Question about 1993 Saab 9000 Hatchback

Open Question

I have problems with the tcs control sistem - 1993 Saab 9000 Hatchback

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does tcs sw off means


Toba, Transmission control switch(tcs sw) or Traction control switch. it's telling you there is a problem in transmission that needs diagnosed.

Mar 10, 2016 | 1998 Ford Windstar

1 Answer

How do i reset my traction control


Is your trac light lit ? If so it has a problem an till it is fixed , you can't reset it. Need to have it checked for DTC'S - diagnostic trouble codes .
If the ABS control module detects a malfunction, it will disable TCS and will command the BCM to turn the TRAC LED Off. The driver can also disable TCS, if desired, by depressing the TRAC switch. When the driver depresses the TRAC switch, the ABS control module will disable TCS and will command the BCM to turn the TRAC LED Off.
DTC C0276 TCM Traction Control Not Allowed
DTC C0275 or C0276
The TCM sends a serial data message to the electronic brake control module (EBCM) indicating that torque reduction is temporarily not allowed.
DTC C0550
DTC C0896
The electronic brake control module (EBCM) is required to operate within a specified range of voltage to function properly. During antilock brake system (ABS) and traction control system (TCS) operation, there are current requirements that will cause the voltage to drop. Because of this, voltage is monitored out of ABS/TCS control to indicate a good charging system condition, and also during ABS/TCS control when voltage may drop significantly. The EBCM also monitors for high voltage conditions which could damage the EBCM.

Oct 16, 2015 | 2004 Saturn VUE

1 Answer

Tcs light on and no speed


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 21, 2012 | Mazda MAZDA6 Cars & Trucks

1 Answer

1990 volvo 740gl far left corner of dashboard has a yellow light thats on constantly. a diagram of a car with a zigzag road. whats that mean.


Either you have a problem with the TCS (Traction Control System), or the TCS is switched off. Most cars with TCS have a button on the shift or the dash labeled "TCS" or "TCS OFF". Find the button, and press it with the car running in gear. If the light goes out, problem solved.
If you cannot manually disengage TCS (no button), or when you press the TCS button the light flashes, check all your brakes and make sure none are dragging or worn out. Also make sure all your tires are properly inflated and balanced, and none are worn out.
TCS works by controlling your brakes on slippery roads and will dynamically apply the brakes to each wheel in order to prevent a skid, even when your foot is not on the brake pedal. During normal driving, the TCS light is out and will either come on briefly or flash when it is active and preventing your car from going into a skid. When the light is on constantly, the system is disabled- either because it was shut off by the driver pressing the TCS (or TCS OFF) button, or because the system has detected a brake problem and automatically disabled it for safety reasons. Worn or dragging brakes, a tire that is flat or worn, or even a wheel that is badly out of balance will cause the system to disable itself, and a severe wheel alignment problem will also.

Apr 15, 2011 | 1990 Volvo 740

4 Answers

Tcs light came on with my 2000 honda odyssey,what does that mean?


TCS = Traction Control System

The TCS light is on because the check engine light is on this is common repair the check engine light failure abd the tcs will go back to normal.

You need to check the code to see if it is a trans code and then if it falls under the bulletin limits Honda will replace the trans under warranty. Even if you are out of warranty Honda will sometimes do a partial warranty. Here's a copy of the Bulletin.

There are several things that will turn the check engine light and tcs light on .if you get the code I can tell you exactly what the problem is . on your year i see transmission problems as well as egr problems. if you go to any large auto parts store they will check the code for free or a very small fee.

Hope helps (remember to rate this answer).


Mar 17, 2011 | 2001 Honda Odyssey

1 Answer

Dtc p1780 is there an easy fix?


CODE P1780 - TRANSMISSION CONTROL SWITCH OUT OF SELF TEST RANGE.POSSIBLE CAUSES TO PROBLEM, TCS CIRCUIT OPEN OR SHORTED IN THE WIRING HARNESS, TCS NOT CYCLED DURING SELF TEST, TCS IS DAMAGED OR THE PCM HAS FAILED.

Mar 02, 2011 | 1999 Ford Explorer

2 Answers

I have ford explorer 2002 ...and the mecaninc said apear code P1780 and P1733 what means


P 1780 = neutral safety switch
P1733= 4C Pressure Switch Sense Circuit
Looks like you have transmission problems

Feb 04, 2011 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

The TCS light came on and the car started jerking especially at stops. The light would go off for a while after restarting the car but the same problems would happen and the light would eventually come...


The TCS stands for Traction Control System, I believe. The TCS is controlled by inputs from the wheel speed sensors. If you have a bad sensor, then a new hub may be required to repair it.

The check engine light may be a sepawrate problem. Have the codes scanned for both the Anti lock braking sytem, TCS, and the check engine light.

Sometimes it will require a separate scanner for the TCS/ABS vs. the Check Engine light.

Good luck on this diagnosis and repair.

Jan 29, 2011 | 1996 Acura TL Series

1 Answer

TCS light on


The TCS (Traction Control System) indicator comes on or flashes under the following conditions:

When you turn the ignition switch
to ON (II).

When you manually turn off the
TCS.

It flashes when the TCS is
regulating wheelspin.

If the system's diagnostics senses
a problem in the TCS, the indicator
will come on and stay on.

If the brakes overheat, the
indicator will come on.

If the TCS indicator comes on and stays on for more than 10 minutes while driving, pull to the side of the road when it is safe and turn off the engine. Reset the system by restarting the engine, and watch the TCS indicator. If the indicator remains on, or comes back on while driving, have the system inspected by your Honda dealer. You can still drive the vehicle without TCS.

This indicator will come on along with the ABS indicator if there is a problem in the anti-lock brake system.
The TCS indicator may occasionally come on for one or two seconds and then go out. This is normal.

Hope this helps you figure it out.

Dec 14, 2009 | 2000 Honda Odyssey

1 Answer

I have a problem


dear friend:please note that the tcs and abs works in conjunction,im not sure what your saying about the tcs(traction control system)plse check your wheel sensors and turn wheels for damage.

Sep 14, 2009 | Cars & Trucks

Not finding what you are looking for?
1993 Saab 9000 Hatchback Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...