Question about 2007 Volvo V70

Open Question

I have the same issue.

I have a JVC KW AVX 820 and the HTC Touch Pro2. I pair no problem, it even diplays on the DVD screen, but will not play thru the car. It turns on then right off. Intially I thought it may have been the Car unit, but now the phone has issues with my BT motorola headset. HS820. This phone definately has bluetooht issue. I have to unpair, the pair it up again. HELP!!!

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pippall
  • 1486 Answers

SOURCE: 1991 volvo stops running when right turn is mde

check transmission oil level.

Posted on Jul 12, 2009

  • 1 Answer

SOURCE: HTC touch pro 2 Bluetooth won't connect with 09 volvo

http://forum.xda-developers.com/showthread.php?t=583570&page=7

Posted on Dec 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Overhead DVD player in 2008 Toyota Sienna does not show the picture. Sound works.


Hello, I hope this helps. If no change then you probably have a hardware/ wiring issue and the dvd player may need to come out. Please advise
1. Confirm the DVD RSE system is inoperative. (blank screen) 2. For vehicles with Toyota navigation system: Perform the following procedure to turn OFF the RSE Lock function. A. Press the INFO switch on the navigation unit. B. Press the "Screen Setting" touch button on the navigation display. C. Under the "Rear Lock" option, press the "OFF" touch button and then press "OK" in the upper right part of the display. D. Press the DVD switch on the RSE system (if a DVD is NOT already in the player, insert one) and confirm screen is ON and the system will play DVDs. 3. For vehicles without Toyota navigation system: Perform the following procedure to turn OFF the RSE Lock function. A. Push the Audio Control knob multiple times to cycle through the various options (Bass, Mid, Treble, etc.) until "REAR LOCK" is shown on the screen. B. Turn the Audio Control knob so the display says "OFF" next to "REAR LOCK". C. Press the DVD switch on the RSE (if a DVD is NOT already in the player, insert one) and confirm screen is ON and the system will play DVDs. 4. If the above procedure resolves the concern, explain the system operation to the customer.This procedure is described in the Audio/Video" section of the vehicle Owner's Manual. 5. If the above procedure does NOT resolve the concern, perform RSE diagnosis using the Technical Information System (TIS), 2006 model year applicable vehicle Repair Manual.

Jun 29, 2015 | 2008 Toyota Sienna

1 Answer

I put a brand new xtron cd dvd plus navigation stereo in my infinity qx4 suv ut the dvd put a message that said dvd is disabled for your safety what can i do to resolve that


These DVD devices are defaulted to "off" while moving to comply with motor vehicle laws that prohibit a screen from being visible to the driver when the vehicle is in motion.

Typically, there is a wire that is connected to the hand brake / parking brake circuit. If the wire is connected to (+)12V *OR* (-)12V it will enable the DVD to play. Of course, connecting to the wrong one will instantly turn the player into toast.

Locate the wiring diagram for your model to find the cable associated with the parking brake circuit. With a digital voltmeter, set to DC Volts at a range closest to - but not less than 15 Volts DC. Black lead to the - jack and the red to the + jack of the meter. Touch the black probe to ground and the red to a 12V source. You should see a 12 to 15 volt indication. Reverse the probes and you should see the same value, but with a (-) indication. Now you know that black is - and red is +.

SET the brake and turn the DVD on and play. Touch the black probe to a good ground location. Touch the red probe to the brake wire. Note the voltage. It may be 11 - 15 V or 0 to as much as 2 volts. RELEASE the brake and repeat. The voltages should be reversed with the brake RELEASED. If the DVD played with 11 - 15 volts on the wire, connect it to a constant 12 V source. If it played with 0 to 1 or 2 volts, connect it to ground.

Good luck!

Mar 10, 2015 | Cars & Trucks

1 Answer

Nav touch screen diplay check your disc


try a new store bought disc, does it work>?
if yes , yours old disc is bad.
or wrong format.
no year stated.

Feb 06, 2014 | Honda Cars & Trucks

1 Answer

Whenever I apply my left signal turn, my screen flashes on my JVC kw av 60bt deck ,message -check for safety behind with your eyes


Did the vehicle come from the factory with a jvc stereo or did someone install it ?If the stereo was not installed by the factory whoever installed it hoooked up the power wire to the blinker power wire and if the factory did install it i would buy a new blinker relay .

Oct 19, 2012 | Cars & Trucks

1 Answer

DVD player for Chrysler Town and Country


they have manuals free on their website. just put in your vehicle information.
http://www.chrysler.com/en/owners/manuals/

Feb 26, 2012 | 2010 Chrysler Town and Country

1 Answer

Hi is there any up date disk for my 54 plate touch


Yes! there it is!
but before you do anything check with the dealer if they work on your system. i heard some people having issues buying updates for their Rovers and they got issues using the software and it was because they were not compatible.

Dec 01, 2009 | 2004 Land Rover Range Rover

1 Answer

Can't get the DVD player to wok in my 2006 Lexus GS300


Repair Procedure
1. Confirm the customer's complaint of DVD RSE system inoperative.
2. For vehicles with Lexus Navigation System, perform the following procedure to turn OFF the RSE Lock function:
A. Press the INFO button to display the "Information" screen on the navigation unit.
B. Press the "Screen Setting" touch button on the navigation display.
C. Under the "Rear Lock" option, press the "OFF" touch button and then press "OK" in the upper right part of the display.
D. Press the DVD switch on the RSE system, (If a DVD is NOT already in the player, insert one) and confirm screen is "ON" and the system will play DVD's.
3. For vehicles without Lexus Navigation System, perform the procedure to turn "OFF" the RSE Lock function.
A. Push the audio control knob multiple times to cycle through the various options (Bass, Mid, Treble, etc.) until "Rear Lock" is shown on the screen.
B. Turn the audio control knob so the display says "OFF" next to "REAR LOCK".
C. Press the DVD switch on the RSE (if a DVD is NOT already in the player, insert one.) and confirm screen is "ON" and the system will play DVDs.
4. If the above procedure resolves the concern, explain the system operation to the customer. This procedure is described in the "Audio/Video" section of the vehicle owner's manual.let me know lf this helps.

Jun 14, 2009 | 2006 Lexus GS

3 Answers

Ford blue tooth connection with my LG viewty phone


Car should be under warranty. First stop is to the dealership. Sounds like sync software issue. You may need to wait until an update is available. Good luck. 

Sep 11, 2008 | 2008 Ford Focus SE Sedan

Not finding what you are looking for?
2007 Volvo V70 Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...