Question about 2003 Ford Mustang

2 Answers

I have a 2003 ford mustang gt stick shift. clutch sliping

I have a 2003 ford mustang gt stick shift. when i am driving my clutch will slip like my clutch is still ingaged just a lil bit and when i stop i can keep it in gear and not hold anything and it will not stoll r turn of

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Make sure your master cylinder and slave cylinder are operating. If the clutch hasn't been replaced in a while (or you have been especially hard on the clutch) it could just be worn out.

Posted on Sep 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 386 Answers

Sounds like you have a worn or misadjusted clutch, but if your clutch is self adjusting meaning a operated with hydraulic pressure (Brake Fluid) then you could have leaking slave cylinder that maybe wetting the clutch disc with brake fluid causing a slippage, or just a worn clutch, in which case you will need to inspect inside bellhousing...

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gearshift sticks in park 2004 gt mustang 40th annv


Sounds like the interlock is out of adjustment. There is a switch on the brake pedal lever which sends a signal to release the shifter by reading the brake light signal. Often this switch gets hit by the Drivers feet and has either moved or broken. Your shifter will act up if the Ignition switch rod has slipped out of adjustment or if the ignition switch has slipped on its mount on the steering column.

Jan 17, 2014 | 2004 Ford Mustang GT

1 Answer

2009 ford mustang v6, standard, will not accelerate, no matter in which gear I am in why?


Sorry old son but your clutch sounds like it has gone to the big junk yard in the sky reserved for dead clutches . When a clutch starts to slip it will continue to do so until that is all it will do . solution a new clutch is required .

Nov 19, 2013 | Cars & Trucks

1 Answer

My car is squealing.


sound like u need a new belt. its slipping or a pulley is bad

Feb 28, 2013 | 2004 Ford Mustang

1 Answer

Ford mustang was making a whine/ rattling noise while doing 20-60 mph then after driving 20 minutes she died at a stop sign, would start up fine in park, but died when we tried to shift,what is wrong


Automatic or stick ?
If its an automatic, it could be something in the torque converter or transmission. The torque converter clutch could be stuck.

Dec 20, 2012 | 1989 Ford Mustang

1 Answer

Hard to shift into second, 2nd


Sounds like the clutch could be going, or the transmission has been beaten on an is getting bad. Try a new clutch first.

Jul 23, 2012 | 2006 Ford Mustang

1 Answer

2003 FORD FOCUS CAN'T CHANGE GEAR BUT CLUTCH IS NOT SLIPPING


if clutch not slipping, problem is in the shift linkage or cable could be damaged or need adjusting.

Jan 31, 2012 | 2003 Ford Focus

1 Answer

Gear slipping between 2nd and 3rd


most shifting probs on the late model vehicles are caused by the shift solenoids or the vehicle speed sensors. look at that first, then figure out when you last had the trans fluid changed and the filter replaced, and the bands adjusted.

Jul 20, 2009 | 1995 Ford Mustang

1 Answer

Gears slip


the transmission is fine its the springs in the preasure plate that have shrunk and the clutch needs to be replaced.
I hope this advice helps.
can u rate the advice please

Feb 26, 2009 | 1996 Ford Mustang

1 Answer

2003 ford mustang


HI, i have the samme problemeon my mustang gt 2006
idid hevriting ,plug chek wires , and the probleme was the valve was sticking on the guide ,we change the head , and now it is very jood, good luck
it was misfiring whit no code

Sep 04, 2008 | 2006 Ford Mustang

1 Answer

Drivetrain problems


you know some mustangs have an adjustment system on the clutch pedal, and might need adjustment, or if you install a rebuilt clutch instead of a new one some times they come unbalance and vibrate if you did just never again trust a rebuilt clutch kit

Jun 15, 2008 | 2001 Ford Mustang

Not finding what you are looking for?
2003 Ford Mustang Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...