Question about 1997 Honda Civic

2 Answers

How to remove transmission on 97 honda civic dx

Steps on how to remove manual transmission on 97 honda civic dx i removed all the housing bolt and mount bolts, trans will not slide out from motor what else do i need to do?

Posted by on

  • Anonymous Mar 14, 2014

    Lifter gap on a 97 Honda civic

  • Anonymous Mar 29, 2014

    What size is the motor mount bolt that bolts the motor to the frame of a 2001 honda civic

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Remove crossmember, axles, cables, tranny mount bolts (3), tranny to engine of course bolts

Go to autozone.com and register for full free online repair manual

Posted on Sep 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 138 Answers

Is this an automatic or manual transmission? are you sure all the bolts are out sometimes they hide 1 or 2 usually behind the starter. If it is an automatic did you remove the torques converter bolts. Last but not least have you removed the axles and cv joints? I would like to help you but need more info

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The driver's seat is broken in my Honda civic DX Coupe, how do I go about replacing it?


There's a bolt in each corner of the seat frame that goes thru the frame and into the floorboard. Remove these bolts, disconnect any wires, and pull the seat out. Same with the passenger seat if you want to put it on the driver side temporarily. The seat movement control will be on the inside though when you do this. Not a good idea, bit it can be done. Same seats, different actuator lever position.

Aug 17, 2017 | Honda Civic Cars & Trucks

1 Answer

How to remove sunvisor clip on a 1997 Honda civic dx?


I have a 96 Honda Civic and my clip broke. Finally got a new one and could figure it out. Finally did. Rotate the visor out of the way. Rotate the clip 90 degrees CCW. Gently pry down on the clip and remove. Installation of the new clip is opposite the removal.
7_11_2012_5_40_00_pm.jpg

Feb 27, 2012 | Cars & Trucks

1 Answer

What are the head bolt torque settings for a 95 honda civic dx 1.4


there is not a 1.4L listed in the 1995 civic dx there is a 1.5L and a 1.6L

1.5L

D15B7 & D15B8 engines
step 1 22lbs
step 2 43lbs

D15Z1 engine

step 1 22lbs
step 2 53lbs


1.6L VTEC

step 1 22lbs
step 2 53lbs

Sep 14, 2011 | 1995 Honda Civic

5 Answers

Where would I find my speed sensor on a 1996 honda civic dx in order to replace it, and how would i replace it.


It is located on the side of the transmission, requires 1 bolt, will notice a power plug which you must unplug wire connector, remove the bolt then the sensor canbe removed from your transmission it will pull out. Before installing your new sensor you may want to rub a little transmission oil on the part of the sensor that goes in transmission there is a o-ring on the part. This will help it go in alot more easier also lubricate you new part. Hopefully this was helpfull the sensor is around $100.00 - $140.00.

Jan 09, 2011 | 1996 Honda Civic

1 Answer

Torque para cabeza honda civic motor 1.6


1996-97 Civic and Civic del Sol
1.6L (D16Y5, D16Y7 and D16Y8) ENGINES

Tighten the cylinder head bolts to their final torque specification in four steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows:
  1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
  2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
  3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
  4. Step 4: Retighten only the two center bolts to 49 ft. lbs. (67 Nm).

Hope helps (remember to rate and comment this).

Sep 23, 2010 | 1997 Honda Civic

1 Answer

How do you take out an old alternator and install a new alternator in a 97 honda civic


From the top of the car remove the slide and anchor bolt from the alternater bracket. remove your 3 or 4 pin plug and diconnect the pos power line beside the 3 or 4 pin plug ( on the back of the alternater). now raise the car and from below remove the lower bolt that allows the alternater to swing back and forth. the bolt fits through the housing of the alternater. remove the belt. now the alternater is free. this lower bolt that was just removed attaches to a bracket bolted to the block. remove this bracket and the alternater will slide out of the bottom of the car. complete the above steps in reverse to install new part.

Nov 08, 2009 | 1997 Honda Civic

1 Answer

How do you install the hood release cable on a 96 honda civic dx?


TOOLS:
Screw Driver, Plastic Cup to place your bolts.

STEPS:
1. Buy a new latch for $20 max. or $5 from your local junkyard
2. Open your hood. Take out your grille. Front bumper. Driver side fender and plastic fender cover.
3. Take the plastic panel covering the hood release latch. (should have 1 plastic screw, just pop that with a flat-head screw driver)
4. Remove bracket (2x -10mm bolts)
5. Remove the entire broken hood release with your new one.
6. Place everything back
7. Enjoy!

Oct 22, 2009 | Honda Civic Cars & Trucks

2 Answers

1991 Honda Civic DX - antifreeze reserves


first off there should be one or two bolts on side or bottom if there is one remove then it will slide straight up. yes you want to clean it out with a house or in bath tube because it can cause plugs and other problems with new parts. let me know how it goes any more que. get back to me.

Jan 18, 2009 | 1991 Honda Civic

1 Answer

What wires come out of the manual transmission on a 97 honda civic


as fire as i'm aware? no wires however the ground earth cable from battery on some vehicles bolts to the clutch housing at some point where it attaches to engine block as do ford escorts etc? so g/box will have ground and is thick cable to provide for starter motor? some vehicles also have additional earth cable from battery to body/chassis for circuit for lights/ etc

Oct 23, 2008 | 1997 Honda Civic

Not finding what you are looking for?
1997 Honda Civic Logo

2,571 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...