Question about 2007 Mitsubishi Raider LS

1 Answer

Do i need to buy special harness to conect the lights hitch??

Posted by on

  • Richard Scordino May 11, 2010

    I'd check with the dealer on that...many need an intermediate part to avoid damaging module. You can't just splice into wiring.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 333 Answers

You should have a standard 4 pin trailer harness on/under your bumper unless you have a very early model 07.

HOWEVER, certain later models of Raider did not have the turn signals activated in the FCM, and you will only have park/brake lights until they are activated. If this is the case with yours, there is no charge to activate them if you are under warranty.

If you have an early model and do not have a connector for trailer lighting, you have the option of getting the factory harness or an aftermarket one.

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2001 Chevy Silverado and my brake light hitch cover isn't lighting up when I hit the brakes. The 4 pole connector is hot(getting power) but the brake light cover isn't lighting up when I hit the...


Check connection and ground. Since the brake light pin on your wiring harness has power, check that the wiring harness ground pin has zero ohms to ground. If the harness is good and the hitch light works on a battery, then there is either a bad connection from the pin to the hitch light or from hitch light to ground.

Dec 17, 2014 | 2001 Chevrolet Silverado

1 Answer

How do you hook up trailer lights so i can pull a trailer


If you bought the Honda hitch kit, a wiring harness and instructions are included. If you bought a different kit, buy the wiring harness from Honda. The harness connects to a plug located in one of the accesses panels in the back. You will have to take off the. Bumper facia to route the harness to the hitch. Be sure to use the rubber grommets to prevent the sheet metal of the rear quarter panel from wearing through the wire insulation and causing a blown fuse.

Aug 07, 2011 | 1997 Honda Passport

1 Answer

Is a special "powered" module


I would use a Curt 56024 T-Connector Kit. This lets you connect the wiring kit without needing to splice any wires.

May 24, 2011 | Hyundai Veracruz Cars & Trucks

1 Answer

Does a 1994 buick centry come with a hitch and if not what is every thing that i need for a hitch


No it's doesn't come with a hitch. To put one on you'll need to know what capacity hitch you need, towing weight of what is to be towed. A wiring harness to connect to the vehicle's brake lights, taillights and turn signals. U-Haul sells and installs hitches.

May 09, 2010 | 1994 Buick Century

1 Answer

2008 dodge 1500 4wd tail light wire harness color code with trailer hitch


If you adding a trailer light harness, you can buy a seperate harness from most auto parts stores that will plug right in. There should be a connector near the rear of the truck that you can unplug, and add the trailer harness. It's simple and fast and you don't end up making a mess of your wiring. I suggest puting some "dielectric grease" on the connections to prevent corrosion.
Flat 4 connector.
Brown is tail lights and marker lights.
Yellow and Green are turn and stop. I think yellow is left.
White is ground.

Mar 19, 2010 | 2004 Dodge Ram 1500

1 Answer

Where do i find the wiring adapter for the lighting wiring for a tow hitch


You may have a tow hitch but no wire harness? You gotta buy a trailor wire harness kit and may need a professional to hook it up because there are a lot of wires to deal with. Normally the hookup it mounted near the hitch it self, but my guess is you don't have one.

Aug 21, 2009 | 1993 GMC Safari

1 Answer

Towing light problem on wiring them up.


It looks like there could be a service bulletin to fix this.

TO: ALL TOYOTA DEALER PRINCIPALS,
SERVICE MANAGERS, PARTS MANAGERS
SUBJECT: SPECIAL SERVICE CAMPAIGN 10H
(2000 TUNDRA AND 1999 - 2000 TACOMA TRAILER TOWING WIRE HARNESS
CONVERTER REPLACEMENT)
Toyota will initiate a Special Service Campaign to replace the Toyota Trailer Towing Wire Harness
Converter (converter) on certain 2000 model year Tundra and 1999 - 2000 model year Tacoma
vehicles equipped with a genuine Toyota Trailer Towing Hitch or Bumper Hitch. This accessory
is included in the Towing Hitch Kit installed at ports (PIO) and by dealers (***); it is also sold by
dealers as an over-the-counter or service part.
An electrical short or open circuit can cause a fault in the genuine Toyota Trailer Towing Wire Harness
Converter (converter). This can cause a failure of the converter, and if a trailer is being towed at the time,
non-operation of the trailer lights. In limited cases, the converter housing could become heat-deformed.
In the case of the Tundra, the circuitry utilized in the converter was inadequate to properly manage
vehicle and/or trailer-side voltage spikes. If the converter is exposed to a voltage spike it may cause an
electrical short or open circuit within the converter.
As for the Tacoma, due to deficient waterproofing and improper installation location of the converter,
which is mounted in the lower portion of the taillight cavity of the vehicle, an electrical short circuit will
occur if water enters the converter housing.
The following vital information is provided to inform you and your staff of the campaign notification
schedule and your degree of involvement.
1. Owner Notification Letter Mailing Date
The owner notification will be conducted in two phases:
• The first phase will be launched in late August and involve vehicles equipped with port
installed (PIO) genuine Toyota Towing Hitch Kits.
• The remaining vehicle owners, whose vehicles may be equipped with a dealer installed (***)
genuine Toyota Trailer Towing Wire Harness Converter, will be notified in the second phase
to be launched in early September.
We have attached copies of the owner notification letters for your reference.
If you are contacted by an owner of an involved vehicle, who has not yet received a notification,
please verify eligibility through TDN or TIS, inspect the vehicle to assure it is equipped with the
affected part, and perform repairs as outlined in the attached Technical Instructions.

Jul 12, 2009 | 1999 Toyota Tacoma PreRunner

1 Answer

I need to wire my 4 runner


usually if you look under the rear bumper or behind one of the taillights you should already have the harness there for the setup just buy the plug and hook up the wires by going with same color

Jun 22, 2009 | 1996 Toyota 4Runner

1 Answer

2008 subaru outback


Best to pop in to your local Subaru dealer and ask them what is required for wiring in a trailer plug, a lot of new vehicle require special equipment to prevent damage to the electronics that control the lighting on the vehicles, especially those that have LED style lights on them. Get a quote from them on cost of them doing the job, and for the parts only if you want to get someone else with a cheaper labour rate to do it.

Hope this helps,
Mark.

Nov 02, 2008 | 2008 Subaru Outback

6 Answers

Trailer wiring for 2005 Ford Escape without factory tow package


I had the sam problem with my '02 escape when I installed the hitch. I changed the turn signal relay under the dashboard on the drivers side of the dash with one from an escape that had a tow package(one was blue and the other was yellow...). worked fine for me after that. Don't know if it changed later...

Oct 17, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2007 Mitsubishi Raider LS Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...