Question about 2002 Ford Escape

2 Answers

IAC control valve. Locato\ion 2002 ford escape

IAC control valve. Location 2002 ford escape. Will this cause a hard start problem? Also will this cause the car to not idle. If so, were is the IAC valve located?

Posted by on

  • Anonymous Mar 17, 2014

    1997 ford probe were is the pressure idle control valve

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

If it's not idling and has problems starting, it's probably the IAC motor. It's located on the throttle body. Follow the airfilter box all the way to the engine, where the rubber flex hose attaches. The throttle body should be the first aluminum part you come to. Attached to the side you'll find small little aluminum part with a small wire harness attached. Unplug it, take the IAC motor off and clean inside with carb cleaner. This should fix the problem with the idle.

Posted on Sep 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

ITS LOCATED BEHIND THROTTLE BODY ON THE INTAKE MANIFOLD.BEST TO SCAN IT.A CLOGGED FUEL FILTER OR BAD FUEL PUMP WILL CAUSE HARD STARTING PROBLEMS.BAD PLUGS + WIRES WILL ALSO.SCAN IT TO CHECK ON TO SEE IF YOU GET A IDLE SPEED CONTROL FAULT CODE.

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 honda civic code p0505


Error Code: P0505
Fault Location:
Idle Speed Control (ISC) System - Malfunction
Possible Cause:
-Wiring harness.
-Idle speed control (ISC) actuator/Idle air control valve (IAC) valve.
-Throttle valve tight/sticking.
-Engine control module (ECM).

May 13, 2013 | Honda Civic Cars & Trucks

1 Answer

Engine code P1507


REPLACE YOU IAC VALVE! (IDLE AIR CONTROL VALVE).

Dec 11, 2010 | 2002 Ford Escape

2 Answers

I have a 2002 ford taurus. check engine light is on. Auto Zone did a scan today and the error code was p1507 can you please tell me what i need to do to fix this problem.


possible problems

Vaccuum leak
failed IAC valve
open or short
air inlet plugged

P1507 means "Idle Air Control Underspeed Error". It can be most commonly caused by a vacuum leak, a damaged Idle Air Control (IAC) assembly or a stuck IAC valve that needs cleaning. Essentially, your engine isn't idling at high enough according to your computer's programming parameters. Many times this shows up in colder weather as you try and start your vehicle. It will usually die unless you put your foot on the gas pedal and raise the RPM's. I have also read where a clogged air filter might be the problem. I would try cleaning your IAC valve first.

Oct 14, 2010 | 2002 Ford Taurus

1 Answer

My 2002 Ford Escape is poping up code p0420 and p1507 what is it?


Repair information for the OBD-II trouble code P0420 - Catalyst System Efficiency Below Threshold (Bank 1)

Answer P1507 means "Idle Air Control Underspeed Error". It can be most commonly caused by a vacuum leak, a damaged Idle Air Control (IAC) assembly or a stuck IAC valve that ...

Aug 17, 2010 | 2002 Ford Escape

1 Answer

How do i replace iac valve on 2001 ford escape


The IAC vavle is located behind the EGR valve on the driver side of the motor. You will disconnect 2 hoses and unplug the wire harness from the system. The unit will come right out. Just make sure that the hoses you take off go back in the same place. Also make sure that you have the negative battery wire disconnected. I had this same issue on my 2001 Escape, had to replace both the EGR and IAC so check both carefully.

Jan 03, 2010 | 2002 Ford Escape

1 Answer

I have a 2002 ford excursion 4x4 v10 it starts but when you put in gear it dies what could it be.


ck trans fluid level. if its low, it could cause this. or the IAC (idle air control) valve is faulty.

Oct 14, 2009 | 2002 Ford Excursion

1 Answer

How to fix mis firing of engine that cause shaking during idling for ford escape 2003


Sounds like it could be your Idle Air Control valve (IAC). The IAC does as it sounds and controls the idle in your vehicle. When these go bad, you can either clean them with a throttle body cleaner or replace them. Most people replace them as they are normally not very expensive and relatively easy to replace. The IAC is located on the throttle body which is where the air duct hose ends as it comes out of the air filter box. It is normally held on with a couple screws and just needs to be unplugged and plug the new one in. Please, please let me know if you have any further questions. If you can't find the location of the part let me know. Also if you don't think the IAC is your problem and have addition information that could point to something else, let me know. Here is a picture of what you are looking for: 656346b.jpg
This is the IAC for the 6 cylinder engine but it is different and more expensive on the 4. Let me know if you have the 4 and need a picture of it. Thanks for rating my response and for using FixYa!

Jul 30, 2009 | 2003 Ford Escape

1 Answer

Where is the iac on a 2002 ford escape 4 cylinder


I IAC is along the intake tube from the air filter housing to the Throttle body. There's going to be a two wire harness. It may even be on the air filter housing on the throttle body side. Good luck and hope this helps.

Jun 15, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2002 Ford Escape Logo

1,647 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...