Question about GMC K1500

1 Answer

How to install passenger side glass on a 1997 gmc sierra 1500. power windows.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Remove the clips and screws securing the old window to the arm and slide it out through the top of the door (may need to be maneuvered out)

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 gmc Sierra driver side door panel quit working, locks quit, seat heater quit, windows quit, passenger side works fine


The most likely culprit is your driver's door control module... it's built into the driver's window switches. Double-check all your fuses before replacing any parts.

Jan 27, 2013 | 2003 GMC Sierra 1500

1 Answer

How do you clamp the regulator to passenger door if the window clamps are in the way on a 2003 GMC Sierra? The window clamps won't go down much, I just have to clamp the regulator and crew it down and then...


Its best to attach the regulator to the door frame with the bolts first. Then plug in the motor and run it to the bottom. Then attach window glass to regulator, with the bolts. Do Not run the window up to the top without the glass attached. The cables will run off the end of the regulator channels. Approximately half way up the window to glass bolts will also line up thru holes in the frame. You can disattach the glass and hold it in place by simply using duct tape to the glass and the upper door frame. It will stay in place.

Apr 04, 2011 | 2003 GMC Sierra 1500

1 Answer

How do I install a new rt rear turning signal light on a 1997 GMC Sierra 1500 short-bed offroad?


Lower tailgate remove two screws on side of light t15 torx or phillips remove light. middle bulb is signal.To remove bulb push release tang and turn left to remove. Good time to change all bulbs. Same on other side

Feb 05, 2010 | 1997 GMC Sierra

1 Answer

My Power window on my 2003 GMC Sierra 1500 Truck


if your main switch panel still works the passenger window and if door locks still work probaly bad window motor

Oct 21, 2009 | 2003 GMC Sierra

1 Answer

Pass. side front and rear power windows stopped working


if they only stoped working on the passengers side I would check the wirring going into passengers side door for a broken wire, or right at the passengers side kick panel.

Mar 14, 2009 | 2008 GMC Sierra 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...