Question about 2004 Volvo XC70
IVE REPLACED THE BULBS ALSO THE BRAKE PEDAL SENSOR SWITCH, STILL NO BRAKE LIGHTS. ALL THE FUSES ARE OK BUT STILL NOTHING, THE ONE BRAKE LIGHT THAT DOSE WORK IS THE ONE ON THE BACK SWING UP DOOR ABOVE THE REAR WINDOW. IT DOSE NOT SEEM TO BE GETTING POWER FROM THE REAR FUSE PANEL TO THE BULB RECEPTACLE (BRAKE LIGHT) . PLEASE HELP ME IVE TRACED AND CANT FIND THE BRAKE OF POWER IN THE WIRES , IS THERE ANOTHER FUSE PANEL THAT I AM MISSING.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1991 volvo tail lights
Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?
Posted on Oct 20, 2008
check tranny fluid.if fluid level is correct.change fluid and filter if its been a long while.if it still wont go into gear.your tranny oil pump is worn.and the forward clutch seals and drive plates worn.
Posted on Jun 11, 2009
Replace your brake light switch,also just replace the brake light fuse,sometimes they can have an very small crack in it,they you cant see.
Posted on Jun 22, 2009
In my own personal experience, you should first adjust the nuetral safety switch, it controls the reverse lights. After that, remove the jaw clip from the back of the tail ight, clean the connections, and the take a thin pick, and close the 2 metal pins together in the different sections of the jaw, with enough space between them to plug them back in. The connections inside the clip tend to expand away from the printed tail light curcuit over time.
Posted on Oct 26, 2009
Testimonial: "Hey, thanks for the tip! I will try it! every time I step on the brakes the "bulb out" light goes on & it's driving me nuts! thanks again."
Tips for a great answer:
Jul 16, 2012 | 2006 Suzuki Grand Vitara
Aug 16, 2011 | 1996 Volvo 850
Dec 31, 2009 | 1995 Volvo 850
Jun 18, 2009 | 1985 Ford F150
Mar 31, 2009 | 1994 Volvo 940
Mar 01, 2009 | 1991 Volvo 240
Dec 07, 2008 | 1998 Volvo S70
161 people viewed this question
Usually answered in minutes!