Question about 2006 Chrysler 300

1 Answer

Chysler 300 stalls

I have that exact problem, I got the trottle body cleaned, now a mehanic is saying I can change the EGR valve if I want to. But two mecanics so far cannot find a problem with the car. It's very frustrating.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 22,156 Answers

Not sure here but i do understand the problem,so frustrating i know but ?? only suggestion i can make and that is to put it into a dealer because a lot of new cars from 2005 onwards are using encrypted software so your snap on scanner might read a code but its the wrong one---- look on some of these so called wonder tune web sites ,,,,software that was 4500dollars is now selling for 350 ,then ask yourself why??? its obsolete .New cars are put on the computer then its connected via the internet ,with lots of security like finger print recognition .Dealersdo not have the software on a disk like before so thatcopies can be made and then worked over by teh likes of snap on or mac tools or reflex or brainbee

Posted on Sep 10, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1993 Honda Accord loses power,stumbles I pat the gas and it will pick back up check engine light comes on and it will run fine

why not finish the tuneup, spark and air filter.
also the EGR valve is a 50k service point.
if the EGR sticks open, Just before a stop sign driving
this is a sure sign of a stall ,by EGR. failure (clean it)
my pat gas.
so you are really saying, the rpm drops way below normal?
at idle , then stalls.
but the fast right foot saves the stall?
below 400rpm most cars stall. 300 for sure.
the CEL will flash on just at or just after the stall. RPM based action it is.
and if the stall is easy to save?" is it, super easy,? then the ISC is failing, the idle speed controller.
if on the other hand the skipped fuel tune up, its all nasty bad spark then all hope is lost , for ISC and ALL.
do the tuneup first, see the list?

Nov 08, 2013 | 1993 Honda Accord

1 Answer

Idle adjustment

idle is not adjustable
pcm decide the idle rpm by iac valve
try to clean trottle body plate and iac hole with combustion chamber cleaner and pour the rest at the trottle body engine idle enough not to stall engine

Oct 11, 2013 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

My gmc sonoma (1996) 2.2 wants to stall when slowing to a stop and i cant figure out if its the IAC or the egr system do you have any suggestions?

the iac, when you start the truck cold does it idle up and then slowly drop? remove the egr valve and make sure theres no carbon holding the valve open, then drive it with the vale hose dissconected and see if it stalls, if it doesnt stall with the valve hose removed and pluged then i would say the egr valve, but if it still stalls then it may be the valve, also make sure the throtle body and the plate is clean, use old tooth brush and some crab cleaner to clean, do this with engine off, try these things first,

Jun 26, 2010 | 1996 GMC Sonoma

1 Answer

Have a 401 code have changed all emission parts and cleaned throttle body any solution

Engine size? year? This code is for insufficient egr, usually caused by clogged egr passeges or a bad DPFE sensor. Open egr valve, if the engine idles real rough or stalls, replace the DPFE sensor. If the idle does not change, then take the egr valve off and clean the passages. You cant just keep changing parts hoping you get lucky and change the correct one.

May 24, 2010 | Ford F-150 Cars & Trucks

2 Answers

Stalls at idle no fluxuation in voltage at iac

It is most likely the EGR (Exhaust Gas Recirculation) valve.
The valve is supposed to close when the car is idling and open other wise.

Inspect it / Replace it.

Hope this helps!

Sep 17, 2009 | 2003 GMC Sierra

2 Answers

Lexus rx300 2002 starts and immediately stalls.

I have a 2001 Lexus RX300 with 120,000 miles on it and I know exactly what is wrong with this car. You either need a new a new Idle Air Control Valve (IACV) or you must clean the one you have with some throttle body cleaner. I cleaned mine a couple of years ago. They are usually good for about 80,000 miles and then they get dirty due to emission controls (smog being recirculated and reburned). The IACV is located near the trottle body on the underside. Check and you will see specific instructions on how to clean this throttle body. It costs you a can of throttle body cleaner and some of your time and this condition will not occur again - I did it!

Jul 17, 2009 | 2001 Lexus RX 300

3 Answers

2001 ford explorer sport,6 cylinder,rough idle and stalling....unplugged mass air sensor...seems to idle fine then...can u help me?

If there is a Auto Zone around your area, have them scan the Explorer for any DTC codes since it's fee of charge. But in the mean time buy a can of MAF cleaner and follow the instructions and also buy a can of Trottle body cleaner and follow the instructions on the can. Clean the MAF and the Throttle body, also try to get the Idle Air Control falve cleaned too which is on the throttle body. So use up the whole can of Throttle body cleaner and it would not hurt to use two cans. Once everything is cleaned that should fix the problem, the other thing to that would cause your poor idle and stalling is a bad or dirty EGR valve which can be cleaned with Carburetor cleaner since it's stronger then the Throttle body cleaner, just remove the EGR and spray the Carbon build away and place back in place. Note: the Carb cleaner is to strong for the gaskets used on the throttle body so don't use it on the throttle body. Good luck and this should help get your Explorer running 100% soon.

Jul 09, 2009 | 2001 Ford Explorer Sport

2 Answers

I have a 89 nissan 4x4

Have you checked the EGR valve yet? Or check your Fuel regulator or pump.

Feb 05, 2009 | 1989 Nissan Pathfinder

Not finding what you are looking for?
2006 Chrysler 300 Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides