Question about 2002 Lincoln Town Car

1 Answer

2002 lincolntowncar where is the air supension compressor relay switch located,please? all fuses are good, on and off switch good- but no power to air compressor pump. Even reset car by diconnecting battery for 1 hour!!!!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lincoln Master
  • 76,691 Answers

The pump is turned on by a control module.

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air


There is a relay, refer to the owners manual for location in the under hood fuse and relay center.

Sep 06, 2012 | Ford E-350 Cars & Trucks

1 Answer

I have a 02 lincoln ls . the air conditiong is not working . i took it to a local shop they check the compressor, fuses, relays, pressure swithches, all is checcking out good. They jump the compressor...


YOU COULD HAVE OPEN OR SHORT IN THE BLACK YELLOW WIRE GOING TO AC COMPRESSOR CYCLING PRESSURE SWITCH. CHECK FOR A SHORT OR OPEN IN RED YELLOW WIRES AT THE AC PRESSURE CUTOFF SWITCH. USE VOLT METER AND CHECK FOR VOLTAGE AT BOTH SWITCHES. PROBLEM COULD BE IN THE EATC MODULE THAT SEND POWER TO PURPLE WIRE THAT FEEDS THE AC PRESSURE CUTOFF SWITCH AND AC CLUTCH CYCLING PRESSURE SWITCH THEN FEEDS THE AC COMPRESSOR CLUTCH SOLENOID.

Jun 24, 2011 | 2002 Lincoln LS

2 Answers

2002 ford mustang air conditioner stopped working. How do I locate the problem?


FIRST I CHECK ALL FUSES AND RELAY.TO BLOWER MOTOR IF IT STOP BLOWING.AND CHECK FUSE TO HVAC SWITCH CONTROL.AND CHECK FUSE / RELAY TO AC COMPRESSOR.IF FUSE / RELAY GOOD POWER GETTING TO AC COMPRESOR CLUTCH COIL AND LOW PRESSURE SIDE 28 PSI AND HIGH SIDE 200 PSI. CLUTCH COIL IS OPEN.IF REFRIGERANT LEVEL LOW YOU MAY NEED MORE REFRIGERANT.YOU NEED AT LEAST 28 PSI ON LOW SIDE AND 200 - 220 PSI ON HIGH SIDE.IF ALL IS GOOD STILL NO AC PROBLEM COULD BE A FAULTY AC CLUTCH CYCLING PRESSURE SWITCH.

Aug 16, 2010 | 2002 Ford Mustang

3 Answers

Is there a fuse or relay for air suspension for a 1999 expedition


Hello
Since you're looking for fuses and relays, I will assume that the compressor is not working. First check the suspension service shut off
switch located under the right side of the dash. If thats on, go to the fuse block under the left side of the dash and check fuses #4-#5-#20-#2
If they're ok, move to the fuse block under the hood on the left fender and check fuse #109 a large 50amp fuse it's best to use a 12v test light.
If that checks out, check the compressor relay located near the right
headlight assy. there will be 4 wires from the relay, lt blue/pink(hot to fuse #109) lt green/red(grnd to compressor) grey/red pwr to compressor)
drk blue/yell to suspension/steering module located behind ctr of dash.
Before you start these tests turn key to on(should be on for all tests)
use the 12v test light and test for power from grey/red wire at the
compressor + check lt grn/red wire for good ground. If you have pwr+grnd it's most likely a bad compressor. But if no power perform the
above tests. Hope this helps.

Jun 30, 2010 | 1999 Ford Expedition

3 Answers

Have no power to the ac compressor. all fuses and


SOUND LIKE AC COMPRESSOR CLUTCH COIL IS OPEN.ITS GETTING POWER YOU HAVE A OPEN COIL CIRCUIT.

May 27, 2010 | 2002 GMC Yukon Denali

1 Answer

2002 sonata v6,clutch not sngaging on compressor ,can it be fixed?any suggestions?


