Oct 20, 2009 | 1995 Chevrolet Camaro

2 Answers

Camaro wont turn over

First, clean your battery cables with a wire brush so you know you have a good connection from your battery. If that doesn't do it, it's most likely your starter or selenoid.

Jul 12, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

Remote key lock stopped working after wal mart put new battery in and now my head lights stopped workin!!!

check fuse for low beam, then possibly both low beam globes. they could have blown.
the key remote may need reprograming into system try put key in ignition in on position then press remote buttons a couple of times then try if no good need to go to dealer to be programed into system again or it needs repairing/replacing.

May 31, 2009 | 1996 Chevrolet Camaro

1 Answer

95 chevy camaro 3.4 v6 fire order problem

pass side 1 3 5 from front to back 1 n front 5 n back drive side 2 4 6 2 n front 6 n back

Jan 12, 2009 | 1995 Chevrolet Camaro

1 Answer

95 Carmaro doesn't start and backfires

My first thought is battery replacement. Cold weather will sink a marginal battery. After jumping it, does it turn over faster, adequitly. If a battery is weak, on a cold morning, spark plugs will not get enough energy to fire. Backfire through the exhaulst can also be caused by too much gas. Make sure the choke is not stuck closed. Hope that helps l

Jan 04, 2009 | 1991 Chevrolet Camaro

Not finding what you are looking for?
2005 Hyundai Tucson Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides