Question about 2007 Volkswagen Passat Sedan

1 Answer

How do you change drivers side rear vent glass

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

After working on these cars for 15 years you might want to get a glass company to fix it only due to if you bend or tweek the trim around the glass you will need to replace and it is not fun.

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install quarter window that flips out on 2003 dodge Dakota. 2 door.right side


REMOVAL

(1) Remove quarter trim panel.

(2) Remove the bolts attaching the latch to the cab


side panel.



(3) Remove the nuts attaching the frame/hinge to

the B-pillar.

(4) Remove the glass from the cab.
(5) If necessary, remove the latch from the glass.

INSTALLATION

(1) If removed, install the latch to the glass.

(2) Center the window glass at the opening, insert

the hinge studs in the B-pillar holes, and install the

nuts.

(3) Attach the latch to the rear side panel with the

bolts. Tighten the bolts with the latch in the lock

position and pushing rearward on the latch.

(4) Test the vent window for water leaks.
(5) Install quarter trim panel.

INSTALLATION

(1) If removed, install the latch to the glass.

(2) Center the window glass at the opening, insert

the hinge studs in the B-pillar holes, and install the

nuts.

(3) Attach the latch to the rear side panel with the

bolts. Tighten the bolts with the latch in the lock

position and pushing rearward on the latch.

(4) Test the vent window for water leaks.
(5) Install quarter trim panel.

Oct 02, 2016 | 2003 Dodge Dakota

1 Answer

I got a 2004 range rover someone broke in it breaking the driver side passenger rear door vent window how do I fix it myself


Try eBay they sell things of this nature, or take out the broken
vent window, go to a glass guy and have them cut you a piece. But I think eBay would be the cheapest way to go. Good luck hope this helped.

Feb 18, 2015 | Rover Cars & Trucks

1 Answer

How to take glass out of rear door drivers side?


You have to remove the rubber trim and vent window to be bale to get the door glass out, so you can get the regulator out.
The window is attached to the regulator with two pop rivets that will need to be drilled out. then you have to drill the three rivets that hold the lift motor to the door, drill the two rivets that hold the bottom of the regulator to the door, then you can remove the two 11mm bolts that hold the top to the door. Then you can remove the regulator and lift motor assembly.
Here is a diagram of all the mounting hardware you have to remove to get the regulator out, after you have removed the vent window and rubber seal.


If your car does not have the vent window, then all you have to do to get the glass out is pull the rubber seal around the window out. 17435317-4adb-4cc9-9a5d-653f19be846c.jpg

033b11c6-3d63-4923-9efd-70621793652c.jpg

Sep 11, 2014 | 1997 Lincoln Town Car

1 Answer

Where is evap canister vent valve on 2006 lacrosse


I have an '08 and mine is located on the drivers side in the rear. It's tucked up behind the tire and the bumper. Wear safety glasses. Dirt and debris will fall in your eyes.

Apr 12, 2013 | 2006 Buick LaCrosse

1 Answer

Replacing a rear vent window on a 98 Cavalier


do you mean the quarter light glass ,if so then have to remove the big glass first ,then the rear window runner /channel

Jan 08, 2010 | 1998 Chevrolet Cavalier

1 Answer

2002 Mountaineer. How do you change the light bulb at the bottom of the driver side rear view mirror. Dan


SECTION 501-09: Rear View Mirrors 2002 Explorer/Mountaineer Workshop Manual REMOVAL AND INSTALLATION Exterior Mirror Glass Removal
NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.

NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar.
All mirrors
  1. Position the glass in the full up position.
  1. Locate the notch at the bottom of the exterior mirror glass.
ed6be7c.gif
  1. Release the exterior mirror glass.
    1. Insert a long flat-bladed screwdriver in the notch.
    1. Push the screwdriver into the notch until the glass is released.
Heated mirrors
  1. Position aside the exterior mirror glass.
  1. Disconnect the electrical connectors.
All mirrors
  1. Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation
Heated mirrors
  1. Connect the electrical connectors.
All mirrors
  1. Position the exterior mirror glass on the exterior mirror motor.
  1. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.

Dec 26, 2009 | 2002 Mercury Mountaineer

1 Answer

How get replacement rear vent window into place? its a 1995 maxima passenger side rear vent window.have picked up a new one from salvage and fear if i force it, it may shatter.


The metal glass run between the vent & doorglass has a phillips screw at the top under the door weatherstrip. I usually remove that screw, with the doorglass down & glass run (felt) pulled down at the top just enough to allow the metal part to move as you force the ventglass into place. lube the vent gasket with silicone spray or any good wet lubricant and force the glass in, bottom 1st. If this makes you too anxious, remove the 10 mm attachment that retains the metal glass run at the lower end of the part. To get to it, you will have to remove the door panel. Good luck

Sep 27, 2009 | Nissan Maxima Cars & Trucks

1 Answer

2004 Yukon. driver side air conditioner not working


you need to change drivers side temp door actuator then disconnect battery for 5 seconds and reconnect after changing the part, turn key on for 60 seconds with touching heater control to allow actuator to program and then it will work.

Sep 19, 2009 | 2004 GMC Yukon

1 Answer

99 explorer drivers side mirror vibrates


are you trting to tighten the mirror glass or the mirror where it attaches to the body? I don't think glass is removable in 99. Only can try to press on glass to seat if unseated. not too hard.

  1. Remove the front door trim panel; refer to Section 501-05 .
  2. go to car-part.com for a used mirror. Page with * is cheapest seller.
  1. Remove the speaker.
    1. Remove the screws.
    1. Disconnect the electrical connector.
    1. Remove the speaker.
  1. Remove the outside rear view mirror (17682).
    1. Disconnect the power mirror wiring clips.
    1. Remove the outside rear view mirror nuts.
    1. Remove the outside rear view mirror.
      • Feed the power mirror wiring through the opening in the front door (20124).
------------------------------------------------------
f9d70e9.gif
----------------------------
SECTION 501-09: Rear View Mirrors 2001 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION Exterior Mirror Glass, 2001 model Removal
NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.
NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar.
All mirrors
  1. Position the glass in the full up position.
  1. Locate the notch at the bottom of the exterior mirror glass.
  1. Release the exterior mirror glass.
    1. Insert a long flat-bladed screwdriver in the notch.
    1. Push the screwdriver into the notch until the glass is released.
Heated mirrors
  1. Position aside the exterior mirror glass.
  1. Disconnect the electrical connectors.
All mirrors
  1. Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation
Heated mirrors
  1. Connect the electrical connectors.
All mirrors
  1. Position the exterior mirror glass on the exterior mirror motor.
  1. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.
4d9527f.gif

Apr 12, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
2007 Volkswagen Passat Sedan Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...