Question about 1984 Toyota Land Cruiser

Open Question

Ihave a 60 series landcriuser and want to know what color wires go into the plug of the wiper switch to the plug

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford 150 . wipers don't work but washer still does work . could it be a fuse or wiper motor. or what? Ted H ope you can help thanks


Do you know how to test automotive electrical circuits ! Using a wiring diagram and a volt meter ? test power to the wiper motor .
Control from the switch .
http://www.bbbind.com/free_tsb.html free wiring diagrams . Enter vehicle info. year , make , model an engine size . Under system click body & accessories , subsystem click wiper / washer . click the search button then the blue link . Look at the diagram for pin # 's an wire colors , see fuse at top of diagram . Check B+ power with volt meter . Check the inputs from the wiper switch to the motor . If all the power an inputs are good , replace the wiper motor .

Jun 12, 2017 | Ford Cars & Trucks

1 Answer

How do I find the wiper relay on my 1997 BMW 740il. I ordered a factory wiper relay .its Tan in color, I cant find it. I need help from a professional can you help me.


It's located inside the power distribution panel.

The power distribution panel on your car is located under the hood in the engine compartment. It is located on the right passenger side closest to the firewall.

When you open the cover to the PDP, you'll see a series of blade type fuses in the front compartment and a bunch of wire harnesses in the back- that's where you'll find the tan colored relay you need to replace.

I have attached a youtube video for you to watch because it appears that the most common cause of this relay failure is due to water build up in the PDP compartment which is causing serious wiring deterioration and rusting- not only to the wiper relay but to the other relay components in that block.

So should you be experiencing the same problem when you open the power distribution panel, you'll know what to do.

http://youtu.be/PoX3w-D-kG0

Feb 28, 2015 | 1997 BMW 740il

1 Answer

? turn signal connector wires came loose only then wiper stop working + brake lights turn sig was searching for any help for wire diagram to get thing working again 2001 f150 its 7 wires, Thanks for a


Go to alldatadiy.com and buy the wiring for your vehicle. Other wise go to the junk yard and cut the plugs and wires out of an exact vehicle. This is the only two ways you will fix it. Exact diagrams or exact plugs and switches.

Nov 16, 2014 | Cars & Trucks

2 Answers

Windshield wipers on 1986 Ford Ranger stopped working


unplug the wire at the wiper motor and then turn the key on and then turn the wiper switch on and test the wires at the plug with a 12 volt tester . if u dont have any thing then ur wiper switch is bad , if u have juice at the plug then it sounds like its the motor.

Jul 13, 2012 | 1986 Ford Ranger 2WD

1 Answer

I need a wiring diagram for a 1960 caddy windsheild wipers


Here is the link to your 60' caddy wiring diagram.
http://www.auto-wiring-diagram.com/wp-content/uploads/2011/08/wiring-diagrams-of-1960-cadillac-all-series-part-2-e1313734688375.jpg

Jun 20, 2012 | Cadillac DeVille Cars & Trucks

1 Answer

Where to plug in the wiper/cruise wire from the switch on 84 chev


i think its part of that long connector that goes to the ignition switch

Apr 25, 2010 | 1984 Chevrolet Chevy

1 Answer

Neon wiper trouble


https://s24.postimg.org/g7k0yez1x/wiper.jpg

Click on the link
See the fuse, key on, use a test lite and check for voltage at fuse circuit, it should be hot.
See pins 4 and 5 at wiper motor, those wire colors should be voltage for hi and/or lo speed, use the test lite, check for voltage hi and or low speed on those wire colors.
At the moment, I think your wiper/washer switch is faulty?

Jul 09, 2017 | 2005 Dodge Neon

1 Answer

Replaced wiper motor but still won't work buzzes


can you move the linkage when you pulled the motor?

Aug 30, 2009 | 1995 Chevrolet C1500

1 Answer

Front wipers don't work


Winshield wipers inoperative in all switch positions:

Does your windshield washer work? Check circuit breaker in fuse panel. If it is good then you may have either a bad wiper motor or switch. If you have a volt meter check the white wire (going off 93 wiring color code) on wiper motor connector with switch in low to see if you have 12 volts. If you have 12 volts then you may have a bad wiper motor. If you don't then you may have a bad switch. Hope this helps.

Jun 21, 2009 | 1996 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...