Question about 1995 GMC Yukon

1 Answer

Its got a slow leak where the 4 hoses meet its a little plastic peice that the hoses clamp to theres like a regulator or somethin on the plastic peice that connects to the ac lines or pump thing what would it be called the pice that connects the 4 hoses

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Wow, hard to picture that. Try looking here:
http://townhall-talk.edmunds.com/direct/view/ed_displayMakeModelRelatedDiscussions!make=GMC&model=Yukon

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Coolant leaks from front of engine compartment on 1989 Ford F-150


have a coolant pressure test done on the system and find the leaks. If it is an old radiator with plastic tanks then the tanks may be split (common) -check radiator hoses for splits and radiator cores for leaks. If the hose is enlarged past the clamp replace it as it is about to burst anyway check water pump and check all points where hoses are clamped onto aluminium housings as they corrode under the hoses.

Dec 21, 2013 | 1989 Ford F 150

2 Answers

Trying to bypass the heater core. its leaking into the car.. i dont have the mmoney to fix it so i want to put the 2 hoses so it atleast stops leaking.. 8165276853.. if anyone can help it would be great. i...


Hey John,
You should find two hoses leading into the passenger side of the firewall under the hood, one is input, the other is obviously output,. cut & splice,. you should be fine (as long as it doesn't get too cold where you are)...
Ck

Feb 13, 2011 | Oldsmobile Aurora Cars & Trucks

1 Answer

2003 dodge caravan is slow to pick up speed


Replace the fuel filter as a first step, but also check for a faulty fuel regulator. Find the fuel regulator near the throttle body in the fuel line and pull off the rubber hose and see if there are any traces of fuel dripping out of the rubber hose. The hose is for air only and fuel in that hose indicates the fuel regulator requires replacement. Also check for vacuum leaks in the hoses from the motor's intake to the crankcase where the PCV valve is located. Relatively small holes in that area will cause poor acceleration and a lean condition in the motor and loss of power or hesitation. Also check the plastic air tubes going from the air filter box to the throttle body area to make sure everything is tight and there are no holes. Holes or leaks there will cause hard starts and poor driveability.

Jul 25, 2010 | 2003 Dodge Caravan

1 Answer

Where is the fuel filter located on a 1994 dodge ram


Fuel Filter REMOVAL & INSTALLATION CAUTION
Never smoke when working around gasoline! Avoid all sources of sparks or ignition. Gasoline vapors are EXTREMELY volatile! All 1989–93 Gasoline Engines and 1994–96 2.5L Engines The fuel filter is located in the fuel line on the inside of the left frame rail, just ahead of the crossmember. Fig. 1: Fuel filter location for gasoline engines 88471011.gif
  1. Relieve the fuel system pressure as described in Section 5.
  2. Unfasten the filter retaining screw and remove the filter from the frame rail.
  3. Wrap a shop towel around the hose connections to catch fuel spillage. Loosen the fuel hose clamps and disconnect the hoses from the filter.
  4. Remove the old fuel filter and replace it with a new one.
  5. Connect the fuel hoses and tighten the hose clamps. Position the filter on the frame rail and tighten the retaining screw to 75 inch lbs. (8 Nm).
1994–96 Gasoline Engines — Except 2.5L The fuel filter is integrated into the fuel pressure regulator which is mounted in the fuel tank. This unit is not controlled by the PCM or engine vacuum. It is calibrated to deliver approximately 35–45 psi (241–310 kPa) of fuel pressure to the injectors. If the pressure exceeds the maximum of the specified range, an internal diaphragm closes to route fuel back into the fuel tank. This system eliminates the need for conventional return lines from the engine bay and accounts for the name of the "Returnless'' fuel injection system employed in these vehicles. NOTE: Fuel tank removal is required for this procedure. Also needed will be external snapring pliers and proper hose clamp pliers, such as No. C-4124 pliers (available through Plymouth/Dodge dealers), or equivalent.
  1. Relieve the fuel system pressure as described in Section 5. Fig. 2: With the fuel tank removed, twist and pull the fuel filter/regulator for removal from the rubber mounting grommet 88471707.gif

  2. Drain the fuel tank and remove the tank.
  3. Remove the fuel filter/regulator (which is pressed into a rubber grommet) by twisting and pulling it straight up. Fig. 3: Use snapring pliers to remove the retainer securing the cover tube to the base of the filter/regulator 88471708.gif

  4. Remove the snapring retaining the cover tube, then slide it down to reveal the clear plastic fuel tube and its retaining clamp. Fig. 4: Cut off the old tube clamp without damaging the plastic fuel tube 88471709.gif

  5. Gently cut off the old clamp without damaging the tube, then discard the clamp.
  6. Carefully pull the tube off, then remove the filter/regulator from the fuel pump module. To install:
  7. Install a new clamp over the plastic fuel tube and attach it loosely to the filter/regulator. Rotate the unit in the line until it is pointed to the driver's side of the vehicle.
  8. Tighten the clamp using hose clamp pliers such as No. C-4124 (available through the Plymouth/Dodge dealer). NOTE: Do not use conventional side cutters to tighten the clamp.
  9. Slide the cover tube up to the bottom of the filter/regulator and install the snapring.
  10. Carefully press the assembly back into the rubber grommet by hand. It should be pointed to the driver's side of the vehicle.
  11. Install the fuel tank.

