Question about 2001 Nissan Frontier Crew Cab

1 Answer

Adjusting 2001 nissan frontier headlights

How do I go about adjusting my 2001 nissan frontier headlights

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

If you have one adjustment screw, it will control your vertical aim. If you have two adjustment screws, one will control your vertical aim and the other will control your horizontal aim

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

199 Nissan Frontier xe headlights work but when the high beam switch is pushed forward the headlights go off


Maybe its to much for the circuit to handle so the automatic circuit protection(ACP) kicks in and shuts it off.

Sep 13, 2013 | 2002 Nissan Frontier Crew Cab

1 Answer

Nissan frontier 2001 has spark and fuel cranks but will not start.


my truck won't start but .. no click just a little kinda grind and then stop .. is it the starter ?

May 10, 2010 | 2001 Nissan Frontier Crew Cab

1 Answer

2004 Frontier with Both headlights out. Brights


ck fuses. ck both bulbs. I know its crazy but I have had both bulbs low beam out. if the bulbs are good then the combination switch may be bad.

Sep 19, 2009 | 2004 Nissan Frontier

2 Answers

How to set the clock on a 2001 Nissan Frontier


Clock set:

To adjust the clock, press the tune knob for longer than 1.5 seconds. A beep signals entry into the clock adjustment mode and
CL appears in the display. The hours will be blinking. Rotate the tune knob to adjust the hours to the desired level.

Press the tune knob a second time and the minutes will start to blink. Rotate the tune knob to adjust the minutes to the
desired level. After 10 seconds, the radio or CD display will reappear. Once the clock is set to the desired level, press the knob repeatedly until the radio or CD display reappears.

All done!

Jun 24, 2009 | 2001 Nissan Frontier Crew Cab

1 Answer

2001 Nissan Frontier A/C only works on 4


you may need to have the diodes changed in the control panel

Mar 25, 2009 | 2001 Nissan Frontier Crew Cab

1 Answer

Where is the location of the thermostat on a 2001 Nissan Frontier


on the nissian frontiers the thermostat is most likily in the lower radiator hose if you look from under the vehicle you will likily see a round housing with three bolts or nuts just follow the hose up from the rad

Please don't forget to rate!

Mar 19, 2009 | 2001 Nissan Frontier Crew Cab

1 Answer

Nissan Frontier torsion bar replacement


well it depends how you want to adjust it, if you want to lower it, back out the screw on the torsion key a couple of turns. raise, screw it in a couple of turns

May 22, 2008 | 2003 Nissan Frontier Crew Cab

Not finding what you are looking for?
2001 Nissan Frontier Crew Cab Logo

1,183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...