CHECK COMPRESSOR CLUTCH FUSE AND RELAY.IF BOTH IS GOOD.CHECK TO SEE IF POWER GOING CLUTCH IF YES CLUTCH IS OPEN.NEED REPLACED YOU COULD HAVE OPEN DIODE.IF NO POWER TO CLUTCH AND FUSE AND RELAY GOOD.YOU HAVE A FAULTY CONTROL SWITCH OR.BAD PRESSURE SWITCH

Apr 21, 2010 | Hyundai Motor 2002 Sonata

1 Answer

2002 linncoln towncar where is the air supension compressor relay switch,please.


Air suspension needs compressed air for the control of Air Springs (Air Spring is a cylinder like thing which goes up and down when air is pumped in and out of it). For pumping in and out the air, air compressor needs to be switched ON/OFF. Compressor relay connects and disconnects the compressor motor from the power supply ( battery). ----------------- air ride suspension compressor located under the air filter box . ---------------- the Air compressor clutch relay location
is fitted to the left hand inner wing (when viewed from the the driving seat).
-------------------
the compresser is located on the left hand side of the car under the hood.
once you open the hood remove the air cleaner housing and windshield washer resivor.
there is a panel that you lift up under both of thoese that is where the compresser is located
-------------
  1. The air suspension uses a small, separate air compressor under the driver's side left fenderwell, with air lines running to the air bags. On the top of each air bag is a electrical valve. This is a relief valve that allows air to be exhausted when activated, and which senses the amount of air pressure within the air bag to keep both sides equal. These valves are operated via a leveling sensor that is attached to the body of the car and to the rear axle by a movable arm. When the rear of the car drops due to increased load, the arm is pushed up. When the arm is pushed up, it turns on the air compressor and fills the air bags to level the car. When the load is removed and the arm moves down, indicating that the back of the car has risen, the sensor opens the valve on the air bags and allows air to escape, lowering the car.
  2. If the back of the car is low, indicating that the air suspension is not working, and the air suspension light is on, check the fuse first. If the fuse is all right, check the air suspension switch in the trunk and make sure it is on. This switch is used when the car is in for service. Always turn off the switch before lifting the car, because the sensor will think the car is rising and keep the air bag valves open, ruining the rear air suspension.
  3. Turn the ignition key with the engine off. Listen for the compressor to come on while pushing down on the rear bumper. If it does not come on, test the switch terminals for power, using a circuit tester. If one terminal has power and the other does not, replace the switch. If there is power, turn the switch to the off position, raise the vehicle and place it on jack stands in the rear. Inspect the leveling switch on the axle, making sure it is not bent and is connected. Use an ohmmeter for this test. Pull the electrical connector off the switch. Loosen the arm of the switch from the axle. Test the switch with the ohmmeter by checking across both terminals while slowly moving the arm. There should be no continuity with the arm down. As the arm is raised, there should be continuity. If not, replace the switch. If there was continuity, connect the arm and the electrical connector.
  4. Put a floor jack under the axle and raise the axle to the point where it is just beginning to lift the car off the jack stand. Turn on the ignition. Turn the air suspension switch to the "on" position. Use the circuit tester to check for power at the leveling switch. If there is power, turn the air suspension switch to "off" and lower the car. Access the air compressor in the front, under the hood, and check the electrical connector for power. If there is power, check for a good ground. If both are good, replace the compressor. If the compressor works and the car does not rise in the back, replace the air bags.


Sep 11, 2009 | 2002 Lincoln Town Car

2 Answers

Air condition is not cool


It needs to be recharged at a shop.

Jun 29, 2009 | 2002 Dodge Durango

2 Answers

I need a diagram of the fuse box for a 2002 Lexus ES300, I need to replace the AC Compressor Relay and I don't know where it goes.


Windshield washer solution won't come out. I"ve replaced the pump and the control arm attached to the steering wheel. Please advise runnig out of money and time.

Jun 13, 2009 | 2002 Lexus ES 300

1 Answer

Air suspension not working


on the passenger side inside the wheel well there is a high current relay for the air compressor it is a silver metal relay assy 4 wire plug two smaller wire are the relay power two larger wires are compressor feed. if you jump the two larger wires and the compressor works check the smaller wires for power and ground if ok the relay is bad. usually these relays go bad due to compressor drawing high current and usually need to be replaced

Nov 26, 2008 | 1998 Ford Expedition

Not finding what you are looking for?
2002 Lincoln Town Car Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...