Question about 1993 Saturn SL1

1 Answer

Window on drivers side of a 1994 saturn four door manual does not work . the window is not electric

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

Could be stripped gears and a bad regulator.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to everything

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 Saturn Ion. Power windows and drivers side power lock not working


All power windows not working ? Do you know how to do electrical testing with a test light or DVOM - digital volt ohm meter ? How to use a wiring diagram to locate the circuits to be tested ? Videos on youtube The Trainer 24 Power Window Troubleshooting You can find free wiring diagrams at http://www.bbbind.com/free_tsb.html .Pull the door panel to access the window - lock switch , Test power supply and the ground . This is how we diagnose electrical problems

Feb 11, 2017 | Saturn Cars & Trucks

1 Answer

How do I replace the drivers side window on a 1999 saturn s series car (manual)


Remove inner door panel and remove the glass that is left in the window track. Apply glue and place new glass in track and give it plenty of time to dry and set. Then replace inner door panel after all is fine.

Sep 29, 2016 | Saturn Cars & Trucks

1 Answer

I have a 1994 Honda Del Sol and the electric windows quit working. Checked the fuse. How do I get the door panel off the drivers side door without breaking anything?


RTM?
they pop from bottom to top most cars.
practice in a pic-a-part yard, like i did as a kid.
no reason at all to messup good cars, ever. practice.
or RTM. "read the manual, no, really"
manual is free, read he body pages. Interior it goes step by step.
http://hondatech.info/downloads/Auto/Manuals/Civic/

Sep 22, 2013 | 1994 Honda Civic Del Sol

1 Answer

Driver side door will not unlock manually or electric. can feel actuator rod to lock moving but not enough to unlock. Have tried working the lever manually no good. Help


Put the window down & look inside the door
with a small light & hook the necessary linkage
to unlock the door

Then remove the inner door panel & make the repairs

Jun 29, 2011 | 1994 Buick LeSabre

1 Answer

1994 saturn sedan 4dr. Passenger seat belt not working; makes electrical sounds, like a shortage; drains battery, and car won't start; how can i disconnect. where do i disconnect. see a connection...


Are the Seatbelts Manual or Auto, if they are auto then on the Right hand side look back and see the Plastic Molding that Seperates the 2 doors take that off and at the mid or Bottom the Motor will b in there and jst disconnect it for a Temp fix, and if u want to Replace it then u may want to replace to Track for the Seat belt, They some time get wore out

Sep 05, 2010 | 1994 Saturn Sl

2 Answers

Electric windows and electric locks


look for power windows relay.

May 24, 2009 | 2005 Honda Accord

2 Answers

Power window won't operate


Yep! There are two slide pins on the door handle that are very small. They need to be pushed out with a pick type devise. Be careful not to loose them since they will need to go back in the same slot...they can be pushed forward towards the front of the car, or backwards towards the back of the car. Then you will need to take the torx screws out of the inside panel. It might be a # 30 torx wrench...I not exactly sure.

Apr 12, 2009 | 1994 Saturn Sl

1 Answer

Replace a window regulator in a 1994 ford explorer


wow, a lot of work to do.

Window Regulator, Front Door, Explorer Removal
srk~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel and front door trim shield . Refer to Section 01-05B .
  1. Remove inside door belt weatherstrip and glass stabilizer.
  1. Remove front door window glass as described in this section.
  1. Remove two nut and washer assemblies attaching the equalizer bracket.
  1. Remove three rivets (manual) or four rivets (power) attaching the regulator base plate to front door trim panel finish panel (23712) .
  1. Remove window regulator electric drive and front door window channel bracket from vehicle.
  1. Working on a bench, carefully bend tab flat to remove arm slides from front door window channel bracket .
  1. Install new window regulator electric drive arm plastic guides into front door window channel bracket and bend tab back to 90 degrees. Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket . Make sure rubber bumper is installed properly on new front door window channel bracket , if replacement is made.

    4a5a8fb.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Steps 7 and 8 of Window Regulator, Removal.
  1. Install front door trim panel finish panel with preassembled glass bracket into vehicle. Set the regulator base plate to window regulator electric drive using base plate locator tab as a guide.
  1. Install three (manual) or four (power) rivets (385189-S100) to attach regulator to front door trim panel finish panel . Two 1/4-20 x 1-inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (3-5 ft-lb). Equivalent metric retainers may be used.
  1. Install equalizer bracket.
  1. Install inside door belt weatherstrip and glass stabilizer.
  1. Lower regulator arms to access holes in front door trim panel finish panel . Install front door window glass as outlined.
  1. Adjust glass to ensure proper alignment with glass run. Cycle glass for smooth operation.
  1. Install front door trim panel and front door trim shield . Refer to Section 01-05B .

Apr 11, 2009 | 1994 Ford Explorer Limited

1 Answer

Power window failure on drivers side


Sometrimes the wires between the door and the body break from opening and closing the door, check your window motor for paower with a test light, if no power, you have a broken wire, between the door and body

Dec 22, 2008 | 1999 Saturn SL

Not finding what you are looking for?
1993 Saturn SL1 Logo

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...