Question about 2006 Ford Laser

Open Question

Ford laser head bolt torque setting - 2006 Ford Laser

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

the terrier
  • 94 Answers

SOURCE: head bolts torque settings

according to the manual its 22NM or 16lb/ft

Posted on Oct 26, 2008

  • 1 Answer

SOURCE: Angle Torque settings head bolts

Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

Posted on Mar 17, 2009

martin538
  • 117 Answers

SOURCE: need head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in.

Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees

Posted on Apr 13, 2009

kirkx
  • 2019 Answers

SOURCE: whats the torque specs on a 2001 ford focus 2.0

You need to buy the manual, because you also need to know the order in which to torque them.
http://www.car-stuff.com/mmparts/ford-focus/repair_manual.html
usually you start at the middle and circle outward.
But they can differ. Some cars you always need to put in new head bolts. Others are done in several stages. This is too critical to take chances on.
If you really can't afford $19 for a manual, go to the library and xerox the pages.

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cylinder Head bolt torque and tappet settings to suit a , Ford Anglia 1964 105E Engine


Hi valve clearance inlet 0.010 in (0.254 mm). Exhaust 0.017 in (0.432 mm) normal running temperature .. Cylinder head bolts Torque 65 - 70 lb/ft.,.. Cheers

Jan 10, 2017 | Ford Cars & Trucks

1 Answer

What are the head bolt Torque settings for Ford laser 2002 dohc ZL on block. 1.6l


go google and type in torque settings for (your engine)
There will be pages of settings and diagrams as to how to pull it down

Mar 17, 2015 | Ford Cars & Trucks

1 Answer

What to set torque specs for head bolts on 1968 mustang 200. engine?


it is a 3 step torque 1 st is 55 lb then 65 and final is 70-75 lb

Jun 23, 2014 | 1968 Ford Mustang 4.7

1 Answer

Torque settings for head gasket on LDV convoy 400 2,5ltr ford engine


I can tell you one thing for sure these are torque to yield bolts and they must be replaced, you can't use them over or the head gasket will leak very quickly or the bolt will snap on install..

Jul 13, 2012 | Cars & Trucks

1 Answer

WHAT IS THE PROPER HEAD BOLT TORQUE SEQUENCE AND SPECS FOR THE INLINE 6 4.9? FORD


OKAY GET A PIECE OF PAPER I WILL GIVE YOU 2 ROWS OF NUMBERS TO WRITE DOWN. THAT WOULD BE YOUR TORQUE SEQUENCE. OKAY FROM LEFT TO RIGHT WRITE NUMBERS. 11 7 3 2 6 10 14 OK WITH THESE NUMBERS PLACE THEM UNDER FIRST SET OF 7 NUMBERS I GAVE YOU. FROM LEFT TO RIGHT. WRITE NUMBERS 13 9 5 1 4 8 12. NOW THIS IS HEAD BOLTS TORQUE YOU HAVE 3 HEAD BOLTS PASS FIRST PAST TORQUE BOLTS ALL TO 50 - 55 FT LBS FOR SECOND PASS TORQUE ALL BOLTS 60 - 65 THIRD PASS TORQUE ALL BOLTS TO 70 - 85 FT LBS.

Nov 13, 2010 | Ford F-150 Cars & Trucks

1 Answer

What is the right Torque Specification of the cylinder head bolt,main bearing and connecting rod bearing for a 1997 Ford F 150 4.2 liter? Thank you...


Cylinder heat bolt torque:
Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: Torque all bolts in sequence to 14 Ft/Lbs Step 2: Torque all bolts in sequence to 29 Ft/Lbs Step 3: Torque all bolts in sequence to 36 Ft/Lbs Step 4: in the sequence, loosen the cylinder head bolts three turns. Step 5: Tighten short bolt to 15 - 32 Ft/Lbs Step 6: Tighten long bolt to 30 - 36 Ft/Lbs Step 7: Tighten all bolt to 175- 185 degree note: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior on the next bolt in the sequence.
Main bearing torque:
Torque sequence: Step 1: torque bolts to 91 Ft/Lbs with the exception of the rear main bearing cap Step 2: torque rear main bearing cap bolts to 88 Ft/Lbs Step 3: torque brace bolts to 40 Ft/Lbs
Connecting rod torque:
Torque sequence Step 1: Torque to 29 Ft/Lbs Step 2: Turn an additional 90 degrees

May 17, 2010 | 1997 Ford F150 Regular Cab

2 Answers

Head bolt torque spec


Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Aug 16, 2009 | 1999 Ford Escort

1 Answer

Require ford escort rs 2000 1976 torque settings head bolts


2lt overhead cam with them horrible tappet adjusters,cast iron head but valves dont hit the head if the timing belt breaks ,but it does on the 1600 .called a pinto in america .Remember the assembly line well ,have many a fond memory of working on it and the staff canteen on night shift ,what lovely grub we got.Head bolt torque is about 80lbs because i used to pull them down to check them after the machine had tightened them up

Apr 24, 2009 | 1997 Ford Escort

4 Answers

Torque wrench settings


please understand there are a lot of items on a car that require torque settings every thing from the lug nuts to every engine bolt, and transbolt. please be more specific

Jul 03, 2008 | 1999 Ford Taurus

1 Answer

Cars-


please specify what torque you need. The head bolt torgue? The lugnut torque? The motor mount torque. Every bolt has a required torque. Mr. Rodney Long

Jul 02, 2008 | 1995 Ford Contour

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...