Question about 1995 GMC Sonoma

1 Answer

Dome lights wont shut off

Hello the plunger that pushes in when the door is closed to shut off my dome light is gone i dont know what happened to it so my dome lights will not shut off so i went in and disconected it in the dash to create a open so my dome lights wouldnt stay on and they didnt go off so what do i do minuse the idea of getting new plunger for it is it a short instead of a open and if so there are three wires what one is shorted?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Sounds like there might be 2 feeds coming to where you disconnected the switch, I would co to the reckers & get another one from a similar car. Most of them complete the circuit when they close the switch/door open when the door closes then switch it left hanging open.

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why don't interior lights come on when door is opened


The plunger button may be stuck in. It's around you door frame or on your door and sometimes will rust in. Does your light work manually? If so then it has to do with this plunger If plunger moves in and out freely, make sure it is coming out all the way. If not, then it may be a fuse gone. In that case, locate the dome light fuse in the box and check it Hope this helps

Aug 22, 2014 | 1999 Dodge Intrepid

2 Answers

THE INTERIOR LIGHTS TO MY 98 BUICK LASABRE WON'T TURN OFF. I TRIED TO TURN OFF THE CAR BUT THEY STaY ON THEN WHEN I START IT AGAIN. THEY TURN OFF MOMENTARILY THEN COME BACK ON. WHAT SHOULD I DO?


do you not have a switch on dash for them? try turning the switch counterclockwise to turn them off. or you may have a bad switch on the door jam,,look for a plunger swictch on the door jam itself push the plunger in on the doorjam,,if the lights go off, then you'll know the problem! hope this helps!1

Sep 16, 2010 | 1998 Buick LeSabre

1 Answer

Door ajar light stays lit when all doors are shut 2005 GMC Canyon


Hi,
This seems that either of the door switches is/are faulty. Try pushing the switches fully on each plunger switch on each door individually, keeping the other doors closed while you do. See if one of them causes the light to go out. If you do find one turns the light off, it's an adjustment problem with the plunger switch. May still need to be replaced if it won't depress enough with the door closing to turn off.Let us know if you were looking for something more else please accept the suggestion.
Thank You for contacting Fixya.com

Feb 17, 2010 | 2004 GMC Canyon

2 Answers

2003 crown vic multi switch


if there was power to the washer pump and its not working, it means the pump itself has gone bad. the dome light problem sounds like a door jam switch gone bad. unplug one by one until you find which one shuts the light off, then either replace it or leave it disconnected. if your headlights are dull, i would check the voltage going to them. if the voltage seems ok, i would look for a weak or corroded ground. could also try replacing bulbs. good luck!

Jan 25, 2010 | 2003 Ford Crown Victoria

1 Answer

2001 Sequoia, door ajar light goes off, but dome light stays on. Door ajar light comes on with slight pressure against closed door. Can replacing the door jam switch solve this problem? Why would the door...


To temporarily solve the light problem, I taped a washer to the inside of the door where the door hits the plunger on the light switch. A permanent solution would be to drill a hole in the door at this spot and put a self taping screw in that will trigger the switch sooner. I figured out the reason the dome light stayed on is due to the courtesy light timer and the lights would have eventually gone off.

Nov 12, 2009 | 2001 Toyota Sequoia

7 Answers

Dome lights won't turn off


Been having a problem with the dome lights on a 99 chevy blazer. Still can't figure out what the problem is. There is a dome light overide button located under the dimmer wheel. When I push the overide button in the dome light goes off, but when I open any of the doors the dome light will not come on. When the overide button is out the dome light stays on all the time and will not turn off even though every door is closed. I checked all the pushbuttons and everything tests good. Has anyone had this problem and know how to fix it?

Sep 04, 2009 | 1997 Chevrolet Blazer

3 Answers

2003 Volkswagen Jetta Door Ajar Light wont turn off and car alarm


it is your door switch.you need to replace it.since the door is open as far as the computer is concerned,it will set off the alarm.

Jun 12, 2009 | 2001 Volkswagen Jetta TDI

1 Answer

1999 Mercury Sable Dome Light won't shut off


Next to the headlight switch is a dimmer dial for the interior dash lights... if you turn it all the way up, the interior lights remain on... there is a "detent" on the dimmer. turn the interior dash lights all the way full on ...you'll feel the detent, then turn it down back past the detent a little bit...that should cancel the interior courtesy lights... wait a bit because the interior lights are sometimes on delay timers....
good luck let me know what happens.

May 09, 2009 | 2001 Mercury Sable

1 Answer

Dome Light in Saturn SL/1 Not Working


turn the key on then push in on the plungers, also twist and turn them. with the key off the light is on a timer and will not go off right away. if the key is on the light should go on and off with plunger movment.

Mar 07, 2009 | 2001 Saturn SL

Not finding what you are looking for?
1995 GMC Sonoma Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...