Question about 2004 Lexus Lx 470

1 Answer

Removing rear tail light in Lexus lx 470

I was able to remove two screws on rear latch rim. But the taillight unit is caught by something and would not come loose.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

Open the tailgate and then you must unsnap the carpeted part. It's easier with two people as the plastic part that says "Lexus" has to be pulled up out of the way as it will spring back in place if someone is not holding it. Don't be afraid to pull on the carpeted part; it will snap back with ease. When it's off you will see where the lights are. There are three screws you must undo so you can take off the metal cover. Should be pretty easy from there!

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace the rear signal light


The whole light assembly comes out and you can remove the bulb assembly from behind. There will be a couple of screws accessible from the trunk compartment behind the concealment panels.

Apr 07, 2014 | 2001 Ford Taurus

1 Answer

Fuel pump replacement


1. Release the fuel pressure .
2. Remove the rear seat ,rear door scuff plate ,step plate ,rear seat lock cover ,rear carpet and cover plate on floor panel for access to electrical connection for fuel pump .
Disconnect electrical connector from top of fuel pump .

From here you can remove the fuel pump unit .

Jun 18, 2013 | 2003 Lexus LX 470

1 Answer

How to replace right rear taillight assembly


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Apr 01, 2011 | 2002 Lexus RX 300

3 Answers

Tail lights do not work on a 2000 lexus rx 300 bulbs are fine, all other lights work fine


You may have a fried fuse. Look in your owners manual to find out which fuse it is in the fuse box diagram. If that is the problem make sure to use the same amperage fuse to replace the burned one with. I fried fuse is usually a sign that you have a short somewhere. But they can also fry for other reasons such as excess moisture somewhere. Sometimes they just burn from age and fatigue. It may solve it to just replace the fuse, but if there really is a short, the new fuse will fry too.

Dec 29, 2010 | 2000 Lexus RX 300

1 Answer

Left brake light dont work when brake peddel is applied


Replace the bulb,
1. Open the lift gate on the rear of your Blazer or drop it if you have the tail gate that folds down. Locate the screws on the inner edge of the lift gate frame. There are two screws--remove them with a Phillips screwdriver.
2. Slide the taillight assembly out of the rear of the truck, being careful to not break the locating tabs on the rear of the housing. Locate the bulb sockets on the rear of the taillight assembly.
3. Rotate the light bulb socket counterclockwise about a quarter turn to unlock it from the taillight assembly. Pull the socket straight out of the assembly with the bulb attached to it.
4. Remove the bulb from the socket by pulling it straight out of the socket. If you are removing the entire assembly from the truck, remove the remaining sockets from the rear of the taillight assembly, lay them aside and remove the assembly completely.
5. Reinstall everything in revers and don't for get to *** some grease to your socket before you place the new bulb in place and test the operation of the new bulb before you reinstall the tail light.
Thank you for using fixya and here is the bulb you need for the trail light.The 1999 Blazer uses a 3057 bulb available at most auto parts stores.

Apr 29, 2010 | 1999 Chevrolet Blazer

1 Answer

How do you install a parking / blinker light on a 1989 ford f 150


Well Front & Rear Turn Signals And Parking Lights Are In One Bulb to Change The Front One is Open Hood And Reach In Grab The Fixture In turn Sinal Socket And Turn 1/4 Turn Counter Clock Wise and pull it Out but I will Tell you Its Very Tight Area To Get Hands In. The rear is a lot easyier remove the two screws on outside edge of tail light lens and there is two more on inside drop tail gate and look where tailgate latch is there is one at top and one at bottom of taillight from inside the latch area

Oct 28, 2009 | 1989 Ford F 150

1 Answer

How do i change the bulb for my rear tail light?


Open up the trunk and pull back the "carpeting" around the inside of the trunk in the area of the tail light. You may have to remove some tabs and or plastic screws to do this. Once the "carpeting" is pulled back you can get to the three bolts holding the tail light to the body. After removing the screws, gently wiggle the tail light assembly from the body of the car and look for any hooks the may hold the tail light in place. They won't stop you from removing it, but they do hold onto it. They are mostly there for alinment when installing the tail light. The bulbs should be in twist off plugs.

Aug 05, 2009 | 2002 Lexus SC 430

2 Answers

How to Replace the AC filter on my Lexus 01 LX 470


Perform steps 1-3 first to inspect whether you have the access doors or not before ordering filters!!!

Did this little project this evening. Figured I'd write it up.

5 Easy steps:

1. Remove glove box door by removing both screws at the bottom of the door.

2. First pop the the little flap with a fuse/relay out of the black plastic shield in the upper portion of the glove box opening. Next push it back behind the shield through the opening. Next remove the 3 screws holding the shield in place. Don't pull this shield out yet!! Read step 3 first.

3. Gently pull the shield out. Be careful because the glove box light is still plugged into this part. It is located on the right side of the shield. Once it is pulled out slightly, unplug the bulb from the harness and now you can fully remove the part.

4. Now you can see the vertical cover where the air filters reside. The cover is about 5 inches tall and about 1 inch wide. It has 2 tabs on the upper portion of the cover. Squeeze these tabs towards each other and pull the cover off.

5. The filters are now exposed. They are stacked on top of each other. Pull the first filter out then lift the next filter up and pull out. Put new filters back in and reverse the procedure.


Parts needed:
2 Cabin air filters (Toyota PN 88568-60010 if you drop CDan a pm)
1 Phillips screw driver

Time needed:
No more than 15 minutes

STEP BY STEP PHOTO INSTRUCTIONS

5308136.jpg
ce42e62.jpg
75dfbf5.jpg
4d6181d.jpg
c7d7ec9.jpg

Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FERE question.

Mar 19, 2009 | 2001 Lexus LX 470

1 Answer

Replacement of rear outside tail light assembly


If you're asking how do you change a taillight bulb, then follow this procedure:

Open the trunk lid.

Disconnect the connectors from the taillights (taillight bulb connectors are visible by looking inside the trunk at the back of the tail lamps.) There may be an interior trunk trim panel that you have to take off but in most cases its just a series of thumb screws that hold them in.


Brake Lights/Taillights: 21/5 W

Rear Turn Signal Light: 21 W

Back-up Light: 21 W

Rear Side Marker Light: 5 W


Turn the bulb sockets 45 º counterclockwise to remove the bulbs.


If you're removing the taillamps with the bumper off there are 3 nuts and screws that hold the taillight to the rear panel of the car that have to come off from the inside of the trunk.
Remove the nuts and screws, then remove the taillight.

hope that answers your question

Aug 15, 2008 | 2006 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...