Jul 14, 2010 | 1994 Dodge Ram

1 Answer

I am trying to replace the fuel filter on my 2001 Dodge Ram 3500 Van. I can't seem to find it. Can you tell me where it is located?


Fuel Filter for 5.2 L Removal & Installation To Remove:
dod_trk_fuelpressurereg.gif

NOTE: The combination fuel filter and fuel pressure regulator is located on the top of the fuel pump module.
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:
    • The fuel tank
    • Any debris around the filter/regulator to prevent contaminants from entering the pump module
    • The fuel filter/regulator from its rubber grommet by twisting and pulling straight up CAUTION
      To prevent damage to the coiled fuel line, ensure the filter/regulator is not more than three inches from the fuel pump module.
      dod_dur_fuelpresregclamp.gif

    • The old fuel line clamp, by carefully cutting it ensuring not to damage the plastic fuel line (discard the clamp)
    • The plastic fuel line from the filter/regulator by gently pulling downward
    • The filter/regulator from the fuel pump module
To Install:
  1. Install or connect the following:
    • A new clamp over the plastic fuel line
    • The filter/regulator to the fuel line NOTE: Rotate the filter/regulator in the fuel line until it is points toward the front of the tank.
    • The line clamp to the fuel line using special Hose Clamp Pliers number C-4124 NOTE: Do not use conventional side cutters to tighten this type of clamp.
    • The filter/regulator into the rubber grommet, pressing by hand
  2. Rotate the filter/regulator until it points towards the front of the vehicle.
  3. Install the fuel tank.
  4. Check for fuel leaks.

Jul 10, 2010 | 2001 Dodge Ram 3500 Truck

1 Answer

Rear heater core line leaking, can I fix w/ rubber hose and clamps? The leak is right below drivers side door. There are four lines that run to rear heater core but only one is leaking.


yeah hose and clamps are the cheap easy way to go there, or if your lucky, the leak is right at the spot where the hose meets the metal and you can just cut the end off and put it back with the old clamp

Jun 27, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Our 2000 gmc 2500 7.4 engine the antifreeze runs between the valve cover and the intake cannot find where fluide come from, check hose fitting, help


hello, i had a 1997 chevy dually, had same problem, the way gm changed their clamps for hoses, now the clamps sorta hold their self, there made of plastic, and they slip into each other, they are like male and female connections, they slip into each other, i would check all radatior hoses, heater core hoses, i had 6.5 turbo diesel, great motor, only thing is the clamps for heater hoses was plastic, just like on the rocker arms, on the 6.5 they have a nylon plug that holds rocker arms in place, keeps them moving from side to side, they have to be changed at least, 150,000, mine broke off, had to replace 2 pistons, pushrod came out went into motor and broke the skirts off two pistons, very expensive, i would check all clamps with the plastic male to female, ends, maybe that will help, also check thurmostat cover, been known to leak a little too.

Feb 01, 2010 | 2000 GMC Sierra

1 Answer

Changinge fuel flitter and broke the plastic contector peice what do i do now and does that go to the fuel pump


Are you talking about the hose clamp? It would be the piece that clamps down on the fuel line. If so, you can get new ones at any auto parts store. Or, if you broke the actual filter itself, you could probably cut the hose a little short and get a new filter.

Aug 30, 2009 | 1999 Plymouth Grand Voyager

1 Answer

How to change fuel filter on 2000 dodge durango


Here ya go! Please don't forget to rate!

NOTE: A combination fuel filter and fuel pressure regulator is used on all engines. It is located on the top of the fuel pump module.
To Remove:

6a30b02.gif
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Drain and remove fuel tank.
  3. Clean area around filter/regulator to prevent contaminants from entering pump module.
  4. Remove or disconnect the following:
    • Fuel filter/regulator by twisting and pulling up CAUTION
      Do not pull filter/regulator more than three inches from fuel pump module.
    • Old fuel tube clamp by gently cutting clamp, taking care not to damage fuel tube
    • Plastic fuel tube from filter/regulator by gently pulling downward
    • Filter/regulator from fuel pump module
To Install:
  1. Install or connect the following:
    • New clamp over plastic fuel tube
    • Filter/regulator to fuel tube by rotating filter/regulator in fuel tube until it is pointed towards front of tank
    • Line clamp to fuel line using special hose clamp pliers (number c-4124 or equivalent)
    • Filter/regulator (pressing by hand) into rubber grommet
  2. Rotate filter/regulator until pointed towards front of vehicle
  3. Install fuel tank.
  4. Check for fuel leaks.

Jul 11, 2009 | Dodge Durango Cars & Trucks

1 Answer

Windows fall


window regulator looks like a bow with a snallcable that attaches to the motor and to the part that raises. The little white plactic fingers break where it holds the cable on the window raiser. I go in and make a metal peice to clamp cable. Grind out enough plastic and attach with two short seldtapping screws. Then when I get everthing togwether **** the peice I made with the grove in it,

Jul 29, 2008 | 2006 Cadillac DeVille

Not finding what you are looking for?
1995 GMC Yukon Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...