Question about 1995 GMC Jimmy

Open Question

Need to remove signal, wiper switch on 95 gmc

Need to remove signal, wiper switch from steering column on 95 gmc topkick

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ndguy2481
  • 251 Answers

SOURCE: Replace multifunction switch on Pontiac Gran Prix 2000

no just the top and bottom of the steering wheel cover

Posted on Dec 07, 2008

alicantecoli
  • 22095 Answers

SOURCE: How do I remove and replace headlight switch 95 Suzuki Sidekick?

steering wheel off ,airbag removed first to get to retaining nut.best advice unless you have a mechanics toolkit to hand is to entrust it to agent ,as they will know quickest way to do it.

Posted on Dec 25, 2008

  • 366 Answers

SOURCE: remove steering wheel on 95 gmc jimmy

u will need a steering wheel puller,u will have to disharm and take airbag off if equip.,i would suggest to get manual it explains step by step procedure!

Posted on Apr 25, 2009

  • 335 Answers

SOURCE: 1989 GMC Sierra 3500 loose tilt steering column

Without taking the tilt mechanism off you can only reach 2 of the 3 bolts. If you use 1/4 in. socket on 1/4 in drive with 6 in extension you can just get at the left bolt. If you remove the tilt spring you can get to the bottom bolt. To remoce tilt spring retainer use standard Phillips.

Posted on Jul 19, 2009

  • 113 Answers

SOURCE: steering column diagram for 1993 s-10 blazer

a haynes manual from the parts store will have that in there. about 20 bucks for the manual.

Posted on Jul 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition switch removal/replacement for 1995 vw passat


Disconnect the negative battery cable. Remove the steering wheel, and then remove the steering column covers. Remove the turn signal and wiper switches. Disconnect the ignition switch wiring. Remove the clamping washer, spring and contact ring from the steering column, and then remove the lock housing up off the column tube and steering column. Remove the ignition switch mounting fastener and remove the switch. Installation is in reverse order of removal noting the following: Press the contact ring, spring and clamping washer onto the steering column using a properly sized and sturdy metal pipe or tube. If after installation of the clamping washer, the steering column is not projecting out far enough, pull the steering column out further.

Jan 23, 2013 | Cars & Trucks

1 Answer

HOW TO REMOVE STEERING WHEEL ON A 1991 S10 PU 2 WHEEL DRIVE TO GET TO COLUMN MOUNTED WIPER SWITCH


the wiper switch just pulls out with a little force you only need to pull the steering wheel if you are removing the turn signal switch.

Jan 03, 2011 | 1991 Chevrolet S-10 Blazer

1 Answer

My wiper on my 2000 gmc jimmy went crazy. I cant


its part of combination switch need to remove steering column cover to get switch off

Mar 19, 2010 | 2000 GMC Jimmy

2 Answers

1994 ford tauris windshirld wiper switch


Remove plastic cover around column, three or four screw's, then remove three small bolt's on wiper switch same switch as turn signal there together, disconnect harness and remove and replace with new switch, there's no service to switch if bad it just get replace.Hope this was very helpful

Jan 21, 2010 | 1994 Ford Taurus

1 Answer

How do you remove/replace wiper switch on 1995 jeep grand charokee


Disconnect and Isolate Negative Barrety cable. Remove screw in bottom of steering column shroud cover. ( bottom side of steering column between wiper switch and turn signal switch) Unsnap shroud halves and remove from column. Disconnect wireing harness connector from multi function switch. Remove 2 screws securing switch to mounting housing. Install in reverse order.

Oct 25, 2009 | 2000 Jeep Grand Cherokee

2 Answers

When I turn on my signal light the wipers turn on


to correct this you must replace the mulitfunction switch.

Sep 18, 2009 | 1992 GMC Jimmy

1 Answer

Where is the wiper motor on a 2003 gmc sierra


Replace the multifunction switch where the wiper switch and turn signal are located on the steering wheel. There are two screws that hold it on and you can remove the cover on the steering wheel with a tork wrench #6 I think, could be next size down #4 then remove the two screws holding the switch in place. And disconnect the wiring Replace the multifunction switch where the wiper switch and turn signal are located on the steering wheel. There are two screws that hold it on and you can remove the cover on the steering wheel with a tork wrench #6 I think, could be next size down #4 then remove the two screws holding the switch in place. And disconnect the wiring connector and replace. connector and replace. If you need more help post here and Thanks for using Fix-ya.

Aug 23, 2009 | GMC Sierra 2500HD Cars & Trucks

3 Answers

How to replace my turn signal switch


Multi-function Switch Removal & Installation To Remove:
To Remove:
  1. Remove the steering column trim covers.
  2. Remove the wire harness from the retainers as needed.
  3. Slide the turn signal and multifunction switch connectors out from the bulk head connector.
  4. Remove the two mounting screws and remove the multi-function switch from the steering column.

To Install:
  1. Install the multi-function switch on the steering column.
    • Tighten the screws to 42 lb in (4.7 Nm).
  2. Slide the turn signal and multifunction switch connectors into the bulkhead connector.
  3. Install the harness in the original retainers.
  4. Install the steering column trim covers.
7f81df3.gif

Jun 25, 2009 | 1996 GMC Sierra

1 Answer

Smoke from 95 Camaro steering column


Where ever there's smoke, there's fire. This could be the multifunction switch arching and burning the lubrication in the assembly. Multifunction meaning, one switch that operates the turn signal wipers, cruise etc.

Mar 27, 2009 | 1995 Chevrolet Camaro

2 Answers

How do I remove and replace headlight switch 95 Suzuki Sidekick?


steering wheel off ,airbag removed first to get to retaining nut.best advice unless you have a mechanics toolkit to hand is to entrust it to agent ,as they will know quickest way to do it.

Dec 25, 2008 | 1995 Suzuki Sidekick

Not finding what you are looking for?
1995 GMC Jimmy Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...