Question about 2005 Ford Escape

2 Answers

2005 Ford Escape, put on diagnsotic machine, code given were PO106, PO109, PO171, PO300, PO316 and P2195. I have changed the Oxygen sensor, spark plugs and checked all air lines for leaks, hte car thumped while ideling and now is running smooth. What caused this and what do I do next?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Spread the Word:

    An expert who has shared 5 answers on their Facebook wall.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

When you use the diagnsotic read out the fault code need use a tool which also can clean the fault code .And then the car will be renew.If,still runs slowly ,need check the other place of your car. Use a universal diagnostic tool will be ok . You can find the tool on the obd2tool website ,also can get some free technique support.Hope this can help you .

Posted on Aug 21, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

How is it running now? Is it still happening? After parts are installed, computer will have to be reset with the diagnostic scanner as well. You can go to autozone.com and register for full free online repair manual

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Cadillac won't start. no ignition fire. codes po300,po014,po340,po341, po345, po346, po420, po430, po171, po174


codes p 0014, 0340, 0341, 0345, 0346 all refer to the cam shaft position sensor==causes include-- advance mechanism faulty - CMP sensor --insecure cam rotor --wiring short to ground --air gap--ECM
codes p 0420, 0431 refer to the cat converter=== causes --cat converter failed ---wiring --- HO2S ( heated oxygen sensor)
code p 171 is a faulty HO2S sensor and
p 174 refers to system too lean bank 2===causes --intake /exhaust leak---fuel pressure /pump---injectorr/s AIR system---hose connection/s

Nov 16, 2015 | 2005 Cadillac STS

3 Answers

Engine code p110


P0303 Code - Cylinder #3 Misfire
P0110 DTC - IAT Circuit Malfunction
P2195 O2 Sensor Signal Biased/Stuck Lean (Bank 1 Sensor 1) Code
Potential causes of a P2195 code include:
p2195
p219521
  • Oxygen (O2) or A/F ratio sensor or sensor heater malfunction
  • Open or short in O2 sensor circuit (wiring, harness)
  • Fuel pressure or fuel injector problem
  • Faulty PCM
  • Intake air or engine vacuum leaks
  • Faulty fuel injector(s)
  • Fuel pressure too high or too low
  • PCV system leak/fault
  • A/F sensor relay faulty
  • MAF sensor malfunction
  • ECT sensor malfunction
  • Fuel pressure too low
  • Fuel leak
  • Air suction in air intake system
  • A code P0303 may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer
  • Potential causes of the P0110 DTC include:

  • po110
    • IAT sensor shifted out of airflow
    • Bad IAT sensor
    • Shorted to ground or open on signal circuit to IAT
    • Open in ground circuit to IAT
    • Poor connection at IAT (backed out terminals, broken connector locks, etc.)
    • Bad PCM

Sep 25, 2014 | 2003 Ford Focus

1 Answer

My check engine light comes on and goes off so when it came on i checked the code and got a P2195 code on my 2005 ford mustang 4.0 liter. Could it be because I use low grade ethanol gas or what?


You obviously know nothing about todays
technology or codes

If had of Googled the code, you would see
it has to do with an Oxygen Sensor

Google: OBD P2195 Ford Codes

Vehicles have no way to know what fuel your putting in them

Aug 26, 2013 | 2005 Ford Mustang

1 Answer

6troubles codes reportd;PO133N2 SENSOR CIRCUIT SLOW RESPONSE


Don't know the vehicle you have ,so if your
front or upstream oxygen sensors are over
100,000 miles, they need changing, on all
your vehicles ,front only, leave rear monitors
until the converters wear out at 12 years or so

Then you can diagnose what ever is left

You got slow & lean sensors
Their old & tired & lost their switching
ability

Google the codes & read up

Change Spark Plugs every 3 years
Clean MAF Sensor-CRC MAF Cleaner
New Air Filter

Mar 13, 2013 | Ford Cars & Trucks

1 Answer

PO106 code on a 2007 Ford Escape XLT


you may have gotten a defective sensor, they are delicate and internal parts can break easily so handle with care.

Sep 29, 2012 | Ford Cars & Trucks

1 Answer

What's your problem? my 2004 mercury monterey has eight codes ,po301,poo53,po106,po316,po300,po304,po305,and po306


PO 300 is multiple misfires detected
PO 301, 304, 305, 306 are misfires in cylinders 1,4,5,&6
PO 053 is HO2S Bank 1 Sensor 1 Heater Resistance
PO 106 is MAP/BARO CKT Range / Perf
PO 316 is Misfire detected 1st 1000 Revs.

On a misfire, I usually push towards the spark plugs, plug wires, and coil packs / distributor coil.
You have PO 106 and PO 053 that need to be inquired about at nearest AutoZone.
They can give you an idea as to what is the problem on these.

Did a MAP sensor **** out and cause all the misfires ?
Did a misfire cause the MAP sensor error?
You see what I'm saying ?...Something caused all the misfires...thinking MAP...but not that familiar with the function of the MAP.

Hope this helps...

Aug 13, 2011 | 2004 Mercury Montery

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

1 Answer

I have a 2005 Ford Five Hundred has a CODE P2195 and only run at idle speed can you recommend a fix.


02 sensor is stuck lean ( bank 1 sensor 1 )--bank 1 is the side for # 1 cylinder. oxygen sensors usually wear out at between 80.000 and 100.000 miles. sensor 1 refers to front of convertor. p2195,

Oct 26, 2010 | 2005 Ford Five Hundred

2 Answers

Does anyone know what the code po316 is on the ford escape v6? there is also po300b,po303,po304b,po357and po353 codes


P0316 .... Engine Misfire Detected on Start-up (first 1000 Revolutions)

P0300b .. Random/Multiple Cylinder Misfire Detected

P0304b .. Cylinder 4 Misfire Detected

P0357 .. Ignition Coil G Primary/Secondary Circuit

P0353 .. Ignition Coil C Primary/Secondary Circuit

From codes you need new spark plus, Ignition Wires, and ignition coils

Feb 07, 2010 | 2005 Ford Escape

Not finding what you are looking for?
2005 Ford Escape Logo

576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...