Question about 2005 Chevrolet Colorado

1 Answer

2005 parking brake stuck

2005 colorado parking brake stuck

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

The parking brake cable should be replaced but in the short term try getting under the truck and grabbing the cable casing and move them around to get the seized cable inside the cable casing to release keep working the cable until it releases if this doesn't work replace both cables.

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Hyundai accent gear shift stuck in park after brake failure


Make sure the brake lights are coming on if not the release solenoid that unlocks park gets no power and will not release the shifter from park position. Also check the owner's manual for a possible way to override the solenoid lock.

Jun 24, 2016 | 2005 Hyundai Accent

1 Answer

Why will my 08 chevy colorado not shift out of park?


I answered this earlier. This should help get you home or to a shop. Turn you ign. keg to just before ,on , "no dash lights" do not start it. now shift into neutral and then start the engine and shift into gear. This is only a temp. solution. The "TRANNY< BRAKE LOCK SWITCH" needs replacing and it needs to be done by a pro, with specialty tools

Aug 01, 2014 | 2008 Chevrolet Colorado Crew

1 Answer

My gear shaft is stuck in park


It could be either the brake switch above your brake pedal, or one of 4 fuses feeding that circuit. Consult your user manual or check out the following link: 04 G35 stuck in park G35Driver

May 29, 2014 | 2005 Infiniti G35

2 Answers

What would cause my 2005 colorado to idle really low and if i stop at a stop light or make a sharp turn it dies what could be the cause


Hello, if your check engine light is not on & the Colorado does not have a P0506 error code....
Check every connection on the air intake between the MAF sensor and the throttle body for vacuum leaks...Remove and clean the IAC (idle air control) & the MAF (mass air flow sensor)
Do not use brake cleaner on the MAF sensor, you can purchase MAF sensor cleaner at your local parts store....I hope this helps.

Aug 25, 2011 | 2005 Chevrolet Colorado

1 Answer

My 2005 Colorado RPM's fluctuate on a cold start up, from normal down to 500 Rpm. The truck starts fine, but as soon as I have to push the clutch in and stop, the Rpms will fluctuate about 3x and then it...


eddyblueange_2.jpgthis is an idle valve after 1996 the ecu control the idleing from the engine with this air by pass if this valve is geting bad it can get stuck open or closed or dont working right is an electric selenoid ......... listen for air leaks ....... wen you push the clutch you push the brake too check the brake booster

Dec 28, 2010 | 2005 Chevrolet Colorado

2 Answers

I have a 2005 Chevy Colorado. The right rear passenger tail light will not come on, I have changed bulbs, and I have changed the entire lense assembly.Everytime you put your foot on the brake the right...


I have this exact same issue with my 05 Colorado and its so annyoying (not to mention unsafe)... I thought it was just the blub- becuase in my case my signal is no loger blinking. My break light still works, as does my parking light...

Any thoughts as to why this is happening?

Please HELP!!!

Dec 08, 2009 | 2005 Chevrolet Colorado

1 Answer

Where is the trans override switch in a 2005 dodge magnum


Hi buy saying stuck in parking is that the selector does not come out of parking if so check the brake switch this switch also releases the selector lock good luck

Aug 19, 2009 | 2005 Dodge Magnum

1 Answer

2005 Colorado Rotors


Welcome to fixya

Take the wheel off then remove the caliber (brakes ) and then have to remove the nut and pin from the center of the wheel on then it should slide off easy

when takeing off the brakes wen you remove the caliber make sure u us something to hold the calibers piston in like a C clamp or something of that size

hope this helps you out have a good day


Jul 06, 2008 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2005 Chevrolet Colorado Logo

Related Topics:

